An anchor brick for an industrial furnace top, comprising a cylinder consisting of a hanging end and an anchor, a spaced-apart groove formed on the surface of the anchor, and a rib in the longitudinal direction on at least one surface of the anchor , after the installation of ribs, due to the reinforcement and pulling effect of the bar, the tensile strength of the anchor is significantly improved, the stress generated at the groove in the ribs can not continue to pass the barrier, so the structure of the anchor brick is not easy fracture occurs.
Vermiculite insulation brick is widely used in construction, shipbuilding, metallurgy, electric power, aerospace and other fields, the specific application in: 1, fire door core; 2, senior kitchen utensils, furniture; 3, hull plate; , Ventilation system; 5, commercial banks, libraries, hotels, restaurants, entertainment venues, senior residential, ordinary residential, etc .; 6, furnace insulation; 7, fireplace insulation; 8, industrial insulation materials. Excellent anti-fungal, moth-edged; can be sawed, nailed, planing, drilling, easy to install and construction
Refractory and insulating bricks has low thermal mass which means that it does not retain heat, low thermal conductivity and is an extremely effective insulation material. Dita refractory and insulating â product family is a group of lightweight, thermally efficient ceramic fiber insulating materials that combine the advantages of dimensional stability at high temperatures with complete resistance to thermal shock. Featuring a broad range of thermal capabilities and physical characteristics, this product family provides proven and effective solutions to a variety of heat processing applications.
REFRACTORY BRICK Refractory bricks refers to the brick whose Al2O3 contains from 30% to 80%, the contains of Al2O3 from 30% to 42% is call clay bricks, the contains of Al2O3 from 45% to 80% is call high alumina bricks. Typical Parameters Brief description Clay brick is refers to the Al2O3 content is 30% ~ 40% aluminum silicate. Clay brick is made of soft clay and 50% and 50% of hard clay grog, ingredients required by certain granularity, after forming, drying, burning under the high temperature of 1300 ~ 1400 .Clay brick belongs to the weak acid refractory products, can resist acid slag and the erosion of acid gases, the alkali resistance ability is a bit poor. Clay brick has good thermal shrinkage. High Alumina Brick selected calcined Bauxite and high quality combined clay as main raw materials. After shaped with brick machine above 600tons and fired at 1450-1470 °C , we can get this product. With high Al2O3 content, the product have good high temperature performance, so it is widely used in all kinds of industrial furnace and high temperature parts to prolong the life of furnace. Products advantage Clay Brick 1.Good acid stability 2.Good thermal performance 3.good thermal shrinkage 4.Good resistance to abrasion and corrosion High Alumina Brick 1. High refractoriness, High-temperature endurable. 2. Good corrosion resistance. 3. Good spalling resistance and wear resistance. 4. Good thermal shock resistance. 5. High mechanical strength. 6. High-temperature creep rate is low. 7. Good volume stability at high temperature. Typical Application Clay brick is suitable for secondary parts of coke oven, such as regenerator seal wall, small flue lining brick and regenerator checker brick lining brick, roof, door and rising pipe lining brick, etc.It is one of refractory brick used in blast furnaces, hot blast stove, heating furnace, power boiler, lime kiln, rotary kiln, ceramics. High alumina brick is mainly used for masonry in blast furnaces, hot air stoves, electric furnace roof, blast furnace and reverberatory furnace, rotary kiln lining. In addition, high alumina brick also widely used for open hearth regenerative checker brick, pouring system with plug head, gate brick, etc.
