Seed counters are extensively used for seed counting in numerous botanical and agricultural laboratories. Features: Accurate counting of seeds. Light weigh. Requires no maintenance. Batching, repeat and multiple batches creating facility. Accurately counts a predetermined number of seed in a single batch count and allows for the continual duplication of a single batch count. Specifications: Display: seven segment fnd display. Seed size: 0.5 mm to 15 mm. No. Of seed: up to 9999 seeds in one batch. Computerized seed counter Specifications: Display: 2x16 column alphanumeric lcd display Seed size: 0.5 mm to 15 mm. No. Of seeds: in one batch: up to 999999 seeds Features: Facility to interface with printer / computer. 15 memory for storing different seed counts. Menu driven with facility for selecting of various seeds. Simultaneous display of preset count and actual count. Multiple batches and totalizing facility available. Auto/manual mode selection available in case of multiple batches. Buzzer indication after every count.
This instrument is used to test the oxidation stability of gasoline and can be used for determination of oxidation stability of petroleum under accelerated oxidation, to evaluate the possibility of colloid generation during oxidation of petroleum products. Our liop-177 gasoline oxidation stability tester comprises with following components: 1. Liquid bath:- square in shape. Inner chamber made of stainless steel and outer made of mild steel duly powder coated. The gap between is thermally insulated. Bath liquid stirring by motorized stirrer. Bath temperature control by microprocessor based controller. There will be provision of placing two number bomb in bath. Fitted with a over heating cutout system and supplied with two number s.S cover to cover the hole of the bath when not in use. 2. Oxidation bomb:- made of stainless steel and highly polished.& glass container. (1 no) 3. Pressure gauge (1no) 4. Quick coupling with oxygen filling device. Features:- 1, the oxidation stability of gasoline tester is compact, easy to operate and comfortable. 2, it can simultaneously accommodate two standard oxygen bomb and easy to assembly and disassemble. 3. Oxygen bombs are made of stainless steel 4, liquid bath is made of stainless steel, rust-proof and durable. 5. The oxidation bath is airtight, no vibration, no noise and no need for fluid replacement during the test. Technical parameters: •Electrical power: 220v± 10% 50hz ac, •Heating power: 2000 w. •Stirring motror1/83 h.P. •Temperature testing range: 105 c. •Temperature accuracy: ± 0.1°c. •Oxygen bomb pressure: range 0 ~ 1500kpa. •Pressure accuracy: 1 f.S. •Sampling time: 1 f.S. Applications: education / research, petroleum industry, power generation etc.
Originated in the Nordic Countries Nord Test is a trademark of conformity assessment. The emphasis of Nord Test is to develop, promote and innovate Nordic test methods and pre-normative activity. SCOPE: This procedure is for determination of the chloride migration coefficient in concrete, mortar or cement-based repair materials from non-steady-state migration experiments. FIELD OF APPLICATION: The method is applicable to hardened specimens cast in the laboratory or drilled from field structures. The chloride migration coefficient determined by the method is a measure of the resistance of the tested material to chloride penetration. This non-steady-state migration coefficient cannot be directly compared with chloride diffusion coefficients obtained from the other test methods, such as the non-steady-state immersion test or the steady-state migration test. DEFINATONS Migration: The movement of ions under the action of an external electrical field. Diffusion: The movement of molecules or ions under a concentration gradient or, more strictly, chemical potential, from a high concentration zone to a low concentration zone. SAMPLING: The method requires cylindrical specimens with a diameter of 100 mm and a thickness of 50 mm, sliced from cast cylinders or drilled cores with a minimum length of 100 mm. Three specimens should be used in the test. TEST METHOD: Principles: An external electrical potential is applied axially across the specimen and forces the chloride ions outside to migrate into the specimen. After a certain test duration, the specimen is axially split and a silver nitrate solution is sprayed on to one of the freshly split sections. The chloride penetration depth can then be measured from the visible white silver chloride precipitation, after which the chloride migration coefficient can be calculated from this penetration depth. Apparatus: • Vacuum container: capable of containing at least three specimens. • Vacuum pump: capable of maintaining a pressure of less than 50 mbar (5 kPa) in the container. • Migration set-up: includes the following parts: – Silicone rubber sleeve: inner/outer diameter 100/ 115 mm, about 150 mm long. – Clamp: diameter range 105 - 115, 20 mm wide, stainless steel. – Catholyte reservoir: plastic box, 370 × 270 × 280 mm (length × width × height). – Plastic support. – Cathode: stainless steel plate about 0.5 mm thick. – Anode: stainless steel mesh or plate with holes about 0.5 mm thick. • Power supply: capable of supplying 0 - 60 V DC regulated voltage with an accuracy of ±0.1 V. • Ammeter: capable of displaying current to ±1 mA. • Thermometer or thermocouple with readout device capable of reading to ±1 °C. • Any suitable device for splitting the specimen. • Spray bottle. • Slide caliper with a precision of ±0.1 mm. • Ruler with a minimum scale of 1 mm. • Equipment for chloride analysis as required by the test method employed.
