Modulation mode: GFSK/FSK Working frequency: 420.00í½450.30/860~875/910~925MHz Output power: 17dBm(50mW) Receiving sensitivity: -115 í½ -118dBm Channels: 8/16/32 Transmitting current: í_100mA Receiving current: í_30mA Sleeping current: í_20mA Interface rate: 1,200/2,400/4,800/9,600/19,200bps Interface mode: UART TTL, RS-232 and RS-485 Power supply: DC +3.3 to 5V Working temperature: -25íµ to 80íµ Working humidity: 10% to 90% Dimension: 47 x 26 x 10mm Reliable transmit distance (AT-4 antenna): 1,200m Communication mode: half-duplex Network topology: point to point and point to multi-point.
Modulation mode: GFSK/FSK Working frequency: 433/470MHz Output power: 17dBm(50mW) Receiving sensitivity: -118dBm@1,200bps Channels: 8/16/32 Transmitting current: 90í+5mA Receiving current: 28í+2mA Sleeping current: 5í+2uA Interface rate: 1,200/2,400/4,800/9,600/19,200bps Interface mode: UART TTL, RS-232 and RS-485 Power supply: DC +3.3 to 5V Working temperature: -25íµ to 75íµ Working humidity: 10% to 90% Dimension: 47 x 26 x 10mm Reliable transmit distance (AT-4 antenna): 1,200m@1,200bps with AT-4 antenna Communication mode: half-duplex Network topology: point to point and point to multi-point.
Transmission equipment, optic transceiver, optical module, amplifier, olp, obp, dispersion compensator , plc splitter, optic coupler, optic circulator, optical switch.
Optical fiber patch cord, optical connector, optical fiber cable, plastic optical fiber, media converter, SFP module, ODF, optical fiber attenuator, optical fiber adaptor, optical fiber coupler, ODF/enclosure, CAT5E cable, CAT6 cable, CAT3 cable, CAT7 cable.OEM
Fiber optic networks, electrical appliances including: fiber optic cable, optical transmitter/receiver, media converter, sfp & gbic transceiver, optical coupler, attenuator, filter, patchcord, pigtail, adaptor, optical closure, termination box, odf, fusion splicer, otdr, optical light source, optical power meter, optical fiber identifier, signal level meter, catv amplifier splitter & tap, coaxial cable, booster cable, glue gun, extension cord with plugs & sockets, power sockets and travel adaptors.
Stand alone Managed 10/100/1000Base-Tx to 10/100/1000Base-Fx Media Converter SUN Telecoms stand alone Ethernet Media Converter is offers a cost-effective product to transmit distances up to 120km (Single-mode fiber). It makes it easy to incorporate the advantages of fiber-based connection technology in a managed Ethernet/Fast Ethernet network. Integrated Auto Cross-over MDI/MDI-X and NWay capabilities make it simple to deploy within a network. Also, the í¦hot-swappableí¦ design is ideal for scaling the system up or down quickly. Features: Web, SNMP, Console management Hot-swappable module Available with ST, SC, or WDM Simplex SC single-fiber connectors Auto MDI/MDI-X on copper port Auto-negotiation on copper port LED status for Link/Activity, LFS, 100, Loopback, and Full Duplex/Collision Link-Fault Signaling illuminates to indicate link failure Link-Fault Signaling function can boot up redundant link if network is installed with primary and redundant link Local and remote loopback
Optical transceiver SFP, SFP, XFP, fiber optic media converter, optical fiber cable, optical fiber patch cord, fiber optic fast connector, fiber optic splitter, odf, optical fiber terminal box, optical fiber closure, fiber optic adapter.OEM, ODM
Features Compliant with sfp msa standard Compliant with ieee 802.3z 3.3v dc power supply 1310nm, fp ld, 1250mbps, 10km Difference lvpecl inputs and outputs Duplex lc connector Compliant with sff-8472 Hot pluggable Rohs compliant Applications Gigabit ethernet data link Data storage networks Other optical links Optical access network Remarks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Features: Hot pluggable xenpak form factor Xaui electrical interface: 4lanse@3.125gbit/s Below 2.2w power dissipation Sc-duplex optical receptacle Digital diagnostic monitor interface Very low emi and excellent esd protection Cooled 850nm vcsel laser and rosa Up to 300m for om3 fiber Operating temperature range 0ípc to 70ípc Standards: Xenpak msa compliant Ieee802.3ae-2002 compliant Gr-253-core compliant Rohs compliant Applications 10g base-sr/sw ethernet