Refractory brick Refractory bricks refers to the brick whose al2o3 contains from 30% to 80%, the contains of al2o3 from 30% to 42% is call clay bricks, the contains of al2o3 from 45% to 80% is call high alumina bricks. Clay brick 1.Good acid stability 2.Good thermal performance 3.Good thermal shrinkage 4.Good resistance to abrasion and corrosion High alumina brick 1. High refractoriness, high-temperature endurable. 2. Good corrosion resistance. 3. Good spalling resistance and wear resistance. 4. Good thermal shock resistance. 5. High mechanical strength. 6. High-temperature creep rate is low. 7. Good volume stability at high temperature. Typical application Clay brick is suitable for secondary parts of coke oven, such as regenerator seal wall, small flue lining brick and regenerator checker brick lining brick, roof, door and rising pipe lining brick, etc.It is one of refractory brick used in blast furnaces, hot blast stove, heating furnace, power boiler, lime kiln, rotary kiln, ceramics. High alumina brick is mainly used for masonry in blast furnaces, hot air stoves, electric furnace roof, blast furnace and reverberatory furnace, rotary kiln lining. In addition, high alumina brick also widely used for open hearth regenerative checker brick, pouring system with plug head, gate brick, etc
Corundum brick and chrome corundum brick is the petrochemical industry gas furnace and the furnace key refractory lining material. Corundum brick is α-Al2O3 as the main component of the special refractory material, has been widely used in high temperature, high pressure, chemical erosion and mechanical wear serious ammonia gasification furnace, ethylene engineering gas furnace, carbon black reactor and other important petrochemical heat The lining of the device. Chromium corundum brick is pure Al2O3 and Cr2O3 as the main raw material synthesis, compared with pure corundum brick, it has better performance, such as refractoriness, load softening deformation temperature, bending strength, high temperature creep, high temperature volumetric stability And resistance to slag corrosion.
Corundum brick and chrome corundum brick is the petrochemical industry gas furnace and the furnace key refractory lining material. Corundum brick is α-Al2O3 as the main component of the special refractory material, has been widely used in high temperature, high pressure, chemical erosion and mechanical wear serious ammonia gasification furnace, ethylene engineering gas furnace, carbon black reactor and other important petrochemical heat The lining of the device. Chromium corundum brick is pure Al2O3 and Cr2O3 as the main raw material synthesis, compared with pure corundum brick, it has better performance, such as refractoriness, load softening deformation temperature, bending strength, high temperature creep, high temperature volumetric stability And resistance to slag corrosion.
Zircon brick is a high-technology material used for industrial applications because of superior mechanical, thermal, electrical, chemicaland optical properties. It is widely used in the high erosive zones of glass furnace, chemical industry, and metallurgy industry.
Magnesia Chrome brick is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stablity in high temperature. Application: Widely used for many industrial furnaces and kilns such as cement kilns,open-hearth furnace and melting furnace for nan-ferrous metals Physical properties 1.Low thermal conductivity 2.High refractoriness 3.High flexibility 4.Strong abrasion resistance 5.High chemical attack resistance 6.Outstanding coating friendly Items Index MgO,% 82 76 72 75 70 60 70 75 80 Cr2O3,% 8 8 8 12 12 12 9 6 4 SiO2,% 1.5 2.5 3 1.5 2.5 3.2 2.8 2.8 2.5 Apparent Porosity,% 17 18 19 17 18 19 19 18 18 Bulk Density,g/cm3 3 2.95 2.95 3.05 3 3 3 2.95 2.93 Cold Compressive Strength,Mpa 45 45 45 45 45 35 40 40 40 Refractoriness Under Load, ºC 1700 1700 1650 1700 1700 1580 1600 1600 1600 Thermal Shock Resistance,cycles(950 ºC,air cooling) 80 80 60 80 60 60 60 60 60 Thermal Conductivity,w/m.k(1000 ºC) 2.8 - - 2.8 - 2.8 2.8 2.9 - Thermal Expansion,%(1400 ºC) 1.5 - - 1.5 - 1.5 1.5 1.4 -
The cordierite brick contains cordierite material,it is a high-alumina refractory product. Made of high alumina raw materials, synthetic cordierite and binder. The thermal shock stability of the product is very good, can be used as ceramic kiln furniture, heat exchangers, catalyst for the purification of exhaust gas. Cordierite brick is a novel refractory material, it has a high refractoriness, good thermal shock resistance, high load softening temperature, small expansion coefficient, long life and other fine features, the company widely used in light industry ceramic industry (tunnel kiln Car, brick kiln, push plate kiln, push plate kiln, a variety of sagger) and other kilns, could replace the clay, high aluminum material.