Atomic absorption spectrophotometer comes with manual gas control system. It can work as standalone mode for routine analysis and can also be pc controlled. Salient features: •Microprocessor based, user friendly, menu driven with printer interface and optional pc attachment through rs232c interface. •Narrow beam optics fully sealed and quartz over coated mirrors. •Modes of operation include absorbance, emission and concentration. •Auto saving of all parameters & auto-bandwidth selection. •Integral gas control system with panel flow meters. •Precise knobs for vertical, horizontal and rotational alignment of titanium burner. •The software has facilities to repeat the result of the sample and data treatment. •Automatic calculation of percentage and ppm in base material. •Absorbance mode has the facility to measure sample absorbance for selected number of points and to calculate mean, sd and rsd. •Optional pc compatibility. •Microsoft windows® based software for data processing, storage, retrieval, interpretation etc. •Optional : hydride generator Software features: Microsoft windows® based pc operating software. •Easy user interface. •Linear / quadratic curve equation to predict the sample concentrations. •Modes of operation include absorbance, emission, concentration and standard addition. •Saving facility for the scanned data. Print facility for all the scanned data •Print facility for all the scanned data in graph and tabular formats. •Software is 21 cfr part 11 compliant with password method protection, instrument logbook etc Applications: •Academia & research •Soil testing •Micro nutrients •Fertilizer •Bio fertilizer •Pesticides
The Aniline Point of an oil is defined as the minimum temperature at which equal volumes of aniline (C6H5NH2) and the oil are miscible, i.e. form a single phase upon mixing. The value gives an approximation for the content of aromatic compounds in the oil, since the miscibility of aniline, which is also an aromatic compound suggests the presence of similar (i.e. aromatic) compounds in the oil. The lower the aniline point, the greater is the content of aromatic compounds in the oil. The aniline point serves as a reasonable proxy for aromaticity of oils consisting mostly of saturated hydrocarbons (i.e. alkanes, paraffins) or unsaturated compounds (mostly aromatics). Significant chemical functionalization of the oil (chlorination, sulfonation, etc.) can interfere with the measurement, due to changes to the solvency of the functionalized oil. METHOD A: ANILINE POINT APPARATUS as per IP 2 & IS 1448 (P-3), ASTM D 611 METHOD A, complete with jacket (without thermometer) Optional Accessories: • Spare outer jacket with cork Spare tube with cork • Heater for above with energy regulator METHOD B: ANILINE POINT APPARATUS as per IP-2 method B, IS 1448 (P-3), ASTM D 611 by thin film METHOD B, Electrically heated with motorized stirrer (without thermometer). The apparatus consists of an Archimedean type pump ie. glass tube pump body, S.S. pump, variable speed small motor, within an Aniline sample container with an integral light well, illuminated by a 6 V lamp. The whole assembly is heated in small glass beaker bath controlled by energy regulator. Electrically operated stirrer is also provided. Optional Accessories: • Spare tap • Spare Contraction chamber • Spare metal stirrer METHOD C: ANILINE POINT APPARATUS for volatile liquids as per IP-2 method ‘C’ (without thermometer). METHOD D: ANILINE POINT APPARATUS as per IP-2 1977, METHOD D by U-tube method electrically heated with FHP stirrer without thermometer. The apparatus consists of U-tube assembly which is mounted in a glass bath which is heated electrically and controlled by energy regulator. A small electric motor stirrer is provided for the bath. Optional Accessories: • Spare ‘U’ tube Thermometer for Aniline Point: • I.P.20C (-38/42ºC x 0.2C). • I.P.21C (-25/105ºC x 0.2C). • I.P.59C (90/170C x 0.2C).
The apparatus consists of brass test cup with handle removable cup cover with spring operated rotating shutter having oil test jet flame device, stirrer with flexible shaft. The assembly rests in air bath which is covered with dome shape metal top. The cup is fitted with insulated handle and locking arrangement near cup flange. The assemble is kept on round shape electric heater with temp. Regulator. Suitable for operation on 220 volts 50 hz. Pensky marten flash point apparatus (semi automatic) Our semi-automatic pensky martens flash point apparatus are available with following features: This apparatus is made as per ip34, astm d–93 and is 1448 (part i) 1270 (p.21) and is 1209-1953 method b. Used for finding out flash point above 70°c and below 300°c. The instrument having oil test jet (or) gas test jet flame device, stirrer with flexible shaft. The assembly rests in air bath which is covered with dome shape metal top. The cup is fitted with insulated handle and locking arrangement near cup flange. Electronic temperature controller with automatic dipping cycle with remote control oil (or) gas jet. Suitable to operate on 220 volts, 50 hz. Pensky marten flash point apparatus (fully automatic) Fully automatic pensky marten flash point apparatus is fitted with microprocessor controller with lcd display. Temperature range form 80 c to 350 c with 0.01c direct resolution. Automatic stirrer gas test jet system.
Concretes incorporating fly ash or silica fume are less permeable to deleterious elements and thus are more durable than conventional concretes. The Rapid Chloride-ion Permeability Test (RCPT) was designed to assess the resistance of concrete to the penetration of chloride ions, an indicator of its permeability. This is a fully self-contained, complete kit as per ASTM C 1202-05 including the following items: . • Plexiglass chambers with brass mesh, terminals and Steel bolts - 3 Pairs. • 60V DC Constant voltage power supply with 3 channels – 01 No. • 250 mm vacuum dessicator – 01 No.. • Vacuum pump – 01 No. • Double Stage Moisture trap – 01 No. • Electrometric Rubber Moulds for cylindrical specimens - 3 Nos. • Temperature probe – 01 No. • Consumables - good for 1 doz. tests o RTV sealant + gun – 01 No. o Acrylic sealer + brush - 01 No.
Slack wax sw 180, 120, 6501 various grade slack wax, from high to low melting point, various color and appropriate oil content.Packed in iron drum or iso tank. Hydro-treated white slack wax 500(medium paraffin) and hydro-treated white slack wax 150(light paraffin). Iron drums, ISO tank or flexi bag.
Min. order qty (MOQ) - 12,500MT. Direct with allocation holders. Spot contracts available upto 150,000MT per month 12 month contracts available upto 300,000MT per month. 50kg PP bags. Bulk shipment.
Specifications: Titanium Dioxide 1. CAS No.: 13463-67-7 2. Application: Titanium Dioxide is the most important white pigment used in rubber, paint, coating, dyestuff industry. It is widely used because it efficiently scatters visible light, thereby imparting whiteness, brightness and opacity when incorporated in related products. The active ingredient is of a rutile grades titanium dioxide. It is thermally more stable and resistant to chemical attack, and opacities better than anatase grade Titanium. 3. Packing: 25kg/pp bags and 22mt per 20¡¯/FCL without pallets. 4. Specification: Name Titanium Dioxide anatase Chemical Formula TIO2 appearance white powder Specifications: Testing Items Standard Tio2% min 98 Tint Redusing Powder min 100% Water Soluble Matter % max 0.4 PH value 6.5-8.0 Oil absorption(g/100g) max 22 Volatile Matter(105D) % max 0.5 Specific resistance(m) min 30 45mesh screen residues % max 0.05 Name Titanium dioxide rutile Chemical Formula TIO2 appearance white powder SPECIFICATIONs Crystal Form Rutile TiO2 Content(%) min 93 pH Value 6.5~8.5 Density(g/cm3) 4.0 Oil Absorption (g/100g) max 22 Relative tinting strength min 1780 Specific Resistance(m) min 150 Average Particle Size(¦Ìm) 0.32 Exterior & interior durability Excellent Packing: 25kg/pp bags and 22mt per 20/FCL without pallets.
Zinc Oxide 1. CAS No.: 1314-13-2 2. Appearamce:white powder,innocuous,odorless,stable under normal temperature.soluble in acid,alkali and ammonium chloride solution,insoluble in water and alcohol. 3. Applications: Rubber Industry, Paints Industry, Ceramics Industry, floor tile, glass, feed additive, etc. 4. Packing: 25 kgs in net bag, 20 mts in the 20¡¯FCL 5. Specification: Items 99% 99.5% 99.7% Content (ZnO) % 99 99.5 99.7 MnO% 0.0001 0.0005 0.0004 PbO% 0.15 0.05 0.037 CuO% 0.001 0.0005 0.0004 Heat Loss% 0.3 0.3 0.3 HCl Insoluble Matter% 0.01 0.01 0.01 Water Soluble Matter% 0.1 0.1 0.1 45um Sieve Residue% 0.15 0.15 0.15. Packing: 25 kgs in net bag, 20 mts in the 20FCL.
