SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it is suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40% to +20% of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 300-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, TV, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
Some possible health benefits and traditional uses of Raw Freeze Dried Blueberry Powder may include: Possibly promotes antioxidant activity May support the body's ability to deal with macular degeneration Possibly helps to relieve diarrhea and constipation May support healthy heart function One of the few sources of ellagic acid May support healthy lipid levels May support the neutralization of free radicals that affect disease and aging May support healthy memory and brain function May support healthy digestion due to fiber content May support urinary tract health May support eye health and vision Micronutrients of Blueberries include: Minerals: Calcium, Iron, Magnesium, Phosphorus, Potassium, Zinc, Copper, Manganese, Selenium Vitamins: Vitamin C, Thiamin, Riboflavin, Niacin, Pantothenic Acid, Vitamin B-6, Folate, Choline, Betaine, Vitamin A (RAE), Beta carotene, Vitamin A (IU), Lutein & Zeaxanthin, Vitamin E, Beta Tocopherol, Gamma Tocopherol, Delta Tocopherol, Vitamin K Amino Acids: Tryptophan, Threonine, Isoleucine, Leucine,. Lysine, Methionine, Cystine, Phenylalanine, Tyrosine, Valine, Arginine, Histidine, Alanine, Aspartic Acid, Glutamic Acid, Proline, Serine Anthocyanidins: Petunidin, Delphinidin, Malvidin, Peonidin, Cyanidin Flavan-3-ols: Catechin, Epigallocatechin, Epicatechin, Gallocatechin Flavones: Luteolin Flavonols: Kaempferol, Myricetin, Quercetin Proanthocyanidins: Proanthocyanidin Monomers, Proanthocyanidin Dimers, Proanthocyanidin Trimers, Proanthocyanidin 4-6mers, Proanthocyanidin 7-10mers, Proanthocyanidin (>10mers) This product is 100% natural and minimally processed: Taste, smell, texture, and color may vary from batch to batch. Please Note: This raw powder naturally tends to clump. If clumping occurs, lay the bag on a flat surface and place a towel over the bag. Then pound on the bag until the clumps break up. The towel will help protect the bag from damage. Suggested Use: Mix 1 tablespoon with juice, yogurt, or add to your favorite smoothie or recipes.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Ginger is an agricultural commodity which Thailand has the production potential. Mature ginger means rhizome of the harvested ginger at the age between 10-12 months after planting. Underneath the skin, the flesh is firm, fibrous, and ranges in color from yellow to brown. The rhizome is also highly fragrant with a warm, woody scent. When fresh, Ginger is juicy and crunchy with a pungent, spicy, and slightly sweet taste. Frozen Ginger can be kept up to 24 months from manufactured date under good condition.
PRODUCT INFO Avocado fruits are becoming more popular in Thailand. Apart from being consumed as fresh fruits for their palatability, food value with high protein, vitamin E and digestible fat content, their oil is used also in the cosmetic industry. USE Their rather neutral flavour profile allows the avocados to be paired with almost any ingredient and menu, both sweet and savoury. One of the proudly presented was ripe avocado chunks served with the refreshing coconut ice cream, with optional extra Japanese red bean topping. Season July marks the opening of the avocado season in Thailand and the best time of the year.
Iv cannulas, syringes, infusion set, rapid malaria test, rapid typhoid test, bp machine, thermometer, latex foley catheter, surgical gown, ppe kit, latex gloves, vaucum drying oