Description DEEP POUR 2 PART RESIN CRYSIN5.0 is a crystal clear two-part epoxy resin system which can be poured at 5cm once. Low oder and zero VOCs makes CRYSIN5.0 an ideal resin for large projects, makin jewelries, or epoxy incorpotated furniture. Mixing Ratio for Crysin 5.0 is 3 (Resin) : 1 (Hardner) At room temperature 25 C (77 F) : 24~48 Hours Curing time may vary depending on the room temperature and humidity. 6 16 Hours after first coating (Dry to touch) 5cm Key Features 1. Crystal clarity 2. Self-defoaming 3. Shore D Hardness of 80 or above 4. Deep casting between 25-50mm per pour 5. Naver top-selling products Cautions 1. Do not drink 2. Do not add the liquid into a spray bottle 3. Keep out of reach of children and infants 4. Do not throw the container 5. Do not leave the product on skin for long duration. Rinse skin with warm running water and soap 6. Wearing protective gloves, protective clothing, eye protection is recommended 7. Store the product in a well-ventilated area away from heat/sparks/open flames/hot surfaces 8. In case of fire, use alcohol-resistant foam, dry powder, or sand The price on this site is based on the smallest size of Crysin 5.0 which is 400g and MOQ of 1000 sets. For quotes on larger sizes please enquire.
Identification of 693-58-3 Name: 1-Bromononane (Related Reference) EINECS: 211-755-2 Molecular Formula: C9H19Br CAS Registry Number: 693-58-3 Synonyms: Bromononane; 98%; 1-Bromononan; n-Nonyl bromide; 1-Bromo-n-nonane; 1-bromo-nonan; 1-n-Nonyl bromide; 1-n-Nonylbromide; 1-Nonyl bromide; 1-Nonylbromid; 1-Nonylbromide; n-Nonyl-1-bromide InChI: InChI=1/C9H19Br/c1-2-3-4-5-6-7-8-9-10/h2-9H2,1H3 HS Code: 29033036 Molecular Structure: 1-Bromononane C9H19Br (cas 693-58-3) Molecular Structure This structure is also available as a 2d Mol file Chemical Properties Appearance: colourless liquid Molecular Weight: 207.15 Density: 1.084 Boiling Point: 201â?? Melting Point: -29 Flash Point: 90â?? Storage Temperature: Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Refractive index: 1.453-1.455 Solubility: Water Solubility : immiscible Stability: Stable. Incompatible with strong oxidizing agents, strong bases. Safety Data of 693-58-3 Risk Codes: R20;R36/37/38 Safety Statements: S26;S37/39 MSDS infomation: 1-Bromononane (693-58-3).msds
Polo shirts, activewear, sportswear, t shirts, sweatshirts, bomber jackets, varsity jackets, leather jacket, denim jackets, hoodies, basketball uniforms, soccer uniforms, soccer ball, football, tennis ball, goalkeeper gloves, boxing gloves, goal keeper gloves, quilted jackets, puffer jackets, down, jackets, tracksuits, shorts, tank tops, trousers, sweatpants, surgical instruments, dental instruments, beauty instruments, scissors, activewear, sportswear, streetwear, swimwear, loungewear..
Solvent Black 27 (Oil soluble black BL) CAS.NO. 12237-22-8 The application of metal complex solvent dyes, for more color,contact me: oopscolor mouse 163 com Ink: solvent based ink ,printing ink for Aluminum foil ,printing ink for paper and the surface of metal (screen printing ) Coating industry:1.Wood stains coating�?� 2..Aluminum foil coloring(hot stamping material) � 3.metal coloring (low temperature baking finishes ).4.special coating Other industry : 1.ink for ball pen and stationery 2,plastic coating (vacuum plating ) 3. Leather coloring 4:shoes polish coloring
Our company offers coconut sugar for export. Prices from the manufacturer. In stock : Organic Sugar Granulated Palm Sugar Light Muscovado Dark Muscovado Super Ball Muscovado Demerara Gold MOQ: (01) one container. Our prices are based on FOB port (Incoterms-2020) and are preliminary. The final cost of each product will be agreed upon depending on the volume of the lot. But we also organize logistics to any port. Shipment by sea on terms of CIF port and FOB , placing in 20 feet and 40 feet containers. Our terms of cooperation and payment method: Payment - 30% prepayment and 70% against scanned original documents L/C 100% Loading time: 10 days after receiving the advance payment or opening the original letter of credit. Inspection: Sunrise/SGS/Cotecna/Vinacontrol by Seller's choice Certificates: ISO 22000:2018, HACCP, FSSC 22000, FDA, HALAL.
Stack & Sturdy Construction: This puzzle cat toy is made of ultra-strong and tear-resistant PP that stands up to crazy cat scratcher antics, a detachable multi-layer for easy cleanup, with a non-slip base to prevent product rollover. So it is perfect for one or more cats. Spinning Balls Keep Cats Busy: The puzzle cat toy stimulates your cat s senses and hunting instincts, this will increase their sensitivity and will not cause persecution on the furniture at home. Keep Away Lonely: This puzzle cat toy provides hours of exercise & self-amusement for health care and elimination of boredom and pet depression since your cat can play alone when the master is not at home. Play Together: Two or more cats play with this puzzle toy together, which will make the cat happier and enhance each other friendship.
Product description The ST-200 drilling rig is a lightweight shallow hole rig with oil pressure feed. Suitable for census exploration, geophysical exploration, road and building exploration, and small well drilling. 1. It has automatic hydraulic feeding mechanism to improve drilling efficiency and reduce labor intensity. 2. The use of ball card type clamping mechanism, can achieve non-stop bar, easy to operate, safe and reliable. 3. The handle is concentrated, easy to operate. It is equipped with a bottom pressure gauge to indicate the pressure, which is convenient for grasping the inside of the hole. 4. Compact structure, the drilling machine, water pump and power machine (diesel or electric motor) are assembled on the same base, occupying a small area of the airport. Light weight, high decomposability and easy to move.
Turntable input shaft accessories ZJ32L6 input shaft assembly AF60001-02.03.00 BOP accessories FZ35*35RS gate assembly 73mm FZ897.21.03.00 Z07140000011AA Rear outrigger cylinder Power selection box accessories SNC40-17 Discharge Cap Seal Special accessories for cementing tools BCSG-N casing pressure test joint 411*10 3/4" ladder buckle Drilling rig top drive accessoriesDQ40/50/70 torque table 1.23.08.03 Winch drive shaft accessories JC-450 spring T75020503 Positioning pin of backup tongs 200FYY482A Valve assy Drill pipe clamp accessories ZQ203-125 Adapter I 19.750-04 GT350E Cooling Appliance*Dashboard assembly Stop tooth 1.02.15.008 59144P290099 HYDRAULIC HOSE: ASSY COUNTER BALANCE Drill pipe clamp accessories ZQ203-125 Sliding sleeve 19.600-03 Screw: Cap-SOC HD (UNC) 50103-8-S TIMKEN bearing NU236EMA ROLLER 71847 56712-8-8-S ELBOW, 45DEG-EXT PIPE PIN, LOCK PAWL, ROTARY TABLE, RT275, NOV 105.06.04-1 Winch intermediate shaft accessories ZJ32L6 intermediate shaft assembly AF60001-02.04.00 Hydraulic tank accessories F-1600 Mud pump hydraulic valve puller manual hydraulic pump and pipeline 203.2mm (8") GT550E Universal Security LevelCylinder hydraulic hose AA1701081100 Rope retaining frame 75611 KNOB Turntable climbing shaft II accessoriesZJ-45J pin spring 4*40*150 TUBE ASSEMBLY, BRAKE 110172 Screw drill 5LZ244DWF-5 grade double support 244mm 7.0MPa 120â?? Horizontal sand pump SB 55kW 150GZ Elevator Accessories CD InsuranceSear 131*134/350 DUEL LIP OIL SEAL 5''X6.25''X0.625'' BOMCO AH130101-0406 H11-1000-02A VOLVOFM12 