Sillimanite brick based on pure sillimanite raw material, was produced by our unique forming and firing process, featured with â high temperature resistance, very lower porosity and excellent thermal shock resistance . -
Silica mullite brick is a special high-alumina bauxite and silicon carbide as raw materials, made by a special sintering process, with a strong high wear resistance, thermal shock stability characteristics, in the course of the formation of protective layer, and other characteristics. Mainly used for cement rotary kiln transition zone, decomposition zone. Feature: High refractoriness under load Highâ temperature resistance Lowâ thermal conductivity Good insulatingâ property High flexibility Proper bulk density -
Magnesium zirconium brick with high purity fused magnesia and synthetic magnesia zirconium as raw material, high pressure molding, high temperature firing, the microstructure, the main mineral phase for the magnesite, forsterite and oblique zircon, alkali metal , oxides and sulfides, etc. With excellent resistance to erosion, used in glass kiln regenerator lattice in the upper part of the body, no clogging and collapse phenomenon. Life of up to 8 years or more. -
Clay bricks for old building (pagoda, temple), house's yard or garden L*W*H(mm): 200*200*20 Weight (kg):1.6 Water repellent or Water absorption (%):5-7
High alumina bricks are commonly utilized in industries such as steelmaking, cement manufacturing, and non-ferrous metallurgy for lining furnaces, kilns, and other high-temperature equipment due to their excellent resistance to thermal shock, abrasion, and chemical corrosion.
Pure Handmade Red Bricks so it's solid. This is traditional method that last for centuries. No machine included in the process. Size : 230 mm x 100 mm x 6 mm. Material : Clay
Magnesia chrome bricks are made from high-grade magnesite clinker and chrome oxide. By high-pressure shaping and high-temperature firing, its characteristic is the high direct-bonding rate and big crystallite. It has good thermal spalling resistance. The lowâ??basic neutral nature gives itself good slag resistance when servicing lowâ??acid feed furnaces. Magnesia chrome bricks are a realistic lining material for refining furnaces, electric furnaces, glass melting furnaces and cement rotary kilns, etc. Applications: Used in the lining of furnaces and kilns in various industries such as steel, glass, cement, and petrochemical. Also used in the manufacturing of ceramics, non-ferrous metals, and other refractory materials. Can be used in the construction of high-temperature equipment such as heat exchangers, boilers, and incinerators. It finds its application in the field of nuclear power plants, aerospace, and defense as well.
Circle fireclay bricks are specialized fire bricks that are used to construct circular structures or lining in high-temperature environments. The circular shape of these bricks allows for smooth and continuous lining without the need for excessive cutting or fitting. This makes them more efficient to use in curved or circular structures, helping to ensure a reliable and durable construction in high-temperature environments. Applications of Circle Fireclay Bricks: Kilns: Circle fireclay bricks are commonly used to build the inner lining of kilns, which are used for firing ceramics, pottery, and other materials at high temperatures. Furnaces: In industrial settings, circle fireclay bricks are used to construct the interior of furnaces, which are used for melting metals or processing other heat-intensive materials. Chimneys: The circular shape of these bricks makes them ideal for constructing chimneys and flues, where they can withstand the high temperatures and corrosive byproducts of combustion. Forges: Circle fireclay bricks are also used in blacksmith forges, where they create a heat-resistant lining to contain the intense heat needed for metalworking. Pizza Ovens: In traditional pizza ovens, circle fireclay bricks are often used to line the cooking chamber, as they can endure the high temperatures required for baking pizzas.
Supplying stylish, beautiful and modern Iranian pottery, sending it to the UAE and Gulf countries at a reasonable price and quality level 1
The magnesia chrome brick is an alkaline refractory material with magnesium oxide content above 90%, with magnesite as the main crystalline phase. It has excellent properties such as high refractoriness, high-temperature strength, good thermal shock resistance, and strong resistance to alkaline slag erosion. Contact Yutong-magnesia chrome brick manufacturer to get the best price! The magnesia chrome brick is a kind of refractory material, which is made of magnesite and chrome concentrate as the main raw material, formed by high pressure and fired by high temperature. Heat-resistant temperature, the maximum allowable ambient temperature is 1700â??. It has high strength, high load refractoriness, high alkali erosion resistance and high thermal shock resistance under the loading condition of 1500~1650â??. It has the advantages of environmental protection and long service life. Magnesium-chromium refractory brick is made of high-quality magnesium oxide and chromium oxide, formed by high pressure and sintered by high temperature. It has the characteristics of a large crystal and a high direct bonding rate. The product also has good anti-cracking properties and good resistance to acid slag erosion and has low alkalinity. Finally, this refractory brick is an ideal brick lining material for off-furnace refineries, electric furnaces, glass kilns, smelting kilns and cement rotary kilns.