Description
Introduction of Expanded Metal Mesh
Expanded metal mesh is an intermediate raw material that allows light and air to flow freely through it and that has more rigidity than the sheet from which it was produced.
It is formed in an expanded metal mesh press and produced from any malleable metal sheet product. The plate, sheet, or coil is simultaneously slit and stretched into diamond-shaped openings. These openings are of uniform size and regularity.
Expanded Metal Mesh
Material Suitable for Ex
pandingCarbon Steel, Aluminum, Stainless Steel, Galvanized, Copper, Brass, Titanium, Platinum, Zinc, Nickel, Silver, Gold
Surface Finisheshot-dip, galvanizing, pre-galvanizing, anodizing, enameling, power coating, painting, plastic coating, etc
BenefitsThe "Flow" of Light and Air Design Customization Design Flexibility Strength and Formability
ApplicationsCeilings and roofs, Decorative dividers, Guards, Air and fluid filters, Fencing, Battery cells, Strainers, Partitions, Outdoor furniture, Speaker grills, Security walls, ceilings, floors, doors, Machine and window guards, Shelving and racks, Containers, Greenhouse benches
Styles of Expanded Metal Mesh
Regular (standard or raised) - all expanded metal mesh is produced in regular form off the expanders. The strands and bonds are set at a uniform angle to the plane of the sheet. This gives added strength and rigidity, as well as a skid resistant surface.
Flattened - is manufactured by processing regular expanded metal mesh in a rolling mill. The rolling process reduces the thickness of the original base metal.
Design Designations
Strands - The sides of the expanded metal meshdesign v
Strand Thickness - Thickness of the base material from which the sheet was produced.
Strand Width -Amount of metal fed under dies to produce one strand v
Strand Thickness and Width - Can be varied to create different openings. The width of the strand should equal or exceed the thickness of the base metal.
SWD - Nominal dimension, Short Way of Diamond v
LWD - Nominal dimension, Long Way of Diamond v
Design Size - Actual dimension SWD and LWD. Measured from a point to a corresponding point on the adjacent diamond. v
SWO - Short Way of Opening v
LWO - Long Way of Opening v
Bond - Where two strands intersect
Price
Delivery Port : Tianjin
Packaging & Delivery
Delivery Lead Time : 15 days
Expanded metal mesh can be made from a range of materials, such as carbon steel, aluminum metal, stainless steel metal, nickel metal and so on. Expanded metal mesh are widely used as steel reinforcement materials in petroleum, chemical industry and building. Surface treatment hot-dipped, electrol galvanized, pvc-coated. Type a sizes: Long way of mesh: 12.5-200mm Short way of mesh: 5-80mm Thickness: 0.5-8mm Stand width: 0.5mm-10mm Expanded metal mesh at length from 1m-30m and width from 600-2400mm. Packing: pallet suilt for sea transport. Type b sizes: Long way of mesh: mini 3mm Short way of mesh: mini 2mm Thickness: 0.03-1.5mm Stand width: 0.03mm-3mm Expanded metal mesh at length from 1m-30m and width from max 1250mm Packing: inner pe bag, outer carton. Inner pe bag, outer carton.
Expanded metal mesh Materials : aluminum plate , thin low carbon steel plate, stainless steel plate, al-mg alloy plate, copper plate, nickel plate.
Expanded metal mesh Materials : aluminium plate , thin low carbon steel plate, stainless steel plate, al-mg alloy plate, copper plate, nickel plate. Weaving and characteristic: it is punched to mesh, including aluminum plate mesh, small steel plate mesh, steel plate mesh and stainless steel plate mesh ;according to the hole, it is divided to diamond, square, round, triangle, scale hole. It is strong and wear resisting, artistic and tasteful. Uses: used wide in road, railway, civil building, water conserrancy's building; the protecting of all kinds of machines. Electrical equipment, window and aquatic product's breed.
We have been engaged in producing and selling of expanded metal mesh for over 10 years. Expanded metal mesh can be made from a wide range of materials, chiefly expanded steel mesh, aluminum expanded metal mesh, expanded stainless steel, expanded nickel and other metal , as steel reinforcement materials in petroleum, chemical industry and building decorations. Thickness available from 0.5mm to 8mm. According to clients' requirements
Expanded metal mesh can be made from a wide range of materials, chiefly expanded steel mesh, aluminum expanded metal mesh, expanded stainless steel, expanded nickel and other metal , as steel reinforcement materials in petroleum, chemical industry and building decorations. Thickness available from 0.5mm to 8mm.
