Slitter Scorer

A. The orders changed of size fastest in approximately 3-7 seconds to get pre-setting position. And provide 99 memories pre-setting for order change at any time also accommodatingly in the production management system.

B. The machine has installed precision liner slides and ball screw bearing with encoder to get accurate position. The precision allowance within 0.5 mm to adapt of accuracy requirement various processing factories.

C. The upper scoring wheels is single convex type. It can be replaced destruction wheels to used. The upper and lower scoring wheel has equipped 3 types: convex to convex, convex to concave and convex to flat . Selected by switch button. Operate easily.

D. Front scoring units affirmed to rear scoring units, the scoring distance of board to achieve the random size.

E. The round razor type slitting knives. It can slit cardboard orderly and pretty. The minimum slitting edge is 3~5mm.

F. Automatically grind and lubricate without removing slitting knives and extended the life of knives.

G. Lubricant device is fixed by level feeding system which volume control very accurately and no waste even no any pollution to the board and environment

Price, delivery time, moq are negotiable, please contact us for quotation.

MJBD-2 Thin Blade

(Paperboard Slitter and Scorer)

Introduction

The Thin Blade (Paperboard slitting and pressing line machines) produced by our company is good appearance, good structure, with good design, easy to operation, easy to maintenance, and with competitive price.

The paperboard slitting and pressing machine use thin blade to cutting, the edge of the knives are very sharp, this makes the paperboard after cutting are very good edge, this improves the appearance and quality of the paperboard. Make the paperboard easier for entering printer machine, and improves the quality of the carton. The design of this machine use pressing and pulling paperboard with double wheels, can change wheels base. This means the machines can press and slitting, also can pull paper in front and back, can slitting stably. This is perfect machines for manufacturers of cartons.

Technological Parameters

Model
MJBD-2-1800
MJBD-2-2000
MJBD-2-2200
MJBD-2-2400

Max paperboard size (mm)
1700
1900
2100
2300

Max mechanical speed
100pcs/min
100pcs/min
100pcs/min
100pcs/min

Blade knives
4 knives
4 knives
4 knives
4 knives

Presslines
6 pairs
6 pairs
6 pairs
6 pairs

Min slitting width (mm)
130
130
130
130

Min pressing width (mm)
30
30
30
30

Outer diameter of the thin blade
220mm or 200mm
220mm or 200mm
220mm or 200mm
220mm or 200mm

Thickness of the thin blade
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)

Power
4.0KW
4.0KW
4.0KW
4.0KW

Pneumatic pressure
<0.4mpa
<0.4mpa
<0.4mpa
<0.4mpa

Machine size (mm)
2400¡Á1600¡Á1500
2600¡Á1600¡Á1500
3000¡Á1600¡Á1500
3200¡Á1600¡Á1500

Machine Weight (kg)
1250
1550
1950
2500






Note: For both of above types Thin Blade, you can choose the quantity of knives and press lines. For the sizes, we can make as customer¡¯s requirement.

Introduction:

YK-1600SFL Single Facer Line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.



Specification:

Working Width
YK-1400SFL

1400mm

YK-1600SFL

1600mm

YK-1800SFL

1800mm


Heating method Electrical heating/Oil heating / Steam heating
Design speed 100-120m/min
Economical speed 80-100 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
single facer line Standard spec. A,B,C,E,F

For other type and model, we can produce as customerâ??s requirement.
hydraulic shaftless mill roll stand

structural feature

Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive.

Brake adjustable adopts multipoint braking system.

Every stand matched two sets paper car , and they can paper on the both sides at the same time.

Technical parameters

1 the range of clamping paper MAX1600mm MIN1000mm 2 clamping diameters MAX1500mm MIN 350mm

3 main shaft diameter of paper holder 242mm
4 gas source work pressure Mpa 0.4---0.8Mpa

MJRY-2 Creasing and Die-cutting Machine (With Inverter For adjust the speed)

It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc. This Series Creasing and Die-cutting machine use Inverter to adjust the speed.

MJT model 3-Layer Corrugated Paperboard production Line
Introduction
Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line.

Equipments List

Equipments Name
MJT-60-1600

Economical
MJT-80-1600

Standard
MJT-100-1600

High-speed

Mechanical Roll Stand (include the paper roll rail.)
2
2


Hydraulic Roll Stand (include the paper roll rail.)


3

Pre-heater (diameter 400mm)(Up)
1
2


Pre-heater (diameter 600mm)(Ground)


2

Vacuum Single Facer (Roll 280), gimbal drive
1
1


Vacuum Single Facer (Roll 320), gimbal drive


1

Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.)
1
1


Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.)


1

Double preheater (diameter 400mm)
1
1


Double preheater (diameter 600mm)


1

Double Gluer - A
1
1


Double Gluer - B


1

Double baker (600mm X9heat plates, 4.5meter cooling part.)
1



Double baker (600mm X11heat plates, 5meter cooling part.)

1


Double baker (600mm X14heat plates, 6meter cooling part.)


1

Thin Blade (Simple electrical adjust.)
1



High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.)

1
1

Mechanical Cutter
1



NC Cutter (Servo, straight knife.)

1
1

Conveyor and Stacker

1


Paperboard booking machine


1

Glue system
1
1
1

Steam system (not include the boiler and pipes.)
1
1
1

MJDX-2 Stitcher (Stapler)

Introduction:
MJDX-2 Stitcher (Stapler), the head of the machine is made with electromagnetic clutch and electromagnetic arrester. The machine has advantages as working reaction speed is high, low noise and so on. The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly.

Sizes available: 600mm, 900mm, 1200mm, 1400mm, 1600mm, 1800mm.

Technological parameters:
Main technological Parameters:

Model
MJDX-2

Speed
400 stitcher/min.

Working thickness
3-ply, 5-ply paperboard

Stitch type
45¡ã double lean-nail

Width of stitch feet
13mm

Size of stitch wire
17#

Operation table height
1.2m

Motor power
0.55KW

Machine Weight
650kg