Multi Leg Slings Polyster Slings Special Features Choice of two, three or four-leg versions. Webbing or Round slings depending on applications. Length of legs to order. Special Webbing/Chain combinations to order. Anti-abrasion protection available. Anti-cutting protection available. High strength to weight ratio. Color code for positive identification, even when soiled. Only hooks and link are metal components. Conform fully to B. S. 3481 Part 2 B. S. 6668 Part 2 and the European Standard Draft pr.EN 1492-1 and 1492-2. General Description Zebra Multi-Leg Slings are manufactured using either Round slings or Duplex Webbing Slings, depending upon the type and the Safe Working Load. Hooks, master links and auxiliary links are manufactured from quenched and tempered alloy steel. Duplex Slings are stitched directly onto the metal components, Round slings being attached via auxiliary links. All Round slings are fitted with protective slaving and anti-abrasion or anti-cutting protection can also be specified as required. Please note that further information on the general performance, specification, safety in use and maintenance of these products is covered in more detail in the sections on Round slings or Webbing Slings Safe Working Load Angles The Safe Working Load values quoted in the tables have been rated using the uniform load method for a maximum angle for each leg of 45 degrees from the vertical, as shown in the diagrams. Slings may be rated at greater angles if required, please consult Zebra for further details. The textile elements of these Slings have a minimum safety factor of 7:1 and the metal elements a safety factor of 4:1. All slings are serialized and issued with a test certificate.