Ptfe thread seal tape , ptfe teflon tape, teflon tape, plumbing tapes, adhesive tapes, ptfe plumbing tapes, ptfe sealants.
Alkali-resistant Fiberglass Mesh is mainly used for EPS board(exterior insulation system of external walls),this products uses the machine-woven material of moderate-alkali or non alkali as material and treats with alkali-resistant coating. The strength and alkali-resistance of the products are very good,and it plays an important role in insulation system,it is mainly used to prevent crack.Because of its good resistance of chemical corrosion such as acid-resistant ans alkali-resistant and high strength of longitude and latitude,it can distribute the stress on the insulation system of external walls,avoid deformation of the insulation system caused by external impact and pressure ,and improve the impact-resistance of the insulation. Besides,ití»s easy to install and quality control,it acts as the "soft steel barin " the insulation system. Ordinary Specification : 1.Mesh Size:4mm*4mm,5mm*5mm; 2.Weight/m2:65g-300g; 3.Length/roll:50m,100m; 4.Width:1m,2m; 5.Color:White(standard,blue,green, or other colors; 6.Packing:Each roll packed into shrink-wrapping plastic bag,then put into carton. 7.Special specification and package can be ordered and produced according to customers requirement. Shrink film packing,then in carton.
Fiberglass stitched mat is made from chopped fiberglass strands or woven roving which is cut into a certain length and randomly dispersed , laid on a roving matrix then stitched together with organic fibers. Fiberglass stitched mat is used in unsaturated polyester resin strenthen, primarily in pultrusion, rtm, filament winding and hand lay-up processed. Such as pultruded parts, pipes, storage tanks, wind generator blades and other frp products. Product properties: 1. Even thickness, high wet tensile strength retention 2. Directional properties and strengths same to woven roving 3.Enough hollows on surface to make it good permeability 4. Flexibility to design variety weaving structures 5. Stable structure required to achieve maximum tensile strength properties. Shrink film packing and sealing and then package them with carton.
HYDROPHOBIC Glass Nano Coating in a convenient 500ml pack.CERAMIC CNANOCOATING! Empowered with graphene, this eco-friendly solution provides advanced protection for your glass surfaces. Prevent soap, dust, and scaling buildup, while enjoying a crystal-clear and glossy appearance. With easy application and a coverage rate of 2ml per square foot, upgrade your glass with this cutting-edge solution. Guaranteed 3-year protection for both interior and exterior surfaces. Experience hassle-free maintenance and long-lasting beauty with ARMI Brand Glass Nano Coating. Armi�®ï¸? Brand Glass Nanocoating ð???ð??? Simply the best option â?¨ Performs much, much better ð??? Reliable ð??¡ï¸? True Graphene product ð??? Global buyer ð??? Upgrade your glass with ARMI Brand Glass Nano Coating! Empowered with graphene, this eco-friendly solution keeps your glass surfaces stunning and glossy. No more soap, dust, or scaling buildup! Say hello to a crystal-clear appearance that lasts. With easy application and 2ml per square foot coverage, it's hassle-free. #GlassProtection #EcoFriendly #GraphenePower #LongLasting #EasyApplication #StunningResults Guaranteed 3-year protection for interior and exterior surfaces. Enjoy hassle-free maintenance and long-lasting beauty. Order now!
Fiber glass mat.
Fiberglass sheets.
PTFE Packing With Chemical Resistance And Low Friction CoefficienT PTFE packing or Teflon packing is a braided packing made of high purity PTFE (poly tetrafluoroethylene) yarn without soaking any PTFE dispersion and lubrication. PTFE packing is a kind of self-lubricating, chemical inert, non-toxic and non-hazardous material. In addition, PTFE is called "king of plastic" and causes no pollution to the medium or liquid. More importantly, PTFE is known for its outstanding resistance to chemical attack, low friction coefficient, low water absorption and wide temperature tolerance (including cryogenic applications). Due to the above advantages, PTFE packing is widely used in chemical processing, food processing and pharmacy. COMMON SPECIFICATION Maximum Temperature 280 °C Pressure Rotating 1.5 MPa Reciprocating 10 MPa Valve 15 MPa Velocity 5 m/s pH 0 to 14 Density 1.41.6 g/cm3 Size Code (inch) 1/8 1/5 1/4 1/3 3/8 4/9 1/2 5/9 5/8 3/4 7/8 1 Cross Section (mm) 3 5 6.5 8 9.5 11 12.5 14 16 19 22 25 FEATURES Long lasting performance. Good flexibility and compressibility. Tough interlock braid. Superior chemical resistance. Resistant to the impact of water, steam, oil, fuel, solvent, acid and alkali. Low friction. APPLICATIONS PTFE packing is ideal for general valve and pump (including rotating, centrifugal and reciprocating pump) applications in chemical processing, food processing, cryogenic applications, industrial gas processing and hospital. White PTFE packing is applied in the valve. PTFE packing for valve
Description The chemical, electrical and thermal performance of ptfe is second to none among any other available plastics. So it is known as ¡¡ãthe king of plastic¡¡à. It is among the most widely used of all the fluoropolymers. Applications bearings gaskets sealing rings wear rings By plastic pallet or wooden pallet
Description The chemical, electrical and thermal performance of ptfe is second to none among any other available plastics. So it is known as ¡¡ãthe king of plastic¡¡à. It is among the most widely used of all the fluoropolymers. Characteristics -non-stuck Applications Bearings Gaskets Sealing rings Wear rings Friction pads Insulators Chemical resistance linings Medical apparatus such as hoppers, beakers By plastic pallet or wooden pallet
PTFE/Teflon sheet can be made by skived and molded techniques, so both skived PTFE(teflon) sheet and molded PTFE(teflon) sheet can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE sheet according to customers' different demands. As PTFE has a very low co-efficient of friction, the surface of PTFE sheet has similar friction levels to ice. PTFE can work at -180 C ~+260 C and is the best electrical insulator of all known plastics. PTFE sheet can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material, etc. Remarks: We can also produce PTFE(Teflon) sheet in other sizes and thickness according to customers' specific requirements. Property UnitResult Apparent Densityg/cm32.10-2.30 Tensile Strength MPa20 Crack Elongation %250 Dielectric StrengthKV/mm10 Working TemperatureC-180C ~ + 260C Length(mm) x Width(mm)Thickness(mm) NorminalTolerance 150 x 1501.0-30¡À0.30 ~ ¡À0.50 250 x 2501.5-30¡À0.30 ~ ¡À0.50 300 x 3001.5-30¡À0.30 ~ ¡À0.50 450 x 4501.5-30¡À0.30 ~ ¡À0.50 600 x 6002-30¡À0.30 ~ ¡À0.50 800 x 8003-30¡À0.30 ~ ¡À0.50 1000 x 10003-30¡À0.30 ~ ¡À0.50 1200 x 12003-30¡À0.30 ~ ¡À0.50 1000 x 20005-30¡À0.30 ~ ¡À0.50 1500 x 15005-30¡À0.30 ~ ¡À0.50 1800 x 18008-30¡À0.30 ~ ¡À0.50 2000 x 20008-30¡À0.30 ~ ¡À0.50
PTFE/Teflon rod can be made by extruded and molded techniques, so both extruded PTFE(teflon) rod and molded PTFE(teflon) rod can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE rod according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE rod has similar friction levels to ice. The material of PTFE can work at -180 C ~+260 C and is the best electrical insulator of all known plastics. Extruded teflon PTFE rod can be used as lining, seal components, wire isolation, slide block, gasket, seal, dielectric material and so on. Remarks: We can also produce PTFE(Teflon) sheet in other sizes and thickness according to customers' specific requirements.
PTFE/Teflon tube can be made by extruded and molded techniques, so both extruded PTFE(teflon) tube and molded PTFE(teflon) tube can be offered. Meanwhile, we can use virgin, recycled or mixed PTFE material to make PTFE tube according to customers' different demands. As the material of PTFE has a very low co-efficient of friction, so the surface of PTFE tube has similar friction levels to ice. The material of PTFE can work at -180 C ~+260 C and is the best electrical insulator of all known plastics. PTFE tube can be used as wire and cable jacket, inner lined pipes for corrosive fluids and used in hydrochloric acid heat exchanger, etc. Remarks: We can also produce PTFE/Teflon tube in other diameters and lengths according to customers' requirements.
PTFE scrap : 40, 000 lbs. Sea worthy packing.
PTFE Teflon sheet: PTFE teflon sheets are available in various sizes form 0.5mm to 50mm thk. In width of 300 x 300, 600 x600, & 1 mtr. X 1mtr.
PTFE (teflon) sheet.
Features:1) PTFE tubing is manufactured with ram extruding method using PTFE granular resin 2) PTFE is the most chemical-resistant material of all known plastic 3) With the best electrical properties among plastic materials 4) Applications: insulating cover for conductor, pipe for corrosive fluids Properties:1) Apparent dendsity: 2.10~2.30g/cm3 2) Tensile strength (min.): 18MPa 3) Ultimate elongation (min.): 230% Extruded Tube Min OD=0.5mm, Max OD=250mm, Length according to customer's request Molded Tube Min OD=30mm, Max OD=1000mm, Length: Min=100mm, Max=300mm
Ptfe teflon rods Ptfe teflon rods are available from 6mm dia to 500mm dia in pure teflon and various filled grades
PTFE (Teflon) tube
Fiberglass epoxy laminates, epoxy and polyester sheet, epoxy and polyester tube.
All types of Glass Bottles are available with Coating/Frosting/Metallizing.
