Refractory brick
Refractory bricks refers to the brick whose al2o3 contains from 30% to 80%, the contains of al2o3 from 30% to 42% is call clay bricks, the contains of al2o3 from 45% to 80% is call high alumina bricks.
Clay brick
1.Good acid stability
2.Good thermal performance
3.Good thermal shrinkage
4.Good resistance to abrasion and corrosion
High alumina brick
1. High refractoriness, high-temperature endurable.
2. Good corrosion resistance.
3. Good spalling resistance and wear resistance.
4. Good thermal shock resistance.
5. High mechanical strength.
6. High-temperature creep rate is low.
7. Good volume stability at high temperature.
Typical application
Clay brick is suitable for secondary parts of coke oven, such as regenerator seal wall, small flue lining brick and regenerator checker brick lining brick, roof, door and rising pipe lining brick, etc.It is one of refractory brick used in blast furnaces, hot blast stove, heating furnace, power boiler, lime kiln, rotary kiln, ceramics.
High alumina brick is mainly used for masonry in blast furnaces, hot air stoves, electric furnace roof, blast furnace and reverberatory furnace, rotary kiln lining. In addition, high alumina brick also widely used for open hearth regenerative checker brick, pouring system with plug head, gate brick, etc
Refractory Fire Brick
SK 36 Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes. Quality of Bricks: We offer various quality bricks are 50 to 55% Alumina offering high temperature resistance. Standard Sizes (MM): 230 x 115 x 75 MM 230 x 115 x 65 MM
SK 34 Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes. Quality of Bricks: We offer various quality bricks are 35 to 40% Alumina offering high temperature resistance. Standard Sizes (MM): 230 x 115 x 75 MM 230 x 115 x 65 MM
Insulation Bricks
Fire clay & High Alumina bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes. Quality of Bricks: We offer various quality bricks are IS-6, IS-8, PI - 30% to 90% Alumina offering high temperature resistance of 1100 C to 1700 C. Standard Sizes (inch): 9*4.5*3 / 9*4.5*2.5 / 9*4.5*2 / 9*4.5*1.5 / 9*4.5*1 Side Arch / Side Tapper, End Arch / End Tapper Sizes (inch) 9*4.5*3/2.75 9*4.5*3/2.50 9*4.5*3/2 9*4.5*3/1.5
Performance characteristics: wear resistance, corrosion resistance, peeling resistance, low creep, good thermal shock stability, service life is 1.5 times that of ordinary products; Main uses: Mainly used in blast furnaces, hot blast furnaces, carbon roasting furnaces, carbon calciners, coke ovens, steel barrels, casting systems, boilers, cement kilns, glass kilns and various kiln lining and thermal equipment, etc., suitable for metallurgy, machinery, building materials, casting, ceramics, electric power, petroleum, chemical and other industries. Standard size:230*115*65mm First-class high-alumina bricks Al2O3 75% second-class high-alumina bricks Al2O3 60%~75% third-class high-alumina bricks Al2O3 48%~60%
Shape Rectangular Material Refractory materials For Use in Floor Size (Inches) 9 In. X 4 In. X 3 In. Resistance Durability Fire Resistant
Shape : Hexagon Material ; Ceramic For Use : in Side Walls, Floor Size (Inches) ; 9 In. X 3 In. X 2 In. Resistance Durability : Fire Resistant Coverage Area (Sq. feet) : 2 Sq. feet
1. High temperature strength; 2. Resistant to corrosion in various atmospheres; 3. Excellent thermal shock stability; 4. Good thermal insulation; 5. The energy-saving effect is remarkable The operating temperature is below 1350C. Thermal insulation refractories are characterized by high porosity, generally 40%-85%; Low bulk density and low dry 1.5g/cm3: low thermal conductivity, generally less than 1.0W (m.K), it acts as the thermal insulation material of industrial kiln, can reduce the heat dissipation loss of the furnace, save energy, and can reduce the quality of the equipment under heat, the mechanical strength, wear resistance and slag erosion resistance of the thermal insulation refractory material is poor, and it is not suitable for the load-bearing structure of the kiln and direct contact with slag, charge, molten metal and other parts
