Peripheral diamond wheel, cylindrical diamond wheel Vitrified Diamond/ CBN Grinding Wheel * Diamond wheel for pcd tool grinding. The diamond wheel can to grind R0.01mm pcd inserts. Peripheral diamond wheel, cylindrical diamond wheel CBN internal grinding wheel for universal joint grinding. CBN wheel for camshaft & crankshaft grinding Electroplated Diamond Grinding Wheel, CBN Sharpening Wheel * 6" 8" cbn grinding wheel for woodturning tools grinding. Electroplated diamond cup wheel, electroplated diamond lapping disc Diamond mounted points, diamond burs , diamond rotary wheel for polishing marble, stone, carbide, glass Dicing blade for cutting silicon wafer, copper wafer Metal Bond Diamond Wheel, Diamond Cutting Disc Metal diamond wheel, diamond cup wheel are used for grinding glass, optical glass, pcd tools and tungsten carbide, etc Vacuum Brazed Diamond Tools Vacuum brazed diamond wheel, diamond grinding disc are used for cast iron and metal working in foundry. If you need any products, do not hesitate to contact Skype:Annawng www.moresuperhard.com WhatsApp:+8615617785923 Anna.wang@moresuperhard.com
Valve Seat: The detachable surface parts in valve are used to support the valve spool in the fully closed position and constitute a sealed part. Generally, valve seat diameter is the maximum flow diameter of the valve. PRODUCT PARAMETERS Brief Introduction The definition of thermal spraying technology in the national standard GB/T18719-2002 "Thermal spraying terminology, classification": The thermal spraying technology uses a heat source to heat the spray material to a dissolved or semi-dissolved state, and spray deposited at a certain speed to after pretreatment of substrate surface coating method. Thermal spraying technology is to create a special working surface on the surface of ordinary materials, it can achieve: a variety of functions such as anti-corrosion, wear-resisting, anti-friction, high temperature resistance, oxidation resistance, heat insulation, insulation, electrical conduction, anti-microwave radiation, etc, through this technology, the goal of saving materials and saving energy is achieved,this tungsten carbide valve seats. We call this special work surface a coating, and the working method for making this coating is called thermal spraying. Thermal spray technology is one of the important components of surface process technology, which accounts for about one-third of surface engineering technology.
pcd tools for granite PCD Stone Engraving Tool (Granite, Marble) Engraving tool uses PCD blanks manufactured by world famous companies. The body part uses high quality tungsten carbide. Features 1. The center sharp knife of the PCD stone engraving cutter features long service life and good adaptability. It is particularly suitable to engrave granite and ceramic. Its maximum engraving depth can reach 1mm. 2. The flat bottom knife is used to engrave characters with smooth edges. The size of the engraving characters ranges from 3cm to 8cm. The knife features fast engraving speed and long service life. Its maximum engraving depth can reach 4mm. 3. The milling bedplate cutter can mill the groove at the bottom of the engraving picture. The milling cutter features fast processing speed and high work efficiency. You can choose milling bedplate cutters of different sizes according to the size of the processing surface. The recommended engraving depth of the milling cutter is 2mm. Application The PCD stone engraving cutter is used to engrave pictures or characters on granite, marble and ceramic. If you need any products, do not hesitate to contact
Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy. According to different drilling application, we have different design to meet customers with good quality and good price. No matter what kinds of rock-soft rock, loose-medium rock, hard rock and any other special formations, just tell us what you need and leave others at our disposal, we will handle the following, and our special tailored service is waiting for you upon your demand. R32-45mm, r32-51, r32-64, r32-76, T38-64mm, t38-76mm, t38-89, t38-102mm, T45-76mm, t45-89mm, t45-102mm, T51-89mm, t51-102mm, t51-127 etc. (3)package: in wooden case or in carton or as client's requirement. (4)productivity: 10000pcs/ month Package: in wooden case or in carton or as client's
Taper button bit is used for hard or very hard rock formation. Excellent quality and durability and specialized heat treat & stress reliefï¿¡?also maximum performance and hole cleaning ability. Our button bits made with high quality of raw material through special heat treatment, especially, tungsten carbide tips are import from south africa, widely applied in hand held (short-hole) drilling system for dimensional stone quarrying. Now, we are exporting the huge qty 32mm, 34mm, 40mm for indian quarry and spain, finland quarry, 7??, 11??38mm, 41mm is very popular for granite and marble etc quarries.. Diameter of bits from 30mm to 42mm with 4, 6, 7, 11, 12 degree, number of buttons is 4, 5, 6, 7, 8 , 9, 7 buttons is very popular for hand held (short holes ) and blast drilling system. Ton designs. Package: in wooden case or in carton.
