Shen Zhen NXD Optical Communication Equipment Co., Ltd.

Cable type G.652d/g657a, pvc, lszh, simplex or duplex, 0.9, 2.0, 3.0mm Fiber type Smf-28e, sm 9/125um, mm 50&62.5/125um Polish method Upc, pc, spc, apc Connector Fc, sc, lc, st, e2000, din, d4, sma, fddi, mpo/mtp Insertion loss 0.1db (for single mode master) 0.25db (for single mode standard) 0.25db (for multimode) Return loss (for single mode) Upc 50db Spc 55db Apc 60db (typ.65db) Repeatability ¡¨¤0.1db Operating temperature -40 c to 85 ¡ãc Geometry requirement (for single mode) Ferrule end face radius7mm r 12mm (for apc) 10mm r 25mm (for standard) Apex offset 30 |¨¬m (for master) Apex offset 50 |¨¬m (for standard) Undercut -50nm u 50nm 1pc/plastic bag, 1500pcs/carton box

This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members. Features & Application òExcellent optical, mechanical & environmental performance òHigh strength-to-weight ratio òCSM dielectric type û Fiber Reinforced Plastic òDry block construction òHigh tensile strength òHigh crush strength òCorrosion resistance òKINK resistance òVery light weight òVery flexible & small bending radius òLong haul / backbone application òJunction communication systems òAll dielectric applications òCATV applications. Construction Parameters Fiber Count 02 û 144 Fibers Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Second (Outer) Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.

This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type û fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction Parameters Fiber Count As per CustomerÆs Requirement No. of Loose Tube As per CustomerÆs Requirement G.655 As per CustomerÆs Requirement G.652 As per CustomerÆs Requirement Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP) Armoring Corrugated Steel Tape Armoring Peripheral Strength Member (if required) Aramid / Glass Yarn Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Outer Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.

Product description This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings. Features & application Excellent optical, mechanical & environmental performance Csm dielectric type û fiber reinforced plastic High tensile strength High crush strength Aerial application Application in lan, wan, especially in ftth networks Easy to clamp and install Can bear ice loads and high wind pressures. Construction Parameters Fiber Count 02 to 12 Fiber Fiber Type G.652.D Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm Nominal Cable Delivery Length (km) 2 KM + 3% . Mechanical Characteristics Tensile Strength (N) 600 Tensile Strength (N) (Installation) 1000 Crush Strength (N) 2,000 Minimum Bending Radius (mm) 75 Temperature Operating Range -10 to +70¦C.

Product Characteristic >Material selection of high quality cold-rolled steel sheet, electrostatic spray surface, stylish, sturdy, easy to use >Inside the cable fixtures, splice and clamps >Fully enclosed, protecting >Suitable for outdoor armored, indoor soft cable >Standard cell size, 19 inches in width, can be mounted both distribution frame cabinet/rack can also be used with equipment rack >Structure the use of thicker passivation of galvanized cold rolled steel plate or surface coating technology, adapter works with the original Japan import ceramics core, guarantees excellent mechanical and optical properties >Combines the advantages of the optical fiber distribution box, also available as cable terminal box; can be individually assembled into optical fiber distribution frame, also available with digital distribution units, audio accessories, bunding in a cabinet/rack which constitute an integrated distribution frame >Flexibe configuration, installation and simple to use, easy to maintain, easy to manage, it is essential for line fiber/jumper fiber/splice fibr/optical fiber of the small and medium size communication room.  communication engine room, jumping fiber, cable and splice one access the essential equipment Technical parameters >Several coupled interfaces >Compact Optical is used for fiber splice, optical adjustment, cable protection and so on >The height 1U is suitable for Cabinet or rack >Conform to ISO/IEC11801 standards -

Please quote for the following wholesale product requirement - Product Name: Optical Fiber Cables Specifications: Type: Optical Fiber (POF), Transparent Glass Or Plastic Fibers Voltage: Low & Medium Material: Plastic Fiber, Rubber Use: Industrial, Construction Size: Customized Packaging Terms : Standard

our company has engaged in fiber communication products for 15 years, our main products are optical cable and FTTx system products,including Outdoor Fiber Optical Cable,Indoor Fiber Optical Cable,Data Cable,Municipal Telephone Cable,etc. For the individual or enterprise who has the requirement for setting up the optical cable factory or communication product assembly factory, we will provide service of factory planing and designing, production line installation and commissioning, product design and testing , production process control and technic support. We supply all the raw materials too. KINGFIBER is devoted to build a win-win relationship with our partner. If you have any requirements in fiber communication products, please contact me at any time,and I will provide you more details with catalogue.Thank you. Best regards, Andy Ma Vice General Manager Henan Kingfiber Industry Co.,Ltd

Optical Fiber Cable : We carry brand names such as Asahi/Lucina and Showa Electric Wire Cable