Aokeray ptfe tubing heatshrinktubesNET manufacturer from PTFE/FEP/PFA tube PTFE Teflon Insulated Tubing ,PFTE RAW MATERIAL is FROM most commonly known as DakiN a brand name .USE ON sleeve bearings, push-pull cables, non-stickroller covering etc Control Cable Assemblies ,Motorcycle Cables PTFE TUBING ,ptfe lined tubing. Car cable high temp Teflon liner ,MOTORCYCLES Cable,Hydraulic clutch, brake and oil,Clutch and brake fluid, oil transfer .PTFE hose is specified in many of the most challenging industrial applications such as those found in steel mills, foundries, transit trucks and buses and air compressors..It is also an ideal choice for vacuum/steam lines, spray paint, marine/military, aerospace, biomedical,chemical processing, industrial adhesive, paper mill.The extruded PTFE tube has excellent flex life, high temperature tolerance and superior chemical resistance.QCSS PTFE hose working temperature range is -70 to 260 degree. A reinforcement 304/316 stainless steelwire cover adds strength and durability to withstand high working pressures and harsh environments.Burst pressure reaches to 12,000 psi.Production under ISO 9001:2008 and CE control. High quality product and customer'ssatisfaction is our pursuit. Good faith cooperation. Bright future.40°C and 260°C. Applications: For transfer of high purity products, chemicals, dairy and cosmetic products. Also suitable for heat exchangers and as protective sleeve for cables. They have excellent heat resistance, viscosity, chemical resistance, electrical insulation, etc,we also help custom like annealing, beveling, bonding, printing, marking, tipping, punching, flaring ect. .Aokeray ptfe tubing,heatshrinktubesNET
DTech Products PTFE bellows are used as balancing elements between engineering parts. PTFEâ??s outstanding material properties allow bellows to be used in medical, food, and other general industrial applications. Our PTFE Bellows are manufactured by observation under the professionals using high-quality tested raw material, which is at par with industry standards. We are producing bellows which are corrosion resistant and provide longer service life. Our range is widely used in different chemical plants and other industrial applications.
Teflon (PTFE) heat shrinkable tubing, half hard, flame-retardant, can use for a long time under the high temperature of 200 deg. celius, almost resistant to all the oils and chemicals.
PTFE tube 1) Used as insulated cover for corrosive gas and liquid 2) Acid and alkali resistant 3) Has the best electrical properties among plastics 4) Over 50 molds are available 5) All sizes available on customers'request all sizes available
1. High temperature resistance: the working temperature is 260 , and Teflon heat shrinkable pipe has excellent heat resistance. It can be used continuously between 240 and 260 for a short time, which can withstand high temperature to 300 , and has remarkable thermal stability and does not melt at high temperature. 2. Low temperature resistance: it has good mechanical toughness and low temperature resistance; Even if the temperature drops to -65 , it can work at freezing temperature without embrittlement. 3. Corrosion resistance: for most chemicals and solvents, it shows inertia, strong acid and alkali resistance, water and various organic solvents. Teflon heat shrinkable pipe is almost free from drug erosion, and can withstand reactions of alkali metal, strong oxidant, reductant and various organic solvents except molten, and can protect parts from any kind of chemical corrosion. 4. Climate resistance: it has the best aging life, radiation resistance and low permeability in plastic. It is exposed to the atmosphere for a long time, and the surface and performance remain unchanged. 5. High sliding property: the friction coefficient of solid material is the lowest, and Teflon heat shrinkable tube has lower friction coefficient. The friction coefficient changes when the load slips, but the value is only between 0.05-0.15. 6. Non adhesion: the minimum surface tension in solid materials, and no adhesion to any material. Almost all the substances are not bonded with Teflon heat shrinkable tube, and very thin Teflon shrink tube also shows good non adhesion performance, which can prevent dust adsorption. Teflon heat shrinkable pipe surface is not contaminated with water and oil, and it is not easy to dip in solution during production operation. If there is a little dirt, it can be removed by simple wipe. 7. Flame retardant: oxygen limit index is below 90, and it can reach VW-1 high flame retardant grade. 6. Electrical insulation: it can resist 1500 V high voltage electricity, and is not affected by environment and frequency. The volume resistance can reach 1018 ohm �· cm, and the dielectric loss is small and the breakdown voltage is high. 8. Environmental protection: it does not contain substances harmful to the environment such as PCBs, PCPs and PBBs, PBBs, pbbos, PBBEs and PBDEs, which are in conformity with European ROHS environmental standards. To sum up, Teflon heat shrinkable tube has the advantages of high temperature resistance, low temperature resistance, corrosion resistance, anti-aging, low friction coefficient, no adhesion, flame retardant and environmental protection. It is an ideal material for the protection of important components.
We are a professional manufacturer of heat shrink tubing and have been doing business in this field for more than 10 years, with a good reputation and many regular customers all over the world. We can also accept any kind of customized heat shrink tubing type, as well as customized outer or inner packaging. It is used in the fields of insulation and mechanical protection in the environment of chemical corrosion resistance and high temperature resistance, such as the insulation, protection or identification of transformers and sensors in the industries of electronics, communication, automobile, ship, aircraft manufacturing, etc.And we have the right High Temperature Resistance Teflon Heat Shrinkable Tube to meet your needs. Product features 1. Applicable temperature range: - 80 ~ 200 2. Semi hard, flame retardant, long-term use at 200 3. Shrinkage ratio: 1:1.7 4:1 4. High mechanical strength, wear resistance, high pressure resistance, corrosion resistance, almost all oil and chemicals resistance 5. Color standard: transparent, other colors need to be customized We guarantee reasonable prices and satisfactory quality, making it a good fit for your own brand. We can offer: - Competitive prices - High quality products - Sample orders accepted - Secure payment and delivery worldwide - Free shipping for bulk orders For custom production and any questions, please feel free to contact! Looking forward to be your supplier in China and have a long term cooperation. Contact us:Mors
Supplier: Thread seal tape, PTFE tape, teflon tape, gas tape, oil tape, tube fitting
Services: OEM
Supplier: Teflon tape, P.T.F.E.thread, seal tape
Buyer: Teflon tape.
Supplier: Masking tape, PTFE tape, teflon tape, gland packing, PTFE yarn
Services: Manufacturer
Buyer: PTFE resin