Taper button bit is used for hard or very hard rock formation. Excellent quality and durability and specialized heat treat & stress reliefï¿¡?also maximum performance and hole cleaning ability. Our button bits made with high quality of raw material through special heat treatment, especially, tungsten carbide tips are import from south africa, widely applied in hand held (short-hole) drilling system for dimensional stone quarrying. Now, we are exporting the huge qty 32mm, 34mm, 40mm for indian quarry and spain, finland quarry, 7??, 11??38mm, 41mm is very popular for granite and marble etc quarries.. Diameter of bits from 30mm to 42mm with 4, 6, 7, 11, 12 degree, number of buttons is 4, 5, 6, 7, 8 , 9, 7 buttons is very popular for hand held (short holes ) and blast drilling system. Ton designs. Package: in wooden case or in carton. -
Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy. According to different drilling application, we have different design to meet customers with good quality and good price. No matter what kinds of rock-soft rock, loose-medium rock, hard rock and any other special formations, just tell us what you need and leave others at our disposal, we will handle the following, and our special tailored service is waiting for you upon your demand. R32-45mm, r32-51, r32-64, r32-76, T38-64mm, t38-76mm, t38-89, t38-102mm, T45-76mm, t45-89mm, t45-102mm, T51-89mm, t51-102mm, t51-127 etc. (3)package: in wooden case or in carton or as client's requirement. (4)productivity: 10000pcs/ month Package: in wooden case or in carton or as client's
Pruducts name: Iso turning inserts, cnmg-pf Group of product: Iso turning inserts and holders , iso turning inserts Coating: C2015, c2115 Hardness: Hrc65 Usage: Suitabele for finishing iso p material Material: Tungsten carbide Typ: Cnmg-pf Brand name: Haffman Place of origin: China Product name: Iso turning inserts, cnmg-pf Insert shape: 80â° Clearance angel: 0â°, negative Inserts dimension: 090304, 090308, 120404, 120408, 120412 Materials of workpiece: Iso p materials, steel Cutting process: Finishing Using face: Double face Chip breaker: Pf Stock: On stock Package: Plastic box Transport: Ups, tnt, fedex, Fob reference price: Us $3-8 / pieces | 10 piece/pieces (min. Order) Delivery time: 1- 30 days, on stock Port: Fob shanghai Supply ability: 100, 000 pcs pro month
* Adopts individual AC servo motor to control to automatically arrange order, the arranging order time is quick and precise, the time is 3-8 seconds.. * Adopt high precise linear guard rail to guide with gear and rack to drive with high precision, The slitter and scorer precision is �±0.5mm. * Adopts thin tungsten steel blade design, the paper after cutting is no collapse, no burr with good appearance and straightness. * With blade auto-cooling and lubricating�it can sharp the knife milled manual or auto, slitting and sharping knife can be at the same time to improve working efficiency. * Press line wheel three types: convex to concave, convex to convex, convex to flat three types, adopt electrically to change, pressing line gap automatic adjustment, with good line shape, it is not easy breaking paper and easy to bend. * The whole machine electric correcting the error to cooperate with the paper excursion effectively. * Slitter and scorer adopt individual motor drive, automatically track the speed of the production line. * With two machine cooperating to realize changing order time 0 second . * Max. speed:200m/min Valid working width1400mm-2200mm
* Adopts individual AC servo motor to control to automatically arrange order, the arranging order time is quick and precise, the time is 3-8 seconds.. * Adopt high precise linear guard rail to guide with gear and rack to drive with high precision, The slitter and scorer precision is �±0.5mm. * Adopts thin tungsten steel blade design, the paper after cutting is no collapse, no burr with good appearance and straightness. * With blade auto-cooling and lubricating�it can sharp the knife milled manual or auto, slitting and sharping knife can be at the same time to improve working efficiency. * Press line wheel three types: convex to concave, convex to convex, convex to flat three types, adopt electrically to change, pressing line gap automatic adjustment, with good line shape, it is not easy breaking paper and easy to bend. * The whole machine electric correcting the error to cooperate with the paper excursion effectively. * Slitter and scorer adopt individual motor drive, automatically track the speed of the production line. * With two machine cooperating to realize changing order time 0 second . * Max. speed:200m/min Valid working width1400mm-2200mm
Name: PCBN Cutting Tool Blanks Application: Ferrous Metal And Alloy Details Introduction�We Has Various Equipments Such As Laser Cutting Machines, Wire Cutting Machines And Various Processing Equipments To Cut Blanks, Regardless Of Their Thickness Into Special Sizes And Shapes Per Customers Requirements. BN Characteristics: Solid CBN, Good Wear Resistance, Two Sides Can Be Used As Edges, High Thermal Resistance, Excellent Fracture Resistance BN Application: High Speed Turning And Milling Of Gray Cast Iron, Turning Of Chilled Iron,Nickel-Based Iron And Ductile Iron PCBN Characteristics: *Good Weld Based In The Composite CBN Layer And Tungsten Carbide Base;High Abrasion Resistance *Good Transversal Repture Strength Resistance; Good Chemic Stability;Uniform Dimension Precision; *Good Consistency Of Processing. PCBN Application: Turning Of Castiron; Powdered Metals; Exotic Materials And Heat Resistant Alloys; High Speed Milling Of Gray Castiron. Please don't hesitate to contact me if you have any needs:miya AT moresuperhard.com Our company also produces a series of diamond and CBN tools, welcome to consult and choose at any time
Description of Log washer Log washer is used to wash ores with mud before the employment of mineral processing technology as well as increase ore dressing indexes of back-end technology. They are often used to wash cores such as manganese ore, iron ore, limestone, tungsten ore, tin ore and silica sand ore. According to silt content, grain size and washing difficulty level of cores, double-screw washer, troughed ore washer or cylindrical ore washer can be selected. RXT log washer is apply to desliming of sand and gravel. Single-deck or double-deck round screen is installed inside the drum of the washer which can get two or three types of sand and gravel production of different specifications. Log Washer >> Log Washer is ideal for scrubbing difficult materials such as tough insoluble clays, conglomerates, soft stone and cemented aggregate >> Oversize bearings and gears >> Thick-walled shafts >> Lower end bolted to fully machined stub shaft. Upper end mounted through flexible coupling to output shaft of gearbox >> The compound drive divides the operating load over an optimal combination of oversized helical and spur gears >> Continuous grinding and abrading log washer paddles
Steel Woven Wire Cloth 201 304 304L 316 316L StainlessSteelWovenWireMesh Screen StainlessSteelWireMesh/Filter Screen Micron stainlesssteelwiremesh Oil industry stainlesssteelfilterwiremesh stainlesssteelwiremesh/stainlesssteelwovenwirecloth /meshscreen dutch weave/ stainlesssteelwiremesh/ filtermeshscreen plain dutch weave/twill weave stainlesssteelwiremesh stainlesssteelwiremeshfor paper machine cylinder Plain & Twill Weave Wire Cloth Plain & Twill Dutch Weave Wire Cloth Reverse Dutch Weave & Twill Weave Wire Cloth 1.Materail: Stainless steel wire mesh 304/304L/316/316L copper ,brass ,phosphor-bronze ,and special alloys ,nickel wire mesh ,titanium wire mesh ,monel wire mesh ,molybdenum wire mesh ,tungsten wire mesh ,zirconium wire mesh ,tantalum wire mesh ,inconel wire mesh ,nichrome wire mesh . 2.Weave type: Plain weave, Twilled weave, Dutch weave Twilled Dutch etc. 3.Features:Excellent Resistance Against Acid, Alkali, Heat and Corrosion Wear-resisting 4.Uses:Mainly used for filtering and sieving, extensively used in petroleum, chemical industry, enviroment protection, mine, airspace, paper-making, electronic, metallurgy etc. 5.Packing details: 1. paper packing or plastic packing 2. carton packing 3. wooden packing or acrroding to customer requirements.
Introduction Sand and gravel washers are also called ore washer which are used to wash ores with mud before the employment of mineral processing technology as well as increase ore dressing indexes of back-end technology. They are often used to wash ores such as manganese ore, iron ore, limestone, tungsten ore, tin ore and silica sand ore. According to silt content, grain size and washing difficulty level of cores, double-screw washer, troughed ore washer or cylindrical ore washer can be selected. Sand and gravel washers are also used to wash sand and gravel in construction sites, power stations, etc. RXT sand and gravel washers introduce foreign technology and apply to desliming of sand and gravel. Single-deck or double-deck round screen is installed inside the drum of the washer which can get two or three types of sand and gravel production of different specifications. Models 2RXL320 2RXL400 2RXL540 2RXL750 2RXL800 2RXL914
Thin knife slitting creasing carton machine Packaging consumables/expendable supplies Product Description Structure: 3 knife 4 lines, 4 knife 6 lines, 5 knife 8 lines or as your requires. Adopt tungsten steel blade, sharp and long work-life, slice more tidy Incision is smooth, Corrugated straight A. Carton Machine structure: a) This machine has automatic sharpening system. Each blade has independent control of the sharpening switch. In order to extend the blade life effectively, you can according to the production quantity adjust the sharpening interval time. b) Electromagnetic adjustable-speed motor. After the deceleration of a belt, chain drive to the host work. The operation is reliable and stable. c) This machine blade adopt tungsten steel material. It has high quality and long life, slitting paper can be up to 200-400 millimeters. d) The feeding part has pre-pressed wheel design. Creasing part is 3mm width design. That can ensure the paper board without crack and the poly-lines as a straight angle when the creasing. e) The slitting blade has culet and rolling bearing design, and adjust very flexible and convenient. Find here details of RiNO selling Packaging Consumables, Manual Die-cutting Machine, Waste Paper Stripper Machine, Carton Stitching Wire, Double Sides Adhesive Tape, Strapping Machine. All the Packaging Consumables with super quality and competitive price. Our company is a leader in the industry of Packaging Consumables and we will not disappoint you. B.Carton Machine features: a) This series machine can slitting corrugated cardboard, plastic, hollow board, grey cardboard. b) Slitting the corrugated board edge is smooth, beautiful, no cracking. c)This machine has step-less speed regulation system, different skilled workers can be operating. d) This machine gearbox has opened the door design, to convenient inspection and maintenance, repair. e)Feed part and pressure line part of the lower shaft using roller design, ensure cardboard after pressure line of paper without creasing, convenient printing. f) All of the drive shaft surface has hard chrome plating, to ensure durable.
