2 /3 way zone fan coil unit valve (dn15 ~ 25) Use fully-enclosed one-way hysteresis synchoronous motor, with spring return and water -proof function. The actuator assembles the valve body quickly and easily without the need for linkages and calibration. Spring return Detachable Close-off pressure = 0.16 mpa Voltage:220v-50/60hz (110v also available)
Actuator: Torque: 500n, 1000n, 1800n, 3000n Control type: modulating / 3-point floating Input signal (for modulating): 0 ~ 10v or 0 ~20 ma Compatible with johnson controls actuator, such as va-7152-1001, 7200-1001, va-7202-1001, ra-3000, ra-3041, etc Manual override is optional 2 port brass valve: Dn: 15 / 20 / 25 / 32 / 40 / 50 / 65 / 80 Equal percentage. Compatible with johnson controls brass valve
1. Large lcd display with backlight; 2. Lcd disply shows both set point and room temperatures simultaneously. 3. Auto fan speed with adjustable 3 fan speeds. 4. Sleep mode #voltage:220v-50/60hz (110 also available) #dimensions:86 x 86 x 15mm
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Product Specification and Steel Grade ASTM JIS AISI EN Mill\'s Standard S30100 SUS301 301 1.4310 S30400 SUS304 304 1.4301 S30403 - 304L 1.4307 S31008 SUS310S 310S 1.4845 S31603 - 316L 1.4404 201 S32100 SUS321 321 1.4541 202 S41008 SUS410S 410S - 204Cu3 S43000 SUS430 430 1.4016 S43932 - - 1.4510 S44400 SUS444 444 1.4521 S44500 SUS430J1L - - Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL Tolerance of Width W < 100 mm 100 mm �?�?�?�¢?�?�?�?�¦ W < 1000 mm �?�??�?�?�?�± 0.10 mm �?�??�?�?�?�± 0.25 mm Chemical Composition & Mechanical Property : Steel Grade Ni% Max. Cr% Max. C% Max. Si% Max. SUS301 6.0~8.0 16.0~18.0 0.15 1 SUS304 8.0~10.5 18.0~20.0 0.08 1 SUS304L 9.0~13.0 18.0~20.0 0.03 1 SUS310S 19.0~22.0 24.0~26.0 0.08 1.5 SUS316L 12.0~15.0 16.0~18.0 0.03 1 SUS321 9.0~13.0 17.0~19.0 0.08 1 SUH409L 0.6 10.5~11.75 0.03 1 SUS410S 0.6 11.5~13.5 0.08 1 US420J2 0.6 12.0~14.0 0.08 1 SUS430 0.6 16.0~18.0 0.12 0.75 Mechanical Property (For Reference) Steel Grade N/mm 2 MIN. Tensile Stress N/mm 2 MIN. Proof Stress % MIN. Elongation HRB MAX. Hardness SUS301 520 205 40 95 SUS304 520 205 40 90 SUS304L 480 175 40 90 SUS310S 520 205 40 90 SUS316L 480 175 40 90 SUS321 520 205 40 90 SUH409L 360 175 25 80 SUS410S 410 205 20 88 SUS420J2 540 225 18 99 SUS430 420 205 22 88
Supplier: Valves, pressure & temperature gauges, expansion bellows (metallic and rubber), rubber products and other industrial items.
Product Details: Unit Length 3 m, 6 m Material Grade 316,316L Thickness/Diameter 2-3 inch, 3-4 inch, 1-2 inch, 0-1 inch Brand Cromonimet,Steel,Ltd Single Piece Length 3 meter Hardness Soft Surface Finishing Smooth Technique Cold,Rolled Anodised Yes Tolerance As,per,H9,&,H11 Payment Terms After,discussion Third Party Inspection Tpi YES Test Certificate Provided Pipe Fluid Water, Gas, Steam Size >40 mm,1-10 mm,10-20 mm,20-30 mm,30-40 mm,50 mm Material Stainless,Steel Application pharmaceuticals Condition New Features: Easy to use Less maintenance Precise engineering Applications: Ball Valves, Needle Valves, Filter Valves, Connectors, Couplings, Plugs, Hose Ends, Manifolds, Nuts, Bolts
Product Details: Single Piece Length 3 meter, 6 meter Thickness/Diameter 2-3 inch, 3-4 inch, >4 inch, 1-2 inch, 0-1 inch Condition New Corrosion Resistant Yes Application Construction Finish smooth Hardness soft Is It Anodised Anodised Minimum Order Quantity 500 Kilogram Application Manufacturing, Construction Single Piece Length 3 meter, 6 meter Thickness/Diameter 0-1 inch, 1-2 inch, 2-3 inch Brand Cromonimet Steel Ltd SS Bright Round Bar.Specifications: Condition cold drawn & polished cold drawn, centreless ground & polished cold drawn, centrelessGround & polished (strain hardened) Grades 202, 303, 304, 304l, 310, 316, 316l, 32, 410, 420, 416, 430, 431, 430f & others 304, 304l, 316, 316l Diameter (size) 2 mm to 5mm (1/8" to 3/16") 6mm to 22m (1/4" to 7/8") 10mm to 40mm (3/8" to 1-1/2") Diameter tolerance h9 (din 671),h11 h9 (din 671) h9 (din 671),h11 astm a 484 astm a 484 astm a 484 Length 3/4/5. 6/6 meter 3/4/5. 6/6 meter 3/4/5. 6/6 meter (12/14ft/20feet) (12/14ft/20feet) (12/14ft/20feet) Length tolerance -0/+200mm or -0/+200mm or -0/+200mm +100mm or +50mm +100mm or +50mm (-0 /+1 feet) (-0 /+1 feet or +4 or 2 ) (-0 /+1 feet or +4 or 2 )
Supplier: Ss/ms pipe fittings, flanges, thermowell, sight flow indicator, liquid level gauge, half round sheet, boiler tube protection shield/bend, cassette baffle, perforated sheet, corrugated sheet, rods, angle etc.
