Chain Electrical Hoist
Geared Monorail Travelling Trolley Travelling Troley Side View Front View Dimensions, Weight and Performance Data Push 500 Push/Geared Geared Geared Capacity kg 1000 3000 5000 10,000 Inside of wheel flanges mm Range 1 50-130 58-150 90-160 110-150 140-170 Range 2 140-200 150-210 160-220 160-210 180-210 Range 3 210-305 210-305 220-305 215-265 215-245 A Seat of susp, plate to runner tread Range 1 & 2 mm 75 89 110 84 137 Nominal 1.5 mm clearance to be allowed from edge of track flange to inside of wheel flange (3 mm overall on both side) Overall width of geared travel trolleys - J + (1/2 x track width) + G. On 500 to 2500 Kg. units when using the narrower track widths the cross bolt adjusting washers are to be assembled such that the end of the cross bolt is clear of the hand chain wheel. Weight of trolleys only exclude hand chain. Hand chain is 0.45Kg/m per linear length up to and including 2t capacity. Bottom of hand chain loop is 460 mm from ground level. Pusher bar fixing holes provided in all models. Anti-tip stop fitted to all hand geared versions. Buffers available as on option.
Specification Model HSH 3/4 HSH 1-1/2 HSH 3 HSH 6 Capacity ton 0.75 1.5 3 6 Lift m 1.5 1.5 1.5 1.5 Test load ton 1.125 2.25 4.5 7.5 Min. distance between hooks: mm 303 365 485 600 Pull on lever to lift full load kgf 20 21 33 35 No. of load chain falls mm 1 1 1 2 Diameter of load chain mm 6 7 10 10 Length of lever handle : D mm 290 410 410 410 Dimensions mm A 139 174 200 200 B 84 108 115 115 C 153 160 185 230 Net weight kg 7 11 20 30
Multipurpose, Portable, Universal, Gearless, Hand operated Pulling and Lifting machine, Supplied complete with telescopic, operating handle and standard Length of super flex steel fibre-mixed core wire-rope fitted with Hook or Shackle at one end and fused and tapered at the other end. Pulling & Lifting Machines Hy-Tack XL Series 2005 Technical Specifications HT-7 HT-13 HT-20 HT-35 HT-58 Dimensions (Approx.) 515 x 265 x 110 600 x 360 x 155 620 x 360 x 155 720 x 400 x 160 810 x 465 x 190 Capacity (SWL) (kgs) Lifting, Pulling 750, 1250 1600, 2600 2000, 3000 3200, 5200 5000, 8000 Length of Telescopic operating handle (Approx.) 54/72 cm 66/104 cm 70/130 cm 79/118 cm 120/145 cm Effort at full load (Approx.) kgs 40 50 50 60 70 Rope travel per Return stroke (Approx.) mm 40 55 50 36 30 Diameter of wire Rope (mm) 8.0 11.3 12.0 16.3 20.0 Standard Length with Each machine (meters) 10 20 20 10 10 breaking Load of wire rope (Approx.) 4.5 Tons 9.0 Tons 10.0 Tons 18.0 Tons 24.0 Tons Exclusive Features Casing: Made from CRC sheet (Galvanized) or Graded Aluminium for light weight a high factor of safety. Jaw: Made from Special Alloy Steel, Accurately Machined, so as to avoid slippage of wire rope. Jaw Limits: Are made from special steel & heat treated for greater strength. Hooks / D-shackles: Fitted with Alloy steel Forged Hooks or D-shackle to make it feasible to be able to fit it at any place. Wore Ropes: Super flex Steel Fiber -mixed are, manufactured as IS. 226. Accepted & Widely used by Railways Mines and Quarries Navigator Electricity Board’s Dockyards Road Transports Heavy Industries etc. Increase of Pulling and Lifting Power: Lifting - machine anchored above load
Capacity IN Tones Jaw Openng A Plate ADMIT C Body DIA B CAM DIA Ring Size d X D Weight Per Pair Kgs Pair Each 1 0.5 50 150 40 16 16 X 75 12 2 1 60 170 45 16 20 X 85 13.5 3 1.5 70 200 55 20 22 X 95 28.5 5 2.5 85 260 65 25 25 X 95 40 10 5 95 300 90 32 32 X 135 78 20 10 150 400 120 40 45 X 200 160
Double Ended Type Stretching Screws (ISS)
Dimensions, Weight and Performance Data Marzoli Peg High quality spare parts for Marzoli machines manufacture, importers and suppliers in India. We use the most advanced technology and graded raw materials to manufacture the Textile Machinery Marzoli Spare Parts like Marzoli Rings, Peg etc. We have been regularly supplying this "Marzoli Spare Parts" to many contractors and associated people in this Field across India. We would request to you to please send to us your enquiries for the same so that we can send to you more details and our commercial offer for the same.