chassis* Large cab shock absorbers Washer: Lock Star 3/8" ID 87074-06-B Hydraulic tank accessories F-1600 Stud bolt M39*3-39*2-185 Electric control box FKDQ640-7 Pneumatic pump QYB35-175L BOLT, HEXAGONAL, M20X80, FOR DRAWWORKS, MODEL: ZJ40DBST, MAKE: HH, P/N: GB/T27-88 Winch drive shaft accessories ZJ-45J sprocket 2Z=31 106.02.01.19 sprocket P3500057AA Winch intermediate shaft accessories ZJ-45 snap ring 106.02.20.19 587-21-2 Power selection box accessories SNC40-17 Elbow 2" 90�° Pin: Retainer (Painted Yellow) 111049-1 TIMKEN bearing NU238EMAC3 E10773 56702-12-8-S ELBOW, 90DEG-EXT PIPE E33-1015-010 Isolater: Upper Bearing Large 30180916 BOLT; 23522281; DETROIT DIESEL; ENGINE DETROIT DIESEL; PALLET MOUNTING, Steel Detroit Diesel PartsElectrical instrument system * high temperature water pressure sensor X00E50702205 Hydraulic control unit ZJ30-10-07-00 for hydraulic system ZJ-20 Screw 50182-8-03 82749 ELEMENT,FILTER,TDS 190 series diesel engineParts lubrication system *lip seal ring PG130*160*15HG4-6 Wheel Excavator PartsXCMG 50G loader gearbox filter assembly Hydraulic tank accessories F-1600 JA-3 shear safety valve GH3161-28.00 Deep groove ball bearing 217 ND1250 Cooling Appliance*Generator belt AV10*1150 Packing washer P100652 (CL9007.01)seal 6Y-4003 58644P350072 HOSE ASSY
GT550E Universal Safety OutriggersPressure Switch CABLE, SHIPBOARD-MULTICORE 56625-1.5-03 Retulator F/Purge System 7817991 PIN W/INLINE FLANGE-WHT 117513-PF-WHT Wear disc seal AH160201-0115 YZ101.55.11 Rope guard Drill pipe tong accessories ZQ203-125 notch gear 01.01-37M Drill pipe power tong accessories ZQ203-100 pin 010101-04M M16-1001-01B BEARING BALL FOR CASING TONG MODEL: 16-25, MAKE: WEATHERFORD, P/N: 107454.001 NK400E Universal* pourMirror assembly PLUG, PIPE, C'SUNK HEX 53000-4-C Fluid loss reducer for drilling fluidJX-JL modified starch PDC bit 215.9mm BRS1655 Borui Brake device accessories ZJ-70 Piston pump A10VSO10DR/52R Brake device accessories ZJ-30C Extension spring JJ3-6-5/P9000052AA FZ35-70 oil pipe O shapeSealing ring �?26.5*2.65 JK00213-15 TORQUE FORCE ROD , JC030804 Drill pipe clamp accessories ZQ203-100 Fork 02-12M NATIONAL Mud pump SEAT 1561572 Loss-while-drilling agent SDL YZ101.55.50.04 Plate CHECK VALVE 94536-275N Drill pipe tongs accessories ZQ203-100 adjusting screw M24 0105-14M Drill pipe power tong accessories ZQ203 pipe sleeve 125 19.750-14 Gland Cable Brass Hazadous Area 501/453/Univ/C/M3 Hawke Electric control box FKQ640-6Driller fully sealed safety cover 7PK.02BJ-51B-00 FS-0375NC-0100 Power selection box accessories JR5321TSN gearbox oil pressure gauge C050020852A 85039-7 PLATE,PARTITION 50016-20-C5D SCREW: Bolt, Stand-Off M614004316 35�?35 BOP AccessoriesFZ35*35RS variable diameter ram assembly 41/2"-7" N10337 BDFS Low noise explosion-proof fan CABLE PIPEHANDLER RETENSION P614000139 91224 BUSHING,SLEEVE,1.12X1.38X1.75LG NK400 Fuel*Airfilter element E19-1008-030 YZ101.55.19 Plate 6 20 SLEEVE, MAIN SHAFT 110040-1 Head Assy:Grabs Die Nc-50 2028627 Detroit S60 DieselAccessories fuel system*diesel filter element 23518482 VOLVOFM12 startMachine * engine bracket fixing screw 161100115 REDUCER, O-RING BOSS 56556-16-12S NB800G.24.09A Backing