A unique design of the pre-furnace consists of lateral wall made of finned tube connected to the boiler body through headers. Salient Features: Complete gas-tight construction. Greater absorption of radiant heat. Fast water circulation resulting in accelerated start up and better boiler response to load fluctuations. Designed to give full load efficiency upto 80%. Optional FBC System for Capacity above 5000 kg./hr. for Automatic Firing. Capacity:1000 kg./hr. to 15000 kg./hr. Pressure:10kg./cm2 to 35 kg./cm2 Fuel:Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust / Bagasse / Palm Oil Extracts / etc.
ZJN environment protection technology company manufactures industry-specific heavy-duty low-consumption rotary drum dryers widely used to dry,calcine,mill, grind, granulate, coat, de-volume and de-toxin wood chips(for bio-fuel), sawdust, sand, fertilizer, chemicals, kitchen leftovers, paper making pulp, animal feed, sludges in electroplating, leather, textile,printing and dyeing, coal mining and pharmaceutics,brewing, starch processing, biological fermentation, sewage, and hazardous metals, sweet potato residue, vinasse, bean dregs, medicine dregs, coal slime, lignite and others.
The steel body pdc drill bit with 5blades and 19mm cutters is suitable for soft, medium formation, such as clay, marl, lignite, sands, silt, anhydrite, etc. Balanced force design allows the bits suitable for down-hole motor application used in directional drilling with little radial vibration. The reasonable layout of patented pdc cutters in various structures at different locations endows the bits with strong aggressiveness and anti-abrasiveness. Strong aggressiveness allows the bits high rop. The simulation technology of dynamic flow field are used in hydraulic design to optimize down-hole flow field, beneficial to improve clearance speed and anti-balling simultaneously.
The matrix body pdc drill bit with 5blades and 19mm cutters is suitable for soft, medium formation, such as clay, marl, lignite, sands, silt, anhydrite, etc. Balanced force design allows the bits suitable for down-hole motor application used in directional drilling with little radial vibration. The reasonable layout of patented pdc cutters in various structures at different locations endows the bits with strong aggressiveness and anti-abrasiveness. Strong aggressiveness allows the bits high rop. The simulation technology of dynamic flow field are used in hydraulic design to optimize down-hole flow field, beneficial to improve clearance speed and anti-balling simultaneously.
The matrix body pdc drill bit with 5blades and 19mm cutters is suitable for soft, medium formation, such as clay, marl, lignite, sands, silt, anhydrite, etc. Balanced force design allows the bits suitable for down-hole motor application used in directional drilling with little radial vibration. The reasonable layout of patented pdc cutters in various structures at different locations endows the bits with strong aggressiveness and anti-abrasiveness. Strong aggressiveness allows the bits high rop. The simulation technology of dynamic flow field are used in hydraulic design to optimize down-hole flow field, beneficial to improve clearance speed and anti-balling simultaneously.
we can offer you Ball Clay. Ball clays are kaolinitic sedimentary clays that commonly consist of 20-80% kaolinite, 10-25% mica, 6-65% quartz. Localized seams in the same deposit have variations in composition, including the quantity of the major minerals, accessory minerals and carbonaceous materials such as lignite. They are fine-grained and plastic in nature, and, unlike most earthenware clays, produce a fine quality white-coloured pottery body when fired, which is the key to their popularity with potters. Ball clays are relatively scarce deposits due to the combination of geological factors needed for their formation and preservation. They are mined in parts of the Eastern United States and from three sites in Devon and Dorset in South West England. They are commonly used in the construction of many ceramic articles, where their primary role, apart from their white colour, is to either to impart plasticity or to aid rheological stability during the shaping processes.