Marzoli Rings Dimensions, Weight and Performance Data Machine Width With Doffer Max. 1420 mm Ring Diameter 36 - 54 mm Application Staple fibres up to 60 mm Tube Length 180 - 260 mm Spindle Gauge 70 - 75 mm Twist Range 4,0 - 80 Tpi (160 - 3150 Tpm) Material Cotton, man made fibres and blends Yarn Count 3,0 - 150 Ne (Nm 5,0 - 250). Ring Diameter 36 - 54 mm Tube Length 180 - 260 mm Spindle Gauge 70 - 75 mm Maximum yarn quality in all working conditions High drafts up to 80 fold. Optimum spindle speed at every phase of bobbin build up thanks to an inverter drive. Independent spindles, ring rail and drafting system drives. Extremely reliable and fast doffing system with no trailing ends. Simple and reliable transport peg system for either bobbins or tubes. Ring frame stops to prevent production of defective yarn. Flexible linking alternatives.
Choice of several systems available Choice of ratchet systems Endless or two part versions Choice of 25mm - 75mm wide polyester webbing Anti-abrasion protection available Anti cutting protection available Conforms to B.S. 5759: 1987 Ratchet Reference, Minimum Breaking Strength, Rated Assembly Strength, Web Width (mm), Two Part (kg), Endless (kg), Two Part (kg), Endless (kg), KRL-25, 1200, 2400, 600, 1200, 25, KRL-35, 3000, 6000, 1500, 3000, 35, KRL-50, 5000, 10000, 2500, 5000, 50, KRL-75, 8000, 16000, 4000, 8000, 75, Cambuckle Reference, Minimum Breaking Strength, Rated Assembly Strength, Web Width (mm), Two Part (kg), Endless (kg), Two Part (kg), Endless (kg), KCB-25, 250, 500, 125, 250, 25, KCB-35, 1000, 2000, 500, 1000, 35, KCB-50, 1500, 3000, 750, 1500, 35 Features Zebra manufactures two basic types of lashing systems, which are each available in either two part or endless configurations, with a wide variety of different end terminals. Cambuckle Compact and light in weight, Cambuckle lashings are ideal for securing light loads, the tension being applied by pulling the lashing hand tight. The Lashing release mechanism operates by depressing the thumb bar. No pre-tensioning of the webbing is possible. Cambuckle lashings are available in a range of Minimum Break Strengths from 250 to 1000 kg. Ratchet Systems For medium to heavy duty applications, Zebra offers a very wide variety of Ratchet Lashings Systems in Minimum Break Strengths ranging from 500 to 8000 kg. 25mm, 35mm, 50mm and 75mm webbing widths are available depending upon the loading requirements of the selected Lashing system.Within the range are many different types of Ratchet systems, all carefully designed and engineered to exert the right amount of pre-tensioning to the lashing. How to order Lashings Having first selected the appropriate Minimum Breaking Strength, the lashing format must next be considered. Here, there are two options: Two-Part or Endless, with the possibility to specify the fixed and overall lengths of a Two Part Lashing or the overall length of an Endless Lashing. FL= Fixed Length OL= Overall Length Two Part
Hand Operated, Double Purchase Crab Winch Note All welding are 5 mm fillet Section to conform IS-226 Cast Iron Milling Cut Gears Mild Steel side plates Hand Operated, Treble Purchase Crab Winch
