LJ-LDG1901 Electric Rail Drilling Machine 36V Intelligent lithium battery rail drilling machine *Fully waterproof design, support rainy day work *Clean energy, green and pollution-free *Intelligent control system, keeps drilling at a constant speed, and displays the number of holes with remaining power *Super endurance capability : Drilling more than 40 holes each charge (31 mm diameter hole) Drilling more than 110 holes each charge (13.5 mm diameter hole) Drilling more than 180 holes each charge (9.8 mm diameter hole) *Ultra-light weight, only 15.9 kg including battery *Overload reminder and protection design *Quick-change design of the drill bit, do not need any additional tools
The internal combustion rail drilling machine is suitable for high-power track maintenance machinery working between areas without power supply. The machine uses Japanese internal combustion engine as power Source, small size, simple operation, easy maintenance, it is the ideal machine for drilling 75kg, 60kg, 50kg, 43kg rail. Local borehole The machine is suitable for the public works and engineering department to drill the joint hole of the rail and the basic rail of the switch, and is also suitable for the electrical and engineering department to guide the rail The cable plug hole is drilled. The public works department uses �?31 hollow drill bit, and the electric department uses special twist drill bit. The drilling machine has safe and reliable, Fast card loading, high drilling accuracy, short time, fast efficiency, light weight, simple operation, flexible and convenient features. The drilling machine is composed of clamp, shaft sleeve feeding device, working device, reducer, gasoline engine, scale and other parts. Gasoline engine power through Clutch, reducer, working device, transfer spindle to drive drill bit rotation.
LJ-LDG1901 Electric Rail Drilling Machine 36V Intelligent lithium battery rail drilling machine *Fully waterproof design, support rainy day work *Clean energy, green and pollution-free *Intelligent control system, keeps drilling at a constant speed, and displays the number of holes with remaining power *Super endurance capability : Drilling more than 40 holes each charge (31 mm diameter hole) Drilling more than 110 holes each charge (13.5 mm diameter hole) Drilling more than 180 holes each charge (9.8 mm diameter hole) *Ultra-light weight, only 15.9 kg including battery *Overload reminder and protection design *Quick-change design of the drill bit, do not need any additional tools
The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use. The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically. Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda) Maximum hole diameter 31mm Spindle revolutions 250~ 285r/min Drilling time 40S Dimensions 800 X 340 X 400mm Net weight of the whole machine 23kg
The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use. The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically. Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda) Maximum hole diameter 31mm Spindle revolutions 250~ 285r/min Drilling time 40S Dimensions 800 X 340 X 400mm Net weight of the whole machine 23kg
Product Description NGM-4.8I Digital Display Rail Grinding Machine NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine. Specification Model NGM-4.8I Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1500 * 450 * 750 mm Internal combustion engine GX200, > 3600r/min, 4.8kW Grinding Wheel Specification 125*65*M20 Grinding Wheel Linear Velocity > 35m/s Spindle rotation 4500r/min Inclination angle of grinding wheel +90 degrees Accuracy of inclination angle 0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree Grinding wheel stroke 45 mm Grinding wheel feed accuracy 0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm Profile wheelbase 1000mm Weight 90kg
Product Description YCD-2 Hydraulic Tamping Machine YCD-2 hydraulic tumout tamping machine is a special mainenance mechanical equipment for railway turmouts. it is mainly used for tamping the seeper bllast in the tumout section, and can also take into account the tamping efect of the main track bed ballast. Specification Model YCD-2 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1420*660*1380mm Engine HONDA GX390 petrol engine Power 6.6 kW Vibrating frequency 60~70 Hz
Product Description YD-22 Hydraulic Rail Tamping Machine The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency 270 pieces / (group hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
Product Description NQG5III Rail Cutting Machine NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Specification Model NQG5III Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (70m /s) Cutting time 60kg / m rail, 120S Number of usage 50kg /m rail, use 4 times 60kg /m rail, use 3 times Machine weight 39.5kg
