Rail Laser Versine Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device, target positioning device and moving positioning target device . BENEFITS 1.Quick Installation The operator can put this device on the track in seconds 2.Saving money in repeat work and accuracy 30m at a time with 99.99% reduction on repeat works and rapid deployment 3. Vernier adjustment knob ensuring accurate readings The vernier adjustment knob assist the operator to ensure a perfect horizontal position ensuring accurate reading . 4. Stored in a dedicated protective case ,Easy to carry Laser measure distance:30m Laser center spot:10mm30m distance area Point range:horizontal-30+60mm,vertical-30+60mm target positioning device and moving positioning target device resolution:2mm 1 Battery capacity (laser transmitter):Continuous use for 4 hours
The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of the rail track under the wheel load with cone tread stressed uniformly ,decrease load offset, reduce rail web stress , avoid slit between rail head and rail web, the railway track shall not be laid upright for straight line, it shall be inward inclined ,this inward inclination of rail called Rail Cant, it is a high precision ,portable , numeric rail geometrical testing tool. BENEFITS: 1.Stable performance ,protect electromagnetic interference . 2.One piece structure design ,light and handy ; 3.magnetic self-absorption function ; 4.Data display is clear and intuitive 5.The function of temperature of environmental temperature factors on the measurement data 6.Power saving function :The system will shutdown automatically if there is no operation in 5 minutes . Model:JG-SO1 Power Supply Mode: Built-in lithium battery charging Operating Temperature:-30° +60° Measuring Range:±110 ±1200 Operating Current:40mA Size:225*90*60mm
Product Description Rail Laser Versine Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device . Benefits 1.Quick Installation The operator can put this device on the track in seconds 2.Saving money in repeat work and accuracy 30m at a time with 99.99% reduction on repeat works and rapid deployment 3. Vernier adjustment knob ensuring accurate readings The vernier adjustment knob assist the operator to ensure a perfect horizontal position ensuring accurate reading . 4. Stored in a dedicated protective case ,Easy to carry Specification Laser measure distance 30m Lser center spot 10mm 30m distanceare Point range horizontal 30+60mm vertical 30+60mm target positioning device and moving positioning target device resolution 2mm 1 Battery capacity (laser transmitter) Continuous use for 4 hours
Product Description The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of the rail track under the wheel load with cone tread stressed uniformly ,decrease load offset, reduce rail web stress , avoid slit between rail head and rail web, the railway track shall not be laid upright for straight line, it shall be inward inclined ,this inward inclination of rail called Rail Cant, it is a high precision ,portable , numeric rail geometrical testing tool. Benefits 1.Stable performance ,protect electromagnetic interference . 2.One piece structure design ,light and handy 3.magnetic self-absorption function 4.Data display is clear and intuitive 5.The function of temperature of environmental temperature factors on the measurement data 6.Power saving function :The system will shutdown automatically if there is no operation in 5 minutes . Specification Model JG-SO1 Power Supply Mode Built-in lithium battery charging Operating Temperature -30° +60° Measuring Range 10 200 Operating Current 40mA Size 225*90*60mm
1. Screen size: 15.6 inches (IPS display), resolution: 3840*2160(UHD) 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut and IPS high-definition screen.It also has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience:with 16384 pressure level, the pen draws different lines and different inclination to make the painting more rich. The nib uses a special technology to truly restore the delicate friction between the nib and the screen, just like drawing on paper. 4.High light transmission toughened glass design, seamless fit, which can restore colors and precise positioning. 5.Convenience: 8 user-defined shortcut keys on both side is designed for both left-right handed users; No need for battery or charging, support natural tilt of plus or minus 60°; Batter-free pen needs no wire and charge. 6.Comfort:The adjustable and foldable stand has two angles that can be adjusted 60°(55°~60°)/30°(25°~30°), which can create a comfortable angle, everyone can find their best angle.