Front View Side View Capacity (kgs) A B C D E F G H I J K L M 250 204 104 221 165 175 213 118 69 104 170 6.7 14 95 500 254 215 317 254 181 263 203 130 130 222 9.3 14 182 1000 254 215 317 254 181 263 203 130 130 222 12.7 17 182 1500 310 215 360 275 235 267 200 129 177 267 28.0 14 178 2000 349 241 381 304 250 300 300 184 206 305 12.7 17 210 3000 349 241 381 304 260 308 300 184 206 305 15.5 19 210 5000 400 315 480 570 400 500 335 225 250 460 20.0 33 315 Note Drum : Graded Cast Iron Worm : EN 8 or 9 heat treated Wretch : EN 8 or 9 heat treated Bearing : Thrust Side plate : Mild Steel Thickness of side plate : 8 mm
5 Ton Capacity Electric Winch. Motor CROMPTON/ GEC/ KIRLOSKER" Make Slipring Crane Duty Motor 960 RPM, 440 Volt, 3 phase, 1 Hr. rated 40% ED as per IS: 325 having 'B' Class insulation. Drum Made from Rolled steel as per IS:226 of adequate thickness with side flange. Drum running on Bearing to take adequate rope length. Shaft Forged from EN-8 steel machine fitted with Drum. Chassis: Fabricated from joist of adequate size as per IS: 226 to take all shocks. All the stands on the chassis are Boxed type. Reduction 1st Reduction: through Elecon/Radicon make worm reduction Gear Box totally enclosed running on oil. 2nd Reduction: through open machine cut Gear from carbon steel & pinion made of Alloy Steel duly heat treated. Break Electro Magnetic Hydraulic Thruster Brake of reputed make. Mechanical Bend Brake with screw system with Ferrodo Brake lineing. Extra safety Ratchet pawl arrangement on the side of the drum for not moving the drum in opposite direction for extra safety. Coupling We will provide flex. Brake Drum coupling on the out put of motor & Input of Gear Box. Flex. coupling pin type on the output shaft of the Gear Box & In put shaft of the pinion. Controls Drum controller of TAC Make 5/7 steps. Forward & Reverse mtio. Control panel in sheet in sheet metal Box for dust, heat & water resistance containing of : Isolator Overload Relay Contector Single phase preventor FuseHrc. Amp. Meter Voilt Meter (h) Neon Lamp Push Button for start & Stop Resistance Box 10 Minute rating. Wiring & Pairrting We will provide all wiring from weather proof ar mured copper cable of adequate size & the Winch will be painted by two coats of primer & Two coats of Grey paint. Operator seat We will provided operator seat by the side of controls. Note Speed of 5 Ton & 10 Ton winch is 8/1OMTS per minutes. General Description SKID Frame Type- Frame made out of heavy steel sections M.S. Drums M. S. Gear & Pinion. Teeth Cut on Gear Hobbing Machine for Perfect Pitch. Reduction through Gear Box and Bull Gear & Pinion. Hydraulic Thrustor Brake ElectroMagneticBrake Electro Magnetic Brake. Manual Brake Carbon Steel Shaft A Safety Ratchet System All controls within reach of operator. Variable Speed Motor. Load & Speed as per Requirement of the Customer. Detail required for submission by Customer Rope pull in Tons ( Capacity) Speed required Mtr./per Min. Rope size & Length required on Drum. Available Elec. Current supply. Description of Application. Other accessories required with.
Short Lift Screw Jack
Hydraulic Jack: Screwed Ram Type Jacks: SR (Capacity: 125-500 Tons) Type SR-EHD 2/150 SR-EHD 3/150 SR-EHD 5/150 SR-EHD 8/150 SR-EHD 10/150 SR-EHD 12/150 SR-EHD 15/150 Capacity in Tons 125 150 200 250 300 400 500 Closed Height 360 360 400 400 400 445 500 Hydraulic Lift 150 150 150 150 150 150 150 Extended height 510 510 550 550 550 595 650 Ram Diameter 300 335 360 385 425 525 625 Base Size L*B 380*350 420*380 450*400 500*440 520*475 675*550 820*675 Approx.Weight in kg. 132 183 255 346 407 649 892 Designs &specifications subject to alterations for the sake of improvement without notice. All dimensions are in approx. mm unless otherwise stated. Other Features Widest selection of standard capacities Reliability through proved and accepted highest standard of quality product performance All critical components made from selected alloy steel and electrically welded for greater strength anf safety. Each product goes through a series of check and test to conform to Bureau of Indian standards and International Standards. Cylinders-Seamless steal Honed Tubes to DIN 2391-C, Grade 525/E-355, Stress relieved annealed yield strength Rp 0,2 min. Tensile strength- Rm min. 600 N/mm2 . Surface finish- Ra 0.3 ohms . Fast and easy maintence. Spares and Service readily and easily available. Screwed Ram with Safety Lock Nut for Additional safety and Unlimited Duration Load Holding Advantages. Advantages Simple in operation. Effortless, time saving and safe. Suitable carrying handle provided with each jack.
Capacity 25-100 Tons Hydraulic Jacks: Screwed Ram Type Jacks: SR (Capacity: 2- 20 Tons) Special Features Reliable Solid Compact Light Weight Simple Design Versatile Performance Type SR 2/120 SR 3/150 SR 5/150 SR 8/150 SR 10/150 SR 12/150 SR 15/150 SR 20/150 Capacity in Tons 2 3 5 8 10 12 15 20 Closed Height 205 235 248 248 252 252 260 260 Hydraulic Lift 120 150 150 150 150 150 150 150 Extended height 325 385 398 398 402 402 410 410 Ram Diameter 30 30 36 43 46 52 58 65 Body Diameter 65 65 72 86 90 98 112 126 Base Size L*B 115*115 115*115 125*125 150*140 150*150 150*150 170*170 180*180 Approx.Weight in kg. 5 6 8 10 11 12 16.5 22 Designs &specifications subject to alterations for the sake of improvement without notice. All dimensions are in approx. mm unless otherwise stated. Other Features Widest selection of standard capacities Reliability through proved and accepted highest standard of quality product performance All critical components made from selected alloy steel and electrically welded for greater strength anf safety. Each product goes through a series of check and test to conform to Bureau of Indian standards and International Standards. Cylinders-Seamless steal Honed Tubes to DIN 2391-C, Grade 525/E-355, Stress relieved annealed yield strength Rp 0,2 min. Tensile strength- Rm min. 600 N/mm2 . Surface finish- Ra 0.3 ohms . Fast and easy maintence. Spares and Service readily and easily available. Screwed Ram with Safety Lock Nut for Additional safety and Unlimited Duration Load Holding Advantages. Advantages Simple in operation. Effortless, time saving and safe. Suitable carrying handle provided with each jack.
The colour combination as shown in the chart is a mere indicator, however the colour may change subject to availability of raw materials. Features Two types : Flat webbing & Endless sling Flat and wide load bearing surface Lifts smooth and fragile objects without risk of damage High strength to weight ratio Colour coded for identification even when soiled Wide variety of lifting modes Anti-abrasion webbing sheave (AAWS) protection available Anti-cutting Sobitex polyurethane sleeves to protect your webbing slings from extra sharp edges Conforms to B. S. 3481 Part 2 Zebra flat webbing slings are manufactured from high tenacity, 100% polyester yarn. Simplex slings is a single layered webbing. Sling ends are terminated either in reinforced loops or any combination of metal end fittings. Manufacturer’s test certificate is provided for safe work load along with the slings. Simplex slings are preferred because of their broad width which gives wider support to lifts. The slings are of three types, namely simplex sling with soft eyes, simplex sling with metal end fitting and endless sling. They normally lift loads with the sling revved around the load (Choke hitch), or on two parts of the sling (Basket Hitch). They are tested in straight pull.
Factor of safety for webbing 1:7 The colour combination as shown in the chart is a mere indicator, however the colour may change subject to availability of raw materials Features Soft, supple, and light in weight, easy to handle. Internationally identifiable colour code, SWL shown on slings and also shown by the way of woven stripes i.e. each black stripe for each ton. Being endless, wears evenly as there is no single point use. Ideally suited for lifting smooth, polished or coated objects. Conforms to B. S. 6668 Part 2 and Indian standards. Zebra Round Slings are light weight compared to the working load ratio and being Polyester do not rust or corrode as in metal slings. These slings have no danger of hand injury to workman caused by cut wires and does not spark, hence can be used explosive environment. The elongation factor on load is only 3%, hence it absorbs the load while lifting. Zebra Round Slings flattens and adjust to contours of the load point thus forming a firm grip.
Factor of safety for webbing 1:7 and for steel terminals 1:4 Features Zebra has set the industry standard for the lowering-in Belt with ten years of continuous improvement. The lowering-in belt system consist of two parts The steel head iron (hook iron, lifting iron or bail). The sling fabric. The sling fabric is woven from high tenacity polyester yarn. The steel belt end and the head irons are designed for ease of use, quick and easy coupling and uncoupling. The lowering-in belt sling system is designed for long and durable life and is conservatively rated with a safety factor of 5:1. These figures are given on the data sheet overleaf. A certificate to this effect for individual belts and head irons can be provided on request. Hooks are stamped with the safe working load. All sling fabrics have a tag or plate with the safe working load. Manufactured from duplex polyester webbing slings joined together to be used with heavy duty steel terminals. High load capacity for lowering pipes. High safety, low elasticity and resistant to ultra-violet rays. Simple on-site belt replacement in minutes with advanced terminal design. Economical in use due to long working life. Extra heavy duty lowering belt can be supplied on request.
Multi Leg Slings Polyster Slings Special Features Choice of two, three or four-leg versions. Webbing or Round slings depending on applications. Length of legs to order. Special Webbing/Chain combinations to order. Anti-abrasion protection available. Anti-cutting protection available. High strength to weight ratio. Color code for positive identification, even when soiled. Only hooks and link are metal components. Conform fully to B. S. 3481 Part 2 B. S. 6668 Part 2 and the European Standard Draft pr.EN 1492-1 and 1492-2. General Description Zebra Multi-Leg Slings are manufactured using either Round slings or Duplex Webbing Slings, depending upon the type and the Safe Working Load. Hooks, master links and auxiliary links are manufactured from quenched and tempered alloy steel. Duplex Slings are stitched directly onto the metal components, Round slings being attached via auxiliary links. All Round slings are fitted with protective slaving and anti-abrasion or anti-cutting protection can also be specified as required. Please note that further information on the general performance, specification, safety in use and maintenance of these products is covered in more detail in the sections on Round slings or Webbing Slings Safe Working Load Angles The Safe Working Load values quoted in the tables have been rated using the uniform load method for a maximum angle for each leg of 45 degrees from the vertical, as shown in the diagrams. Slings may be rated at greater angles if required, please consult Zebra for further details. The textile elements of these Slings have a minimum safety factor of 7:1 and the metal elements a safety factor of 4:1. All slings are serialized and issued with a test certificate.
Bind the rope from the end at a distance equal to the loop desired, plus an additional length of about 10 times the diameter of the rope .split the rope by separating three adjacent strands, leaving the other three strands and core intact. Bend the large section(three strands core ) into the desired size loop and start laying the three separated strands in to the grooves of the bent section,as close to the throat as possible. Completely lay the three strands around the loop as deep into the throat as possible. allowing the six strands ends and the core to project close to the throat of the loop. In application of pressed-on ferrule is rolled in eye splice. Noticed how smooth the fabric is joined. Position the special ferrule over the rolled in splice in preparation for swaging. Ends are still flats. By administration of tremendous force by swaging machine, ferrule is tapered. Wire Rope Press Grip Sling Are Economical Safer And Easier To Work With Three slings you can count on high strength efficiency on all eye splices.they are tapered and completely sealed with at both end to avoid snagging on loads. these ferrules completely cover all strands and locks them securely into place. there are no opening or rough projection to catch on hands. Rope slings with special pressed on metal ferrules are easier to work with. Slings are made from 6x19 wire rope and from 6x37 wire rope. We recommended use of 6x19 construction. Upto 1 ¼ :6x37or large slings. Note: Standred sleeves are recommended for use with 6x19 or 6x37,IPS or EIF RRL,FC or IWRC wire rope.