Specifications: 1. CAS No.: 9004-32-4 2. Molecular formular: [C6H7O2(OH)2CH2COONa]n 3. Packing: 25kg pp bags and 20mt per 20¡¯/FCL 4. Specification: 5. CMC is a polyanionic cellulose ether. It has good solubility in both hot and cold water. It is used in drilling mud; in detergents as a soil-suspending agent; in resin emulsion paints, adhesives, printing inks, textile sizes, as stabilizer in foods, as protective colloid in general, as pharmaceutic aid. Item Specification of CMC Detergent Grade LV MV HV Viscosity 10-40 200-250 800 Purity 60 75 95 D.S 0.60 0.70 0.80 Moisture 10 10 10 PH Value 8.0 C 11.5 8.0 C 11.5 6.5 C 8.0. Packing: 25kg pp bags and 20mt per 20/FCL.
Sodium Hydroxide 1. CAS NO.: 1310-73-2 2. Molecular formula: NaOH 3. Packing: 25kg/bag, 25MT/20¡¯FCL 4. Specification: Name Caustic Soda 99% Item standard Purity % 99Min Sodium hydroxide % 99 Min Sodium carbonate % 0.9Max Sodium chloride % 0.15Max Ferric oxide% 0.007Max 5. Property: white solid or flakes with strong corrosiveness,easily soluble in water, presenting alkaline solution and heat liberation,presenting deliquescence when exposed to air. 6. Usage: Caustic Soda Pearls 99% is basic and important chemical feed.used as textiles industry, printing, detergent, paper-making, soap-makinmetallurgy, glassenamel, medicament, oil-refining and making synthetic fiber, plastics and many kinds of organic-mediacy, etc. Packing: 25kg/bag, 25MT/20 FCL.
Building intercom system, desktop video door phone, black & white or color video wall mount phone, villa / mansion door phone, apartment phone hotel door phone. Boxes.
Delivery: Proposed Base xxK or xxM/MT/MONTH as in SPA Origin: RUSSIA / CIS/ Middle East Duration: TBA IN SPA, with possible monthly Rolls Loading Ports: Black Sea / Selleríªs choice Quantity Minimum 20,000 MT / as per buyeríªs Interest Delivery: CIF ASWP Packing 50 Kg Bags Performance bond 2% Cargo survey SGS inspections Shipment Prompt shipment immediately upon acceptance of BG / SBLC.
Chemicals & allied products, fish products, demerara brown cane sugar, oil products, livestock, poultry, meat, animal products, farm products, grains, fruits, fresh meat, frozen meat, mercury, fertilizers, pesticides, seeds, acid products, catalytic converter scrap, frozen turkey meat, ceramics, inorganic and organic chemicals, leather products, agricultural chemicals, aromatic chemicals, cosmetic chemicals, detergent chemicals, food chemicals, paper products, gemstones, nuts and kernel products, copper scrap, beans products, fuel & energy resources, energy drinks, refrigeration, medical, rubber products, printing packaging products, processed food & beverages products, cosmetics, pigments chemicals, metal products, ores & minerals, metal scraps, metallic elements, petroleum, oil & related products, non metallic elements, plastic products.
Ferrochrome, ferrosilicon,manganese metal, ferromanganese, calcium siliocn,calcium silicon barium,Nitrided low carbon ferro chrome, calcium wire.
Activated Carbon, Coconut Shell, Coconut Charcoal and Powder Anode Butts Carbon Block, Bentonite Powder, Salt, China Clay and Iron Ore, copper bonded rod, lightning arrester, Earthing minerals, ESE lightning arresters.Manufactures, Shipping
Carbon based products, graphite, graphene, paint, activated carbon, coal, biochar, bitumen.
Solvents, Acetone, Isopropyl Alcohol, Polyester Resin, Vinyl Ester Resin, Epoxy Resin, Urethanes, Fiberglass Mat, Fiberglass Cloth, Fiberglass Woven Roving, Fiberglass Spray-Up Roving, Carbon Fiber, Fillers, Waxes and Releases, Sealers, Adhesives, Catalysts, Tools, Core Materials.Distribution Business