1. Screen size: 15.6 inches (IPS display), resolution: 1920*1080 2.Color: Features natural and vivid colors to meet the professional visual requirement for drawing,design or image editing,due to the 120% sRGB coverage of the screen color gamut and IPS high-definition screen.It also has a wide viewing angle of 178°with clear vision from vision from different angles and no color deviation. 3.An exceptional drawing experience:with 16384 pressure level, the pen draws different lines and different inclination to make the painting more rich. The nib uses a special technology to truly restore the delicate friction between the nib and the screen, just like drawing on paper. 4.High light transmission toughened glass design, seamless fit, which can restore colors and precise positioning. 5.Convenience: 8 user-defined shortcut keys on both side is designed for both left-right handed users; No need for battery or charging, support natural tilt of plus or minus 60°; Batter-free pen needs no wire and charge. 6.Comfort:The adjustable and foldable stand has two angles that can be adjusted 60°(55°~60°)/30°25°~30°), which can create a comfortable angle, everyone can find their best angle.
Features The benefits of our rolling gauge : 1. Measure the track gauge, cant without bend over your back. 2. Light weight : around 6.5kg , one person operation. 3. BT connection, data uploading and analysis system. 4. High working efficiency. Save your man power. ( 1 man with 1 rolling gauge = 4 man with 4 normal digital track gauge) Specification Model (1435mm) GJC-JJG0 Track gauge 1410-1470mm Superelevation measuring range -185~+185mm Display mode OLED display and hand-held terminal display Supply Voltage DC3.4V 5.2V (rechargeable battery) Superelevation division value 0.05mm Working temperature -30â?? +55â?? Insulation performance 1M�© Track gauge division value 0.01mm Superelevation division value 0.05mm Track gauge max indication error ±0.25mm Superelevation max indication error ±0.3mm Length 1700mm Net Weight 6.5kg
Model V222TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 1000(736)/2,300 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 191 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,830
Model V180TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 820(603)/2,300 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 187 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,630
Model V222TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 720(530)/1,800 Displacement( cc ) 21,927 Cylinder number - bore x stroke( mm ) 12 - 128x 142 Compression ratio 15 : 1 Firing order 1 â?? 12 â?? 5 â?? 8 â?? 3 â?? 10 â?? 6 â?? 7 â?? 2 â?? 11 â?? 4 â?? 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 129 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 98 / 87 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,973 x 1,233 x 1,606 Engine dry weight (KG) 1,750
Model V180TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 650(478)/2,100 Displacement( cc ) 18,273 Cylinder number - bore x stroke( mm ) 10 - 128x 142 Flywheel housing & y wheel (inch) SAE 1 & 14 Compression ratio 15.5 : 1 Firing order 1 - 6 - 5 - 10 - 2 - 7 - 3 - 8 - 4 - 9 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 141 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 92 / 81 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Rubber impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,495 x 1,222 x 1,169 Engine dry weight (KG) 1,550
Model V158TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 680(500)/2,300 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 10.89 Compression ratio 14.6 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 130 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,435
Model V158TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 540(397)/2,100 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 9.94 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 100 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Model V158TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 480(353)/1,800 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 8.52 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 85 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
This lighting fixture designed for sliding installation is more convenient, and this led linear light adopts stainless steel base, so that the intensity of this led linear luminaire can achieve IK10. This linear luminaire has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this led batten light fitting can achieve 125lm/w. The safety hooks design of this led� light fitting is more convenient and safe for installation. The clip-fixed backup battery design of this led linear light fitting makes the maintenance and replacement more easier. And the� emergencny function enable the led batten light � to operate continuously for more than 3 hours in emergency situations. It's very practical. Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-NSBLP60-5FT-CES Color Temperature(CCT): 3000/4000/6000K Input Voltage(V): AC 220V(± 10%) Color Rendering Index(Ra): 80 Support Dimmer: Yes Lifespan (hours): 50000 Working Time (hours): 50000 Length: 5ft Beam angle: 120 Degree