ring R44 S01-1390-01N 115423 HYDRAULIC TUBE: MANIFOLD/LOAD STEM TDS Cable: Armored 3 Core With Shield 56625-1.5-03 Detroit Diesel Engine Parts Fuel System*Injector 16V149 5235820 ELBOW 1/2'' NPT 56606-8 Wear plate 2 1.03.14.363 35�?35 BOP Accessories2FZ35-35 rubber core screw JK212-40S-1-5 NB800G.05.09 Stud bolt M39x3-6gx262 Remote Console Accessory FKQ6406 Lubricator QAL-4000-04 GT550E Universal* Telescopingcylinder hose Hydraulic tank accessories F-1300 valve box LATCH SPRING, FOR ELEVATOR, MODEL: DDZ-250 P/N: 130302017 Trunk accessories ZJ45Positive carriage shaft 024.21.31.08 Hydraulic tank accessories F-1300 Piston rod with cap TM-2145/NUT Pin: Bay 91060-500 Trunk accessories ZJ-40L Parallel transmission box 1# transmission shaft assembly BA70002-05.00B Drill pipe power pliers accessories ZQ203 air valve intake hose 100 05-05M 91251-4 SHIM, BEARING RETAINER
Yasmee Group of Company is one of the leading manufacturers of a variety of net, ladders and other utility based products. Use of ladders is known to all as it helps us to climb the upper level. We make sure that we use the finest quality of material while manufacturing the ladder so that the ladder can stand for longer time. The offered ladders are made after employing finest quality raw material like metal and other fibers in order to offer the errorless product to our esteemed clients. Salient Features: Long lasting life Lightweight aluminum is used Excellent abrasion resistance We tend to offer the highest client satisfaction as their satisfaction is our priority. We make use of rubber in the roof top ladders, as it lessens the chances of slippage. Our immense knowledge in the domain make us the most leading Roof Top Ladder Manufacturer in India and we work hard to sat in the position of being the best. The offered ladder is manufactured from robust extruded light weight aluminum, offered with a sliding device, elevation pads and Quick-action clamps. We make sure that we manufacture the ladders in such a way that it fulfills all your requirements to climb the roof. We manufacture the ladders in such a manner that it offers you the complete safety at the time you climb the ladder. We make sure that these ladders are your one time investment that is the reason we make it long-lasting. Moreover, we take the most reasonable price for the roof top ladders offered by us. It is manufactured from sturdy extruded light weight aluminium, provided with a sliding device, elevation pads and Quick-action clamps. IT COMPRISES OF 1. Ladder 3 m in Length. 03 Nos. 2. Half Ladder 1.5 m in Length 01 No. 3. Working platforms 0.6 m Length 03 Nos. 4. Quick-action clamps 18 Nos. 5. Elevating pads 15 Nos. 3 m Life Line and Screw Hook The system permits a linear coverage of 10.5 m from any point on a fragile roof. Working on the platforms is possible up to 1.2 m from the ladder path. For working beyond 1.2 m the ladder can be adjusted across the roof corrugations. Ladder System distributes the weight of the worker over several saddles to ensure that the weight is transferred equally to the load bearing structure of the roof for the safety of the worker, instead of the fragile corrugated roof.
Aluminium Sliding Door Matt Black We are in Top100 Aluminum profile manufacturers,Guangdong Top Brand, Guangdong Famous Trademark,we has focused on high quality extruded aluminium profiles for over 10 years in China. We are specialize in architectural,decoraitive, industrial aluminum profiles and professional in customized CNC Aluminium extrustion etc. Aluminium profile for Heavy duty Sliding Door Matt Black Quick details: Place of Origin: Guangdong, China (Mainland) Open Style: Sliding Type: Sliding Doors Brand Name: Yalian/Pailian/Zhongchang Position: Exterior Sliding Door Type: Partition Doors Model Number: ZHL20181007 Surface Finishing: Matt Black Door Material: Aluminum Alloy Basic info: Item: Aluminium profile for Heavy duty Sliding Door Matt Black Material: 100% aluminium profile alloy :6063-T5,6061-T6,6463-T5, 6082, 6013 etc. Size: 3m-6m or customized size Application Furniture, windows & doors, decorations ,industry, construction etc. Colors: Anodized, wood grain,powder coating, anodised polished and brushed, electrophoresis, flurocarbon powder coated etc. MOQ: 500KG for each profile OEM service based on customer designed drawings or samples Certification available ISO:9001, SONCAP , BV Certificate or customers Certificate Available Packing Details (1)Inside : packed with plastic protective film to protect each profile (2)Outside:packed with waterproof kraft paper Delivery time: (1)Die Developing and Sample test : 12-18days . (2)Production duration:25-30days after sample is confirmed by Buyer. Payment terms: T/T, 30% down payment while balance shall be paid off before delivery. Settlement term: Final payment shall be based on final actual physical weighing. Production capacity: 2400-3000 Metric tonnes per month. Production guarantee Surface color is able to sustain for 10~20 years for indoor using. Port: FOB Shenzhen, Guangzhou, Foshan FAQ: 1. What's the advantages of aluminum profile? a. The surface processing performance is good b. Chemical performance is stable, no magnetic, can be repeated recycling, is a virtuous cycle of metal materials. c. The elastic coefficient is small, can't afford to friction collision sparks, only the process of performance is the best.
Expanded Metal Mesh Expanded Metal Wire Mesh Rigidity Expanded Metal Mesh Expanded metal mesh is an intermediate raw material that allows light and air to flow freely through it and that has more rigidity than the sheet from which it was produced. Introduction of Expanded Metal Mesh Expanded metal mesh is an intermediate raw material that allows light and air to flow freely through it and that has more rigidity than the sheet from which it was produced. It is formed in an expanded metal mesh press and produced from any malleable metal sheet product. The plate, sheet, or coil is simultaneously slit and stretched into diamond-shaped openings. These openings are of uniform size and regularity. Expanded Metal Mesh Basic Types inch inch inch 1 inch Material Suitable for Expanding Carbon Steel, Aluminum, Stainless Steel, Galvanized, Copper, Brass, Titanium, Platinum, Zinc, Nickel, Silver, Gold Surface Finishes hot-dip, galvanizing, pre-galvanizing, anodizing, enameling, power coating, painting, plastic coating, etc Benefits The Flow of Light and Air Design Customization Design Flexibility Strength and Formability Applications Ceilings and roofs, Decorative dividers, Guards, Air and fluid filters, Fencing, Battery cells, Strainers, Partitions, Outdoor furniture, Speaker grills, Security walls, ceilings, floors, doors, Machine and window guards, Shelving and racks, Containers, Greenhouse benches Styles of Expanded Metal Mesh Regular (standard or raised) all expanded metal mesh is produced in regular form off the expanders. The strands and bonds are set at a uniform angle to the plane of the sheet. This gives added strength and rigidity, as well as a skid resistant surface. Flattened is manufactured by processing regular expanded metal mesh in a rolling mill. The rolling process reduces the thickness of the original base metal. Design Designations Strands The sides of the expanded metal meshdesign v Strand Thickness Thickness of the base material from which the sheet was produced. Strand Width Amount of metal fed under dies to produce one strand v Strand Thickness and Width Can be varied to create different openings. The width of the strand should equal or exceed the thickness of the base metal. SWD Nominal dimension, Short Way of Diamond v LWD Nominal dimension, Long Way of Diamond v Design Size Actual dimension SWD and LWD. Measured from a point to a corresponding point on the adjacent diamond. v SWO Short Way of Opening v LWO Long Way of Opening v Bond Where two strands intersect Applications Air and fluid filters EMI/RFI shielding Battery cells Ventilation systems Strainers Satellite and radar antennas Partitions Outdoor furniture Speaker grills Security walls, ceilings, floors, doors Machine and window guards Fencing
Description Introduction of Expanded Metal Mesh Expanded metal mesh is an intermediate raw material that allows light and air to flow freely through it and that has more rigidity than the sheet from which it was produced. It is formed in an expanded metal mesh press and produced from any malleable metal sheet product. The plate, sheet, or coil is simultaneously slit and stretched into diamond-shaped openings. These openings are of uniform size and regularity. Expanded Metal Mesh Material Suitable for Ex pandingCarbon Steel, Aluminum, Stainless Steel, Galvanized, Copper, Brass, Titanium, Platinum, Zinc, Nickel, Silver, Gold Surface Finisheshot-dip, galvanizing, pre-galvanizing, anodizing, enameling, power coating, painting, plastic coating, etc BenefitsThe "Flow" of Light and Air Design Customization Design Flexibility Strength and Formability ApplicationsCeilings and roofs, Decorative dividers, Guards, Air and fluid filters, Fencing, Battery cells, Strainers, Partitions, Outdoor furniture, Speaker grills, Security walls, ceilings, floors, doors, Machine and window guards, Shelving and racks, Containers, Greenhouse benches Styles of Expanded Metal Mesh Regular (standard or raised) - all expanded metal mesh is produced in regular form off the expanders. The strands and bonds are set at a uniform angle to the plane of the sheet. This gives added strength and rigidity, as well as a skid resistant surface. Flattened - is manufactured by processing regular expanded metal mesh in a rolling mill. The rolling process reduces the thickness of the original base metal. Design Designations Strands - The sides of the expanded metal meshdesign v Strand Thickness - Thickness of the base material from which the sheet was produced. Strand Width -Amount of metal fed under dies to produce one strand v Strand Thickness and Width - Can be varied to create different openings. The width of the strand should equal or exceed the thickness of the base metal. SWD - Nominal dimension, Short Way of Diamond v LWD - Nominal dimension, Long Way of Diamond v Design Size - Actual dimension SWD and LWD. Measured from a point to a corresponding point on the adjacent diamond. v SWO - Short Way of Opening v LWO - Long Way of Opening v Bond - Where two strands intersect Price Delivery Port : Tianjin Packaging & Delivery Delivery Lead Time : 15 days
TXM-500 Horizontal Machining Center can process the bigger component and as well as the indexing rotation process.Most suitable for multifaceted machining about the component, include milling,drilling ,boring and tapping.  Technical Characteristics : Powerful cutting capability with excellent precision and performance makes drilling and milling easily;High speed ,super pprecision and more reliable structure ;High rigidity .super efficient,high torque and heavy cut features ;make full use of higher productive and precision processing. Super-high processing efficiency: TXM-500 Horizontal Machining Center fertures in high rigidity ,stable performance and high performance-cost ratio,which is the optimal choice for sourcing horizontal machining center .  T-type base structure ,high-rigidity and slide way support .gantry column.hiigh rigidity saddle base .strong spindle support. X/Y/Z feeding drive system :high-torque servo motor directly connected with Φ50 bal screw by coupling ;both ends of ball screw are fixed and pre-stretched .High transmission rigidity structure ensure the positioning precision . Spindle transmission system :servo motor direct ransmission to high-precision spindle ;higher transmission efficiency ,lower noise and vibration;continuous output power for higher processing efficiency;specially-designed spindle from Taiwan . Anti-collision design to prevent nut base ,motor base and bearing base from colliding with each other for protect the machine precision . One-piece Oil-coolant separation system ensures that polluted lubricant adn coolant flow back separately ,prevent the coolant from being polluted . Newly-designed and fully-sealed cover:safe and convenient .
Description Two component Epoxy based anti corrosive primer pigmented with Zinc Chromate as corrosion inhibiting pigments. Recommended Use :- It is recommended as primer on M.S surface for original equipment manufacturing as well as for process industry as in various fertilizer, refineries, petrochemical, chemical and other plants, applied in diverse areas of tank exteriors, equipments, pipelines, structural steel, etc. Not to be used for immersion application. Physical Data COLOUR : Assorted FINISH : Matt SOLIDS BY VOLUME : 40 ± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS : SURFACE DRY : 60 90 minutes (At 65% Relative Humidity & at 30�°C) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy thinner 190 POT LIFE : 4 hours min at 30 C RECOMMENDED DFT : 30 - 40 au. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous topcoats. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipments used for above should be properly cleaned. Application :- By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in criss-cross manner and ensure the uniform application. Use quality brushes for paint application For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 psi For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Addition : Max 5% if required Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 psi
Description Two component Epoxy based anti corrosive primer containing red oxide and zinc chromate as corrosion inhibiting pigments Recommended Use :- Recommended as a primer on suitably cleaned mild steel surface in various fertilizer units, refineries, chemical and other plants, transportation industries, steel plants, cement plants, power plants, pulp and paper industries, pharmaceutical industries, etc. for application on tank exteriors, structural steel, pipelines, machineries, vessels, etc. The product is recommended as a primer for mild to moderate service conditions. Not to be recommended for immersed water condition Physical Data COLOUR : Red FINISH : Matt SOLIDS BY VOLUME : 40 + 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lt at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 23C DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : SURFACE DRY : 60 - 90 minutes HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application Application Data :- MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : Epoxy Thinner 190 POT LIFE at 30�°C : 4 hours min at 30�°C RECOMMENDED DFT : 30 40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated Rubber and Synthetic Enamel finish paints. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 p.s.i. For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : Max 5% if required Nozzle Orifice: 0.37- 0.42mm Nozzle Pressure : 1400-1800 p.s.i.
Description Two component Epoxy based anti corrosive primer containing zinc phosphate as corrosion inhibiting pigments Recommended Use :- It is recommended as primer on M.S surface for OEM's as well as for process industries like fertilizers, refineries, chemicals and other plants. It can also be applied in diverse areas of tank exteriors, equipments, pipelines, structural steel, etc. Not to be used for immersion application. Physical Data :- COLOUR :- Yellow FINISH :- Matt SOLIDS BY VOLUME :- 40 �± 3% THEORETICAL SPREADING RATE :- 13.33 sq.mt. / ltr. at recommended DFT of 30 �µ FLASH POINT :- Base : 23�°C Hardener : 23�°C DRYING CHARACTERISTICS :- SURFACE DRY : 60 to 90 minutes (At 30�°C & 65% Relative Humidity) :- HARD DRY : Overnight. FULL CURE : 7 Days SHELF LIFE :- BASE : 6 months HARDENER : 6 months SURFACE PREPARATION Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application Application Data MIXING RATIO :- Base : Hardener (As per our recommendation) APPLICATION :- By Brush / By Conventional Spray / By Airless Spray THINNER :- Epoxy Thinner 190 POT LIFE :- 4 hours min at 30�°C RECOMMENDED DFT :- 30 - 40 �µ. OVERCOATING INTERVAL :- MIN : 8 Hours MAX : 24 Hours COMPATIBILITY :- Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous topcoats. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth and apply uniformly over the surface. All equipments used for above should be properly cleaned. Application : By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application; however under adverse environmental conditions about 5% of thinner, by volume, can be added. . Apply evenly in crossed manner, ensuring the uniform application. Use quality brushes for paint application. For Conventional Spray application:- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 1.4 mm Nozzle Pressure : 40 - 70 p.s.i. For Airless Spray Application:- Thinner : Epoxy Thinner 190 Addition : Max 5% Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 p.s.i.
Single Facer Corrugated Cardboard Production Line (1) Steam heating. (2) Easy operating. (3) Equipment composition: Mill roll stand Single facer machine Bridge NC Slitting and Cut off Combined Machine Computer stacker - Effective width:1400mm-2200mm - Design Speed: 100m/min -150m/min - Mechanical configuration: NC Slitter and NC helical cutter and stacker - Min. Cutting length: 300mm - Max. Cutting Length:9999mm - Cutting accuracy: ±1mm(uniform speed), ±1.5mm(non-uniform speed) -Five groups 200 thin blade knife - Memory of 200 orders, man-machine interface, the screen displays formation, easy for machine operator modify or cancel order at any time. -Adopt Germany KEB servo system and high-performance synchronous servo motor. - Helical knives structure with HSS knife edge, serration type knife and scissor cutting with less shear force, keep the knives long life. - Host base and machine frame adopt gray cast iron to keep machine strong and stable. - Adopt 3 section up stacker, the paper board automatic side delivery after reach setting quantity. - Max. Stacking length 1.3m. - Fast change order in 3 seconds. - Adopt tungsten steel alloy thin blade, blade life more than 8 million running meters - Automatic or manual knives grinding is option, non-stop grinding knives improve production efficiency. Zhenhua is specialized in produce automatic partition machine, auto folder gluer machine, etc. As a world-class equipment manufacturing and service provider integrating R&D, production, sales and service of packaging equipment, we provide quality equipment, effective and convenient packaging solution for customers.
It is with the earth rare element cerium so cerium stabilized zirconia bead has the biggest specific gravity in all zirconia beads series and it is very suitable for some special industries and grinding materials, especially for milling and dispersing high viscosity pastes and high purity products. (1).Wear-resistant, corrosion-resistant products: paints, textiles, paints, printing and dyeing; (2). High strength, high toughness products: magnetic materials, piezoelectric ceramics, dielectric ceramics; (3).To prevents pollution: medicine, food, cosmetics; (4).Ceramics: Electronic ceramics, refractory ceramics, structural ceramics. Features: It has a gem-like hardness and density.Micro-structure of delicate, uniform, dense ceramics of the Quartet. Its excellent wear resistance and fracture toughness is particularly suited for grinding and dispersing high-solid-phase high-viscosity, high hardness of the paste. (1).Long working life: 30 times longer life than glass beads, 6 times than zirconium silicate beads. (2)High grindingefficiency: around 6 times than glass beads; 2 times than zirconium silicate bead (3).Excellent wear resistance and fracture toughness. Products Dimension Ball 0.4-0.6mm 0.6-0.8mm 0.6-0.8mm 0.8-1.0mm 1.0-1.2mm 1.2-1.4mm 1.4-1.6mm 1.6-1.8mm 1.8-2.0mm 2.0-2.2mm 2.2-2.4mm 2.4-2.6mm 2.6-2.8mm 2.8-3.0mm Physical parameters Composition Wt% 20% CeO2 + 80% ZrO2 Specific Density g/cm3 6.0 Color Yellow/Gold Bulk Density g/cm3 3.85 Hardness Mohs 9 Elastic Modulus GPA 200 Thermal Conductivity W/m.K 3 Crushing Load KN 2000(2mm) Fracture Toughness Mpam1-2 8.5 Thermal Expansion Coefficient 10*10-6/â??(20-400) 9.0 Wear Loss ppm/hr
Advantages of PFA Constant-Pressure Separating Funnel: 1.Excellent Chemical Resistance: The PFA material possesses remarkable corrosion resistance, able to withstand harsh chemicals like acids, bases, and salts without degradation. 2.High-Temperature Stability: It maintains its performance and lifespan even in extreme temperature conditions, ensuring reliable operation in high-temperature environments. 3.Accurate Control: The constant-pressure design ensures a uniform and precise flow rate, crucial for high-precision experiments and applications. 4.Ease of Cleaning: The smooth surface of PFA prevents the adherence of contaminants, making cleaning quick and effortless. 5.Excellent Sealing: The well-designed funnel boasts excellent sealing properties, minimizing the risk of volatilization and leakage of chemicals. 6.Transparency: The high transparency of PFA allows for easy observation of the liquid interface and precise control of the separation process. 7.Durability: With improved mechanical strength and wear resistance, the PFA material ensures longer service life and reduced maintenance costs.