Fully Automatioc Coil Type Boiler Fully automatic, instant steam generating range of boilers designed for safe and reliable operations. Easy to install and commission, these time-tested boilers require very little maintenance. It features a specially designed furnace and combustion system to burn difficult heavy oils and offers fuel flexibility between light and heavy oils to help respond to fluctuating fuel prices. Salient Features: High Efficiency. Large Steam & Water Volumes. Less Maintenance Unique patented membrane design Built-in heat recovery device Membrane design allows large tube diameter for coil enabling better steam dryness, less frequent de-scaling, longer coil life and minimum downtime Unique economiser - optimiser design ensures maximum heat recovery without possibility of feed water pump failure due to boiling/ vapour causing cavitations and pump failure Unique circulation burner design prevents leakage and eliminates fire hazard Ceramic wool refractory allows fast cooling of top plate and easy maintenance Easy access to all parts requiring maintenance. Capacity:500 kg./hr. to 850 kg./hr. Pressure:10 kg/cm2 to 20kg/cm2 Fuel:Coal / Wood / Lignite / Petcock
Coconut shell activated carbon using high-quality coconut shell as raw material, carbonization, activation, and post-processing technology from refining. Appearance is black, granular. Products are: Developed pore structure, adsorption rate, adsorption cycle is short, Low impurity content, surface cleanliness, high abrasion resistance, Rounded edges and corners, uniform size, repeated regeneration characteristics of use. Quality coconut shell activated carbon - new materials Coconut shell activated carbon can be made of many kinds of carbon-containing substances, these materials include wood, sawdust, coal, coke, peat, lignin, stone, hard shell, sugar pulp, bone, lignite, petroleum residues and the like. Including coal and coconut shell activated carbon has become the most commonly used raw Youdou. High-quality coconut shell activated carbon - Production Process Activated carbon manufacturing process is basically divided into two: The first process involves dehydration and carbonization, the raw material is heated at a temperature of 170 Zhi 600 drying, the original organic matter charring about 80%.
Sulfonated asphalt, resinated lignite, sulfonated phenol-formaldehyde resin, organic lignite, cementing HTHP filtrate loss reducer, cementing defoamers, oil well cement fluid loss additive, organic lignite.
Polyurethane Flip-Flop Screen Mesh Polyurethane Flip-Flop Screen Mesh have been in operation for decades for screening of moist or humid materials. Made from highly resilient polyurethane elastomer, these filp flow mats withstand deformation without loss of elasticity or dimensional accuracy. They are designed both for bolting and clamping systems, so to fit all screen decks worldwide with no distinction depending on machine brand, deck dimensions and installation characteristics. Panel size: Length & Width & Thickness are custom designed Aperture size: 2~32mm Aperture shape: Square, Rectangle, Slot, Circular Polyurethane Flip Flop Screen Mats offered make use of quality elastomers that guarantees highest performance support as demanded by the customers. Being used for applications involving screening moist or humid materials, these are also suitable for screening of products material like wood chips, building rubble, plastic and others and can also be custom developed as specified by the customers. These are suitable for screening of moist or humid materials like Iron ore at 6mm with 15% moisture, Raw sand at 3mm with 6% moisture, Compost at 10mm with 50% moisture, Slag at 3mm with 10% moisture and others. Usage Applications: Iron ore at 6mm with 15% moisture Raw sand at 3mm with 6% moisture Compost at 10mm with 50% moisture Slag at 3mm with 10% moisture Salt at 3 mm with 5 % moisture Coke at 3mm with 20% moisture Lignite at 6mm with 50% moisture Coal at 6mm with 18% moisture Limestone at 3mm with 20% moisture Pet coke at 3mm with 18% moisture Plus other hard to screen materials like Wood Chips, Bamboo Chips, Washery Waste, Building Rubble, Soil, Plastic, Auto Parts etc.
ZJN environment protection technology company manufactures industry-specific heavy-duty low-consumption dryers widely used to dry,calcine,mill, grind, granulate, coat, de-volume and de-toxin wood chips(for bio-fuel), sawdust, sand, fertilizer, chemicals, kitchen leftovers, paper making pulp, animal feed, sludge in electroplating, leather, textile,printing and dyeing, coal mining and pharmaceutics,brewing, starch processing, biological fermentation, sewage, and hazardous metals, sweet potato residue, vinasse, bean dregs, medicine dregs, coal slime, lignite and others. More than 30 years' experience. 2. We are the leading professional supplier of drying equipments and service for drying equipment industry. 3. All products achieved ISO9001:2008 quality management certificate and EU CE certificate. Quality First, First Rate Service: strict quality control always, highly-trained personnel for all-round aftersales service.Three Guarantees policy for all our products.Our state-of-the-art design and strict quality control ensure reliable product quality. Advantage of Rotary Dryer (1). High production capacity (2). Lower consumption and operation cost (3) . Capable to dry different kinds of product (4) . Stable operation (5) . Uniform dried product (6). Both dryer and calciner, operation Temp. Up to 1000°C (7 ). Heat source can be steam, electricity, coal, natural gas etc. Techs details:This drum dryer can pelletize your sludges or dry them into cakes, briquettes. Since chemical sludge components are very complex, it is very harmful to landfill. It must be dried before further treatment. Due to its complicated contents, it is very hard to dry. This rotary drum dryer is specifically designed for such sticky chemical sludge. According different viscousity and moisture contents, it can use double-helix or triple-helix rotary harrows to make sludge fully contact with hot air and get it flash-dried in surface, which efficiently prevents sludge cling to the dryer. In the first cylinder, the sludge water evaporation is faster, so the hot air temperature dropped sharply. To avoid the water being absorbed again, the waste hot air and evaporation will be discharged directly in the end. There are special guiding and lifting boards, which makes dry sludge transfer faster, wet sludge slower. Through the way, sludge will be dried evenly as requirement and dont need to be re-dried like traditional drying equipment. So, inquire for details, try and buy.
ZJN environment protection technology company manufactures industry-specific heavy-duty low-consumption dryers widely used to dry,calcine,mill, grind, granulate, coat, de-volume and de-toxin wood chips(for bio-fuel), sawdust, sand, fertilizer, chemicals, kitchen leftovers, paper making pulp, animal feed, sludge in electroplating, leather, textile,printing and dyeing, coal mining and pharmaceutics,brewing, starch processing, biological fermentation, sewage, and hazardous metals, sweet potato residue, vinasse, bean dregs, medicine dregs, coal slime, lignite and others. More than 30 years' experience. 2. We are the leading professional supplier of drying equipments and service for drying equipment industry. 3. All products achieved ISO9001:2008 quality management certificate and EU CE certificate. Quality First, First Rate Service: strict quality control always, highly-trained personnel for all-round aftersales service.Three Guarantees policy for all our products.Our state-of-the-art design and strict quality control ensure reliable product quality. Advantage of Rotary Dryer (1). High production capacity (2). Lower consumption and operation cost (3) . Capable to dry different kinds of product (4) . Stable operation (5) . Uniform dried product (6). Both dryer and calciner, operation Temp. Up to 1000°C (7 ). Heat source can be steam, electricity, coal, natural gas etc. Techs details: Coal Slime is of high moisture, high viscosity, high water holding capacity, high ash content, and low calorific value. The coal slime value can only be fully tapped out when it is dried. It has increasingly exposed a lot of drawbacks in using ordinary drum dryer to dry coal slime. So the drying technology should be greatly developed to overcome these adverse characteristics. ZJN eventually developed a multi-loop hot air drum drying system specially for coal slime. It's highly efficient and energy-saving, reducing your time of waiting and power consuption when turning your slime into marketble goods. So do contact for a robust, high-quality machine to ramp up your revenue in billions.
The use of YGM high pressure suspension grinding mill: YGM high pressure suspension grinding mill is mainly used to grind mineral materials in metallurgy, building materials, chemical, mining and so on. It is specializing in producing fine powder of non-inflammable, non-explosive with Mohs hardness under seven, humidity in 6%, such as Quartz, long stone, calcite, talc, barite, fluorite, rare earth, marble, ceramic, aluminum vanadium soil, manganese mine, iron ore, copper mine, phosphorus ore, iron oxide red, zirconium British sand, slag, water slag, cement clinker, activated carbon, dolomite, granite, pomegranate zishi, iron oxide yellow, bean cake, fertilizer, compound fertilizer, fly ash, bituminous coal, coking coal, lignite, dangling beauty sand, oxidation chromium green, gold, red mud, clay, kaolin, Coke, coal gangue, China clay, blue spar , Fluorspar, bentonite, maifan rock rhyolite, pyrophyllite, purple sandstone, shale, green muddy rocks, Diego rock, basaltic stone, plaster, graphite and silicon carbide etc. Technical features of YGM high pressure suspension grinding mill: 1. High-efficiency: the full use of the jet-flow and optimized impeller structure can greatly improve the crushing and grading efficiency, thus greatly improving the production. 2. High grading degree: with the frequency conversion and grading adjustment technology, the YGM high pressure suspension grinding mill have stable and complete grading system and the special sealing measure ,which can efficiently prevent the leaking of the fine particles .And the particle size can reach 5006000monyh and the thinnest can reach 12000monyh. 3. Low wearing: the crushing wearing parts and the impeller of the Raymond mill mainly adopts German technology. And with the optimized design of the inner cavity structure and anti-abrasion and allergy materials, the YGM high pressure suspension grinding mill has made the lowest wearing parts and the highest purity. YGM high pressure suspension grinding mill working principle: Firstly, raw material is crushed by jaw crusher to the size required, and then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder evenly and continuously into the grinding chamber for powder-processing. The rollers of Raymond mill oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind. After this, the ground stuff is carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The airflow system is closely sealed up and circulated under condition of negative and positive pressure.
Warranty : 1 year After-sales Service Provided : Engineers available to service machinery overseas Colour : Customized Noise Grade : Low noise Capacity : 5T per hr dry solids Quantity Available per month: 3 Units Shipping Terms : CIF, FOB Destination Port : US, GB, Australia, Japan, India Payment Terms : L/C,D/A,D/P,T/T,Western Union Abot us: ZJN environment protection technology company manufactures industry-specific heavy-duty low-consumption drum dryers widely used to dry,calcine,mill, grind, granulate, coat, de-volume and de-toxin wood chips(for bio-fuel), sawdust, sand, fertilizer, chemicals, kitchen leftovers, paper making pulp, animal feed, sludge in electroplating, leather, textile,printing and dyeing, coal mining and pharmaceutics,brewing, starch processing, biological fermentation, sewage, and hazardous metals, sweet potato residue, vinasse, bean dregs, medicine dregs, coal slime, lignite and others. 1.More than 30 years' experience. 2. We are the leading professional supplier of drying equipments and service for drying equipment industry. 3. All products achieved ISO9001:2008 quality management certificate and EU CE certificate. Quality First, First Rate Service: strict quality control always, highly-trained personnel for all-round aftersales service.Three Guarantees policy for all our products.Our state-of-the-art design and strict quality control ensure reliable product quality. Advantage of Rotary Dryer (1). High production capacity (2). Lower consumption and operation cost (3) . Capable to dry different kinds of product (4) . Stable operation (5) . Uniform dried product (6). Both dryer and calciner, operation Temp. Up to 1000°C (7 ). Heat source can be steam, electricity, coal, natural gas etc. Techs details:This drum dryer can pelletize your sludges or dry them into cakes, briquettes. Since chemical sludge components are very complex, it is very harmful to landfill. It must be dried before further treatment. Due to its complicated contents, it is very hard to dry. This rotary drum dryer is specifically designed for such sticky chemical sludge. According different viscousity and moisture contents, it can use double-helix or triple-helix rotary harrows to make sludge fully contact with hot air and get it flash-dried in surface, which efficiently prevents sludge cling to the dryer. In the first cylinder, the sludge water evaporation is faster, so the hot air temperature dropped sharply. To avoid the water being absorbed again, the waste hot air and evaporation will be discharged directly in the end. There are special guiding and lifting boards, which makes dry sludge transfer faster, wet sludge slower. Through the way, sludge will be dried evenly as requirement and dont need to be re-dried like traditional drying equipment. So, inquire for details, try and buy.
Bauxite, gypsum, sand tone, bentonite, china clay, silica sand, lignite, limestone, fly ash.
We can supply Energy coal from different origin in large volumes. Different quality, no lignite. Please submit inquiry with required parameters.
For candle, crayon, match, board, packaging, eva based hot melt adhesive, wax blending, ect. Manufacture:petrochina fushun Brand:kunlun Oil content%:max.0.5 Melting point:56-58deg.C Packing:50kg per bag/25kg per carton, 20.5mt by 1*20fcl Payment: TT or L/C
For candle, crayon, match, board, packaging, eva based hot melt adhesive, wax blending, ect. Manufacture:petrochina fushun Brand:kunlun Oil content%:max0.5 Melting point:58-60deg.C Packing:50kg per bag/25kg per carton, 20.5mt by 1*20fcl Payment: TT or L/C
For candle, crayon, match, board, packaging, eva based hot melt adhesive, wax blending, ect. Manufacture:Petrochina Daqing Brand:Kunlun Oil content%:Max.2 Melting point:58-60deg.C Packing:50kg per bag, 20.5MT by 1*20FCL Payment: TT or L/C
For candle, crayon, match, board, packaging, eva based hot melt adhesive, wax blending, ect. Manufacture:Petrochina Dalian Brand:Kunlun Oil content%:Max.0.5 Melting point:58-60Deg.C Packing:25kg per carton or woven bag, 20.5MT by 1*20FCL Payment: TT or L/C