5FT weatherproof emergency luminaires with sensor dimming function The weatherproof emergency luminaires adopts LED chips SMD2835, so the LED emergency luminaires can achieve 130lm/w high lumen out put. This Corrosion-resistant Weatherproof Batten Light has emergency function, able to ensure lighting for more than 3 hours in the event of a power outage. The emergency battery of this Batten Lighting Fixture has a special clip-fixed housing, it's easy for maintenance and replacement. The protection rating of this Weatherproof LED Batten Fixture is high up to IP65, has a high dustproof and waterproof performance. Lamp Luminous Efficiency(lm/w):120 IP Rating:IP65 Warranty(Year):5-Year Place of Origin:Guangdong, China Color Temperature(CCT):3500-6500K Color Rendering Index(Ra):82 Support Dimmer:Yes Emergency Function:Yes Lifespan (hours):70000 Working Time (hours):70000 Lighting solutions service:Lighting and circuitry design, DIALux evo layout, auto CAD layout Light Source:LED CRI (Ra>):80 Model Number:ZL-EWPLP60-5FT-S Brand Name:COMLED Input Voltage(V):AC200-240V Working Lifetime(Hour):70000
Rail Cant Measurement Device The main part of the wheel tread is an inward inclination of 140 In order to make the top of the rail track under the wheel load with cone tread stressed uniformly decrease load offset reduce rail web stress avoid slit between rail head and rail web the railway track shall not be laid upright for straight line it shall be inward inclined this inward inclination of rail called Rail Cant it is a high precision portable numeric rail geometrical testing tool Benefits 1Stable performance protect electromagnetic interference 2One piece structure design light and handy 3magnetic selfabsorption function 4Data display is clear and intuitive 5The function of temperature of environmental temperature factors on the measurement data 6Power saving function The system will shutdown automatically if there is no operation in 5 minutes Specification Model JGSO1 Type Rail Cant Measuring Device Material Aumunium Dimensions L x W x H 2009060mm Measure range 110 1200 Power 40mA Power Supply Mode Builtin lithium battery charging Size 2259060mm Working temperature 30 60
Portable Rolling Track Gauge is mainly used for railway track gauge and superelevationcant check rail gauge and back to back distance measurementIt can be used for track inspection and fine adjustment of rail gaugeThis product has the advantages of fast measuring speed stable pushing rod easy to carryand nighttime and tunnel worklegible even in direct sunlight are supportedIt is an ideal measuring tool for track finetuning track constructioninspection and track laying Features The benefits of our rolling gauge 1 Measure the track gauge cant without bend over your back 2 Light weight around 65kg one person operation 3 BT connection data uploading and analysis system 4 High working efficiency Save your man power 1 man with 1 rolling gauge 4 man with 4 normal digital track gauge Specification Model 1435mm GJCJJG0 Track gauge 14101470mm Superelevation measuring range 185185mm Display mode OLED display and handheld terminal display Supply Voltage DC34V52V rechargeable battery Superelevation division value 005mm Working temperature 3055 Insulation performance 1M Track gauge division value 001mm Superelevation division value 005mm Track gauge max indication error 025mm Superelevation max indication error 03mm Length1700mm Net Weight 65kg
This sliding design led linear luminaire is easy for installation, and this led linear luminaire adopts stainless steel base, so that the intensity of this led linear luminaire can achieve IK10. This led linear luminaire has high transmittance milky diffuser and high lumen out put SMD2835 LED chips, so that the luminous efficiency of this led linear luminaire can achieve 125lm/w. The safety hooks design of this led linear luminaire is more convenient and safe for installation. The clip-fixed backup battery design of this linear lighting fixture makes the maintenance and replacement more easier. And the emergencny function enable the linear lighting fixture to operate continuously for more than 3 hours in emergency situations. It's very practical. Lighting solutions service: Lighting and circuitry design, DIALux evo layout, Agi32 layout Model Number: ZL-NSBLP20-2FT-CS-3CCT Color Temperature(CCT): 3000/4000/6000K Input Voltage(V): AC 220V( �± 10%) Color Rendering Index(Ra): 80 Support Dimmer: Yes Lifespan (hours): 50000 Working Time (hours): 50000 Length: 2ft CCT: 3000/4000/6000K Beam angle: 120 Degree
A&S Construction Machinery Co., Ltd. supplies all types of drive shafts. All the brands of drive shafts we can provide: CAT drive shafts, KOMATSU drive shafts, JOHN DEERE drive shafts, SANY drive shafts, XCMG drive shafts, VOLVO drive shafts, HITACHI drive shafts, SUMITOMO drive shafts, LIEBHERR drive shafts, DOOSAN drive shafts, CASE drive shafts, BOBCAT drive shafts, KUBOTA drive shafts, YANMAR drive shafts, HYUNDAI drive shafts, DAEWOO drive shafts, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