The introductions of product: Materials:aluminium plate.Thin low carbon steel plate.Stainless steel plate.Al-mg alloy plate.Copper plate.Nickelplate. Weaving and characteristic:it is punched to mesh, in-cluding;aluminium plate mesh.Small steel plate mesh, steel plate mesh and stainless steel plate mesh;according to the hole, it is divided to diamond, square.Round.Triangle.Scale hole, it is strong and wear-resisting, artistic and tasteful. Uses:used wide in road.Railway.Civil building.Water conserrancy's build;the protecting of all kinds of machines.Electrical equipment, window and aquatic product's breed No
Expanded Metal Mesh The basic type of Expanded wire mesh are standard expanded metal mesh(also called regular or raised expanded metal), flattened expanded metal, expanded metal grating The basic type of Expanded metal mesh are standard expanded metal mesh(also called regular or raised expanded metal), flattened expanded metal mesh, expanded metal grating, architectural decorative expanded mesh and fine meshes. Expanded metal comes from the press after having been die cut and expanded. Flattened expanded metal usually 5% lighter than raised expanded metal. And heavy expanded metal grating is easy to install and maintain, and it has better benefit in slip-resistant surface on stairs, platform, catwalk and pedestrian walkways. Features of Standard Raised Expanded Metalï¼? Economical. Durable. Extremely versatile. Easy installation. Low resistance to wind loads. Easily cut to fit. Many material options, such as carbon steel, stainless expanded metal, and aluminum expanded metal. Skid resistant.
Expanded Metal Mesh Expanded Metal Mesh supplier custom Expanded Metal Mesh Stainless Steel, Aluminum, Brass, Architectural & Decorative Metal Facade Description: Materials: Stainless Steel, Aluminum, Brass, The Expanded Metal through machine stamping, drawing, rolling flat and surface after the dip treatment, bright color, no rust, durable. custom Expanded Metal Mesh Surface Treatment: Anodized, PVDF, Powder Coating Expanded Metal Ceiling Panel can be used as the interior ceiling of the workshop, hotel, the railway station waiting area, conference room etc. Usually we use the aluminum alloy expanded sheet or Powder coating carbon steel expanded sheet for the ceiling. It has the the characteristics of light weight, good looking, high visibility ,good acoustic absorption performance, easy installation and maintenance etc. The sheet size of the expanded metal ceiling can be 1.0-2.0m . Different sizes are available according to the customers' application. Expanded Metal can be used as the the interior curtain wall of the office building , stadium, airport, railway station etc. Usually the curtain wall use the aluminum expanded sheet, SS 304/ SS 316 Expanded Sheet as the raw material. The aluminum curtain wall special designed is beautiful and generous on appearance. It has the characteristics with good rust protection, easy installation and Maintenance etc. If you are finding architectural & decorative metal facade or spiral architectural wire mesh in China, we will be your best choose! We have our own factory, so we can give you a cheap price! For more information on wire mesh, please click here.
We are professional manufactuer for different styles of aluminum metal mesh with many years experience. We have our design team and can independently research new products, customization is also acceptable.
Expanded metal mesh which can be used for exterior facade is a form of metal sheet with various shaped openings in the area. It can be made of a range of materials, such as carbon steel, aluminum metal, stainless steel metal, nickel metal. But aluminum expanded metal mesh is the most common than others because of its lighter weight and better corrosion resistance. Besides, after being expanded by machine, the expanded metal mesh becomes stronger, lighter, and more rigid as well as having a skid resistant surface. With so many good features, it becomes a new type of building materials mainly used as elegant building exterior facade. It is specially designed to minimize installation time and installation cost. It can be widely used in various kinds of buildings, office building, shopping mall and so on. Its high visibility and guarding properties can let you benefit a lot. By using the advanced production technology and equipment to ensure the quality of the metal mesh, we can offer you various kinds of expanded metal facade mesh in different sizes to meet your special requirement. Production process Expanded: The expanded process is using the automatic expanded machines to cut the metal sheet in the transverse direction and at the same time stretch in length without loss the material. And then pass through a cold rolled reducing mill. During the process the length of the sheet is prolonged about 5%, but the width of the sheet remains the same. Surface processing: anodizing aluminum expanded metal mesh, powder coated aluminum expanded metal mesh, and PVC coated aluminum expanded metal mesh, etc. Features Anti-corrosive. Durable and economical. High visibility and guarding properties. Available in various colors. Low wind resistance. Good ventilation properties. Easy cutting and installing. Light weight. Minimize installation time and installation cost.Specifications Material: low carbon steel, aluminum metal, stainless steel metal, nickel metal. Hole shape: diamond, hexagon, fan shaped holes. Surface treatment: PVC coated, galvanized, powder coated, anodize oxidation. LWM: 12.5 - 200mm. SWM: 5 - 80mm. Thickness: 0.5 - 8mm. Panel or roll width: 36 inches, 1 meter, 48 inches, 60 inches. Panel or roll length: from 72 inches to 150 feet. Note: other width or length also can be made.Application Expanded metal building facade mesh is strong and beautiful and full of many fashionable elements. so it is widely used in buildings, for example building exterior facade in working, shopping, or other public places. Besides, also can be used in working platforms, escalators, and walkways.
