The matrix body pdc drill bit with 5blades and 19mm cutters is suitable for soft, medium formation, such as clay, marl, lignite, sands, silt, anhydrite, etc.
Balanced force design allows the bits suitable for down-hole motor application used in directional drilling with little radial vibration.
The reasonable layout of patented pdc cutters in various structures at different locations endows the bits with strong aggressiveness and anti-abrasiveness.
Strong aggressiveness allows the bits high rop.
The simulation technology of dynamic flow field are used in hydraulic design to optimize down-hole flow field, beneficial to improve clearance speed and anti-balling simultaneously.
Supplier: Rice, corn, sugar, wheat, cement, aluminum ingots, copper scrap , used rail and hms 1&2, urea, sulphur, cooking oils, petroleum products, aviation fuel, mazut, millet, alfalfa grass, timber logs, teak wood, wood pallet
Buyer: Steel scrap, used rails, cement
TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL (1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan 1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along with their Tank Storage Agreement "TSA". 2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial invoice to the seller along with an Acceptance Letter of the sales and purchase procedure. 3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all parties only if buyer's TSA is engaged, not active or cannot be verified with the local port authority). 4. Seller issues all POP documents below to the buyer upon a successful verification and approval of the buyer TSA or after receiving the TTIA fully signed by all parties: a. Injection Report. b. Product Passport. c. 24 Hours SGS Report. d. Product Certificate of Origin. e. Tank Storage Receipt (TSR). f. Authorization to sell and collect. g. Unconditional Dip-Test Authorization. h. Product Title Holder Transfer Agreement. i. NCNDA/IMFPA. 5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense. 6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by buyer storage facility and then injects the product into buyer's tanks. 7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder & Ownership of the product to the Buyer. 8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to Buyer for processing. 9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts according to the signed NCNDA/IMFPA.
Available stock in Rotterdam tank farm for jet fuel A1: CI DIP AND PAY FOB PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include Tank Storage Receipt (TSR) Certificate of origin Statement of Product Availability, Authorization to Verify (ATV), and Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).
The matrix body pdc drill bit with 5blades and 19mm cutters is suitable for soft, medium formation, such as clay, marl, lignite, sands, silt, anhydrite, etc. Balanced force design allows the bits suitable for down-hole motor application used in directional drilling with little radial vibration. The reasonable layout of patented pdc cutters in various structures at different locations endows the bits with strong aggressiveness and anti-abrasiveness. Strong aggressiveness allows the bits high rop. The simulation technology of dynamic flow field are used in hydraulic design to optimize down-hole flow field, beneficial to improve clearance speed and anti-balling simultaneously.
Supplier: Petroleum products like en 590 grade 10 ppm, jet fuel a1 grade, lsdo, fuels for automobiles, fertilizers like urea 46, npk, all types of phosphates, potassium and nitrogen. iron ore hematite and magnatite grades 62%, 65.5%, 68% and 72% fe grades in fines and lumps. hms scrap 1&2; rail scrap r 50 r 65 grades.
Supplier: 4cst, 6cst, 8cst, etro4, etro6, naphthenic base oil, equinas 4 group 3 base oil, equinas 6 group 3 base oil, equinas 8 group 3 base oil, equinas tfo 60i high quality inhibited transformer oil, equinas tfo 60u high quality un inhibited transformer oil, drilling fluid, melamine powder, clinker, urea, chemicals, base oils and other petroleum products, industrial salt
Services: Marine transportation and logistics
marine ship and cargo survey and inspections
Product Description - Mazut is a commercial grade oil Price of product ( USD price or FOB price) - UNFOURTUNALLY OUR NEXT ALLOCATION FOR MAZUT M 100 IS POSSIBALY NEXT MONTH Product origin - Russia Key Specifications/Special Features - Mazut M - 100 is a heavy oil which is used in large boiler's for its high energy content Minimum Order Size and Packaging details - "First initial trial shipment of 10,000 MT, followed by a 12 month contract, with monthly shipments between 25,000 to 100,000 MT per month. SORRY, NO SPOT CONTRACTS ACCEPTED "
Supplier: Petroleum products, crude oil rebco, espo, diesel en 590, jet a 1, pet coke, bitumen, coal , urea 46, fertilizers
Supplier: Soda ash light / dense 99.2%
sodium bicarbonate
caustic soda flakes 99%
sodium sulphate anhydrous (ssa) 99%
sodium sulphite flakes (ssf) 60%
sodium metabisulphate
hydrogen peroxide (h2o2) 50%
formic acid 85%
glacial acetic acid
paraffin wax
liquid paraffin (white oil) lp 100
menthol crystal
fumed silica
deg (di ethylene glycol)
mono ethylene glycol (meg)
poly ethylene glycol (peg),
base oil 150n, bs 150, 600n
bitumen 60/70
rpo (rubber process oil)
lioh (lithium hydroxide)
hco (hydrogenated castor oil)
12 hsa (hydroxy stearic acid)
ferrous sulphate heptahydrate
additive for lubricating oil
aromatic chemicals
Services: Exporting of chemicals & other products