Marks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Features 10gb/s serial optical interface compliant to 802.3ae Uncooled 1310nm dfb transmitter and pin photodiode receiver Xfp mechanical interface with bail latch and hot pluggable Xfi high speed electrical interface 2-wire interface for management and digital diagnostic monitor Low power consumption, single +3.3v power supply Operatingcase temperature: 0 to 70 ípc All-metal housing for superior emi performance Advanced firmware allow customer system encryption information to be stored in transceiver Rohs compliant Remarks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Features Support 1000base-t operation in host systems with sgmii interface Up to 1.25gbps bi-direction data links Hot-pluggable sfp footprint Fully metallic enclosure for low emi Compact rj-45 connector assembly 100m transmission over unshielded twisted pair(utp) category 5 cable Temperature range 0 to 70ípc Rohs compliant Remarks: Compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Features Single lc/sc receptacle optical interface compliant Hot-pluggable sfp footprint 1490/1550nm distributed feed back laser transmitter Rohs compliant and lead free Up to 10~20 km on 9/125 Metal enclosure for lower emi Single 3.3v power supply Low power dissipation Commercial operating temperature range: 0ípc to 70ípc Applications 1.25gb/s 1000base-lx ethernet 1.06 gb/s fibre channel Marks: compatible with cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Features Compliant with sfp msa standard Compliant with ieee 802.3z 3.3v dc power supply 850nm, vcsel, 1250mbps, 550m Difference lvpecl inputs and outputs Duplex lc connector Compliant with sff-8472 Hot pluggable Rohs compliant Applications Gigabit ethernet data link Data storage networks Other optical links Optical access network Remarks: Compatible to cisco / hp / huawei / nortel / 3com/foundry/alcatel-lucent / extreme/d-link. 3 years warranty
Optical transceiver module.
Description XH-DSW-1X2 optical switch module is an optical path control device, has the role of controlling the optical path and converting the optical path; it can realize 2-channel optical signal input, select the signal output of one of the channels (support bi-directional use), the module supports key manual switching and RS-232 serial port command control. It has an important role in optical communication applications. Optical switch is mainly used in optical transmission systems for multiple optical monitoring, LAN multi-source / detector automatic switching, and optical sensing multi-point dynamic monitoring system optical test system for optical fiber, optical devices, network and field engineering optical cable testing; optical device installation and adjustment.
40G QSFP ER4 optical transceiver module, support 40Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.
Features: Supports 9.95 to 11.3Gb/s bit rates Hot-Pluggable Duplex LC connector 1550nm cooled EML transmitter, APD photo-detector SMF links up to 80km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply :+3.3V Power consumption
Features Supports 9.95 to 11.3Gb/s bit rates Hot-Pluggable Duplex LC connector 1550nm cooled EML transmitter, PIN photo-detector SMF links up to 40km 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface Power Supply :+3.3V Power consumption
40G QSFP+ SR4 100M MPO Optical Transceiver Product Model:EQ854X-3MCD01 Data Rate:40G Wavelength:850nm Distance:100m Connector:QSFP+ Fiber Type:MM DDM:Yes Place of origin: Made in China Shipping Port: ShenZhen Package type: 10PCS/Tray Features 1.High Channel Capacity: 40 Gbps per module 2.Up to 11.1Gbps Data rate per channel 3.Maximum link length of 100m links on OM3 multimode fiber Or 150m links on OM4 multimode fiber 4.High Reliability 850nm VCSEL technology 5.Electrically hot-pluggable 6.Digital diagnostic SFF-8436 compliant 7.Case operating temperature range:0 C to 70C 8.Power dissipation < 1.5 W Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
Product Model: EXBxxX-3LCD80 Data Rate: 10G Wavelength: 1490/1550nm Distance: 80KM Connector: LC Fiber Type: SM DDM: YES Product Origin: Made in China Shipping Port: ShenZhen Lead Time Please Contact The Sales Confirmation