The matrix body pdc drill bit with 5blades and 19mm cutters is suitable for soft, medium formation, such as clay, marl, lignite, sands, silt, anhydrite, etc.
Balanced force design allows the bits suitable for down-hole motor application used in directional drilling with little radial vibration.
The reasonable layout of patented pdc cutters in various structures at different locations endows the bits with strong aggressiveness and anti-abrasiveness.
Strong aggressiveness allows the bits high rop.
The simulation technology of dynamic flow field are used in hydraulic design to optimize down-hole flow field, beneficial to improve clearance speed and anti-balling simultaneously.
Supplier: Rice, corn, sugar, wheat, cement, aluminum ingots, copper scrap , used rail and hms 1&2, urea, sulphur, cooking oils, petroleum products, aviation fuel, mazut, millet, alfalfa grass, timber logs, teak wood, wood pallet
Buyer: Steel scrap, used rails, cement
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Technical Data Sheet Property Average Value Gravity@15.6oc : 0.859 Max SPI: 33.45 Sulphur: 1.2-1.5 Max Water & Sediment Content: 0.2 Max Water Content: 0.1 Max Salt Content: 8 Max Carbon Residue: 4 Max Reid Vapour Pressure: 0 Pour Point: 0.35 Ash: 0 Asphalt : 1 Max ASTM Stabilized Gravity: Degree 3.7 Recovery @50oc: 0.8 Min @100oc: 8 @200oc: 28 @250oc: 37 @300oc: 47 Total Distillate: 47 Total Residue: 2.5Max
Greetings, my name is Sandra Moses-Adams, Owner of Moses Enterprise, a Sourcing Agency located in the USA. I am currently working with a Fuel Supplier located in the USA, if your Buyer is looking for EN590, A1Jet Sour Crude or JP-54 Fuel our Sellers are vetted and ready to supply your requirements. I have added 1 SOP & pricing below for you to review, but we have others. If you would like to discuss your request with the Seller Mandate, please reply with your LOI and I will open a WhatsApp group for you to engage. If the call is to both satisfactions, then the SM will arrange a Zoom call with the Seller to discuss your requirements. TRANSACTION PROCEDURES FOB TANK TO TANK 1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery. 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice alongside buyer tank storage agreement (TSA) for verification. 3. Seller provide buyer with the below listed PPOP. Product Passport (product analysis report) Irrevocable Commitment Letter to Supplier Tank Storage Receipt (TSR) Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm. 4. Seller provides buyer with SGS report, Injection Report, unconditional DTA. 5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage receipt (TSR) seller proceed for Tank-to-Tank injection and provide the buyer with the injection report of the product into buyer tanks. 6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. 8. TARGET PRICE: EN590 / $650MT
Kazakhstan origin aviation fuel, Jet Fuel A1 direct from Kazakhstan refinery available. Tank to tank transaction in Rotterdam port or Houston port. Minimum order quantity is 1 million barrels. Very competitive price offer by refinery
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
we can offer 1 or 2 million barrels ready for lift and make tank to vessel and dip and pay jet fuel A 1 middle east origin (not Iran) fob Houston subject prior sale first come first serve price usd 100 -95 per barrel FOB regards
we have offers for jet fuel A1 and diesel EN 590 fob Rotterdam tank to tank at very competitive prices for 1 or 2 million bbls A1 and 100.000- 200.000 tons EN590 buyers need to send ICPO and corporate profile together with TSA verifiable in Rotterdan once quotation approved Once CI are signed by both parties seller send PPOP and will; ask for buyer tank farm DTA signing to be sure buyer has tank space for inyection TSR will only be requested after fresh SGS delivered by the sellers
hello we can offer 2 million barrels trial and 4 million barrels per month x 12 Jet fuel A1 Usa origin refinery fob Houston can be tank to tank or tank to vessel need LOI and POF to send SCO and procedures