Name: electroplated diamond & CBN grinding wheel for non-ferrous industry application No dressing,Body can be re-plated several times Introduction:Electroplated diamond and Cubic Boron Nitride (CBN) tools are made up of a basic single layer or multi-layers (depending on application) of either diamond or CBN particles that are bonded to the tool surface using a nickel matrix. The product can be made with various shapes and they are suitable for special complicated profile, surface grinding ,Internal grinding, Slot grinding,Profile grinding and small and others form grinding. Electroplated diamond and CBN tools are used for surface grinding ,Internal grinding, Slot grinding,Profile grinding Ceramics, Glass, Tungsten Carbide, Ferrite ,Chilled Cast Iron, Founded Alloy Steel, Titanium Alloy And etc Applications of electroplated bond grinding wheels: diamond tools for non - ferrous industry application * carbide (grinding green and sintered tungsten carbide) * ceramic (grinding ceramics like SIC, AJO,ZrO, etc) * automotive (grinding brake liners and cutting re-enforced rubber mouldings) * pharmaceutical (grinding factitious knee joint) * dental (profiling rubber bonded grinding pins) * ferrite (grinding magnetic parts) * chemical (grinding laboratory glass) * graphite (grinding graphite parts) * glass (grinding tubes, automotive components) * Fiberglass ,Plastics and Electronic components, etc CBN tools for metallic materials industry application * High-speed tool steels * Die steel * Hardened carbon steels * Hardened stainless steels * Alloy steels,Titanium Alloy * Aerospace alloys * Abrasion resistant ferrous materials, etc Advantages of electroplated diamond & CBN wheels: 1.No dressing procedure necessary,Body can be re-plated several times 2.High geometric and proportion precision,Complicated forming 3.retain their original shape and dimensions throughout their working life 4.Simple electroplated process, less investment convenient manufacturing 5.Excellent surface roughness, high grinding efficiency , long tool life 6.free-faster cutting, no dressing, less heating due to the diamond particles protruding from the surface. Please provide us details when you order, For example, Product needed: Resin bond diamond grinding wheel 1) Diameter (25, 40,100,200,300,750mm) 2) Hole/state bore dimension 3) Thickness (4/5/6/8/10/,40/50/60mm) 4) Shape (1A1 /1A1R/1A8/1A1W/1L1/1F1/6A2/12A2/11V9/4A1/14A1,) 5) Grit size (16/18, 18/20,40/45,80/100,325/400. In GB or ISO standard) 6) Other request
Name: electroplated diamond & CBN grinding wheel for non-ferrous industry application No dressing,Body can be re-plated several times Introduction:Electroplated diamond and Cubic Boron Nitride (CBN) tools are made up of a basic single layer or multi-layers (depending on application) of either diamond or CBN particles that are bonded to the tool surface using a nickel matrix. The product can be made with various shapes and they are suitable for special complicated profile, surface grinding ,Internal grinding, Slot grinding,Profile grinding and small and others form grinding. Electroplated diamond and CBN tools are used for surface grinding ,Internal grinding, Slot grinding,Profile grinding Ceramics, Glass, Tungsten Carbide, Ferrite ,Chilled Cast Iron, Founded Alloy Steel, Titanium Alloy And etc Applications of electroplated bond grinding wheels: diamond tools for non - ferrous industry application * carbide (grinding green and sintered tungsten carbide) * ceramic (grinding ceramics like SIC, AJO,ZrO, etc) * automotive (grinding brake liners and cutting re-enforced rubber mouldings) * pharmaceutical (grinding factitious knee joint) * dental (profiling rubber bonded grinding pins) * ferrite (grinding magnetic parts) * chemical (grinding laboratory glass) * graphite (grinding graphite parts) * glass (grinding tubes, automotive components) * Fiberglass ,Plastics and Electronic components, etc CBN tools for metallic materials industry application * High-speed tool steels * Die steel * Hardened carbon steels * Hardened stainless steels * Alloy steels,Titanium Alloy * Aerospace alloys * Abrasion resistant ferrous materials, etc Advantages of electroplated diamond & CBN wheels: 1.No dressing procedure necessary,Body can be re-plated several times 2.High geometric and proportion precision,Complicated forming 3.retain their original shape and dimensions throughout their working life 4.Simple electroplated process, less investment convenient manufacturing 5.Excellent surface roughness, high grinding efficiency , long tool life 6.free-faster cutting, no dressing, less heating due to the diamond particles protruding from the surface. Please provide us details when you order, For example, Product needed: Resin bond diamond grinding wheel 1) Diameter (25, 40,100,200,300,750mm) 2) Hole/state bore dimension 3) Thickness (4/5/6/8/10/,40/50/60mm) 4) Shape (1A1 /1A1R/1A8/1A1W/1L1/1F1/6A2/12A2/11V9/4A1/14A1,) 5) Grit size (16/18, 18/20,40/45,80/100,325/400. In GB or ISO standard) 6) Other request
Name: electroplated diamond & CBN grinding wheel No dressing,Body can be re-plated several times Introduction:Electroplated diamond and Cubic Boron Nitride (CBN) tools are made up of a basic single layer or multi-layers (depending on application) of either diamond or CBN particles that are bonded to the tool surface using a nickel matrix. The product can be made with various shapes and they are suitable for special complicated profile, surface grinding ,Internal grinding, Slot grinding,Profile grinding and small and others form grinding.Electroplated diamond and CBN tools are used for surface grinding ,Internal grinding, Slot grinding,Profile grinding Ceramics, Glass, Tungsten Carbide, Ferrite ,Chilled Cast Iron, Founded Alloy Steel, Titanium Alloy And etc Applications of electroplated bond grinding wheels: diamond tools for non - ferrous industry application * carbide (grinding green and sintered tungsten carbide) * ceramic (grinding ceramics like SIC, AJO,ZrO, etc) * automotive (grinding brake liners and cutting re-enforced rubber mouldings) * pharmaceutical (grinding factitious knee joint) * dental (profiling rubber bonded grinding pins) * ferrite (grinding magnetic parts) * chemical (grinding laboratory glass) * graphite (grinding graphite parts) * glass (grinding tubes, automotive components) * Fiberglass ,Plastics and Electronic components, etc CBN tools for metallic materials industry application * High-speed tool steels * Die steel * Hardened carbon steels * Hardened stainless steels * Alloy steels,Titanium Alloy * Aerospace alloys * Abrasion resistant ferrous materials, etc Advantages of electroplated diamond & CBN wheels: No dressing procedure necessary,Body can be re-plated several times High geometric and proportion precision,Complicated forming retain their original shape and dimensions throughout their working life Simple electroplated process, less investment convenient manufacturing Excellent surface roughness, high grinding efficiency , long tool life free-faster cutting, no dressing, less heating due to the diamond particles protruding from the surface. Please provide us details when you order, For example, Product needed: Resin bond diamond grinding wheel 1) Diameter (25, 40,100,200,300 ,750mm) 2) Hole/state bore dimension 3) Thickness (4/5/6/8/10/ ,40/50/60mm) 4) Shape (1A1 /1A1R/1A8/1A1W/1L1/1F1/6A2/12A2/11V9/4A1/14A1 ,) 5) Grit size (16/18, 18/20 ,40/45,80/100 ,325/400. In GB or ISO standard) 6) Other request
Comparing with conventional tubing pump, sucker rod pump has better performance in corrosion resistance & anti-friction aspect. Plunger of it is nickel plated on alloy base, inside wall of barrel is plated with hard cadmium, key parts, such as valve hood, valve ball, are made of materials with excellent mechanical performance and corrosion resistant property. Compared with conventional pump, the series of pump has a longer working life. The pump adopts two pumps in series with different diameters to form a double-pump and single-action pump. During the operation, the upper and lower pumps suck and drain liquid simultaneously. The tail pipe is connected under the pump and a packer is installed between the tail pipe and the casing to separate the upper and lower oil level to realize separate layer production, which avoids the inference of layer difference and improves the pumping efficiency. Product Description: API-RHAM, Rod, Stationary Heavy Wall Barrel, Mechanical Top Anchor Pump API-RHAC, Rod, Stationary Heavy Wall Barrel, Cup Top Anchor Pump API-RHBM, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor Pump API-RHBC, Rod, Stationary Heavy Wall Barrel, Cup Bottom Anchor Pump API-RWAM, Rod, Stationary Thin Wall Barrel, Mechanical Top Anchor Pump API-RWAC, Rod, Stationary Thin Wall Barrel, Cup Top Anchor Pump API-RWBM, Rod, Stationary Thin Wall Barrel, Mechanical Bottom Anchor Pump API-RWBC, Rod, Stationary Thin Wall Barrel, Cup Bottom Anchor Pump API-RHBM-AC, Rod, Stationary Heavy Wall Barrel, Mechanical Bottom Anchor And Cup Top Anchor Pump Sucker rod pump is equipped with a seating nipple(there are two seating nipples in API-RHBM-AC) , seating nipple connection is on the tubing string, down to the bottom of the well with the tubing string. Plunger assembly connection is on the sucker rod string and with the pump overall down to seating nipple position together , pump with fixed inside the seating nipple.Plunger assembly with the sucker rod string up and down reciprocating movement to achieve pumping work. If the pump meet quality problem, it needn't to put forward the tubing string, only need to put the whole pump forward well through the sucker rod string together , operation is simple. Main parts process and material: Pump barrel: plain carbon steel plating (A1), ordinary carbon steel carbonitriding (B1), ordinary carbon steel carburizing (B2), low alloy steel nitride (B5). Plunger: 1045 steel spraying (B1), 1045 steel spraying (B2), 1045 steel chrome plating (A1), 1045 steel double chrome plating (A2). Valve ball and seat: stainless steel (A1), cobalt chromium (B2), tungsten carbide (C1), nickel and carbon compounds (C2), titanium carbide (C3). Other accessories: plain carbon steel, low alloy steel, stainless steel, brass and other materials.
Product description High performance cnc solid carbide cutting tools 1. Carbide square end mill, ball end mill, aluminium end mill Rough end mill, special tools 2 tiain coating, tin coating and diamond coating with high quality 3. Micro grain for hrc45-hrc65 4- fast delivery and good price Speciafications Chemical composition: 8%-10%co-wc Physical and machinal properties: density: 14.40-14.65g/cm3 hardness: 91-93 hra flexural strength: 3200-4000n/mm2 Organizational structure: wc mean grain size: 0.5-0.6um Corresponds to international standards: k20-k30, k20-k40 Suitable for: machining of cast iron, nonferrous alloy, nonferrous metals, fireproof alloy, titanium alloy, alloy steel, carbon steel and other non-metallic. It has suitable for finishing processing the grooves and side. Meanwhile, it can be processing in high speed and high efficiency which the material hrc>60 The helix angle of the aluminum endmill is divided into 45 degree helix angle and 55 degree helix angle. The 45 degree helix angle is usually called double ligament. The 55 degree helix angle is usually called ligament. Double ligament aluminum end mill more commonly used, more rigid, single ligament aluminum end mill is more sharp, less rigid and double-edged with aluminum end mill nose end mill with r0.5 and r1, generally no special indication on the default is r0.5, r0.5 round nose mill is also more commonly used flat end mill has two edges and four blades, four blade more commonly used, generally no special instructions, the default for the four blade flat end mill aluminum end mill is also divided into three blades and two blade, no special instructions, but also the default is the three-edged. Two-edged aluminum blade is smoother. Tungsten steel coating 4 Flute ball nose mill(Standard length type, Extended Type) D D L1 L 4 R0.5/R1 4 10 50 4 R0.5/R1 4 12 75 Extended type 4 R0.5/R1 4 16 100 Extended type 5 R0.5/R1 6 13 50 6 R0.5/R1 6 15 50 6 R0.5/R1 6 18 75 Extended type 6 R0.5/R1 6 20 100 Extended type 8 R0.5/R1 8 20 60 8 R0.5/R1 8 24 75 Extended type 8 R0.5/R1 8 25 100 Extended type 10 R0.5/R1 10 25 75 10 R0.5/R1 10 30 100Extended type 12 R0.5/R1 12 30 75 12 R0.5/R1 12 35 100Extended type 14 R0.5/R1 14 35 80 14 R0.5/R1 14 40 100Extended type 16 R0.5/R1 16 40 100 18 R0.5/R1 18 40 100 20 R0.5/R1 20 45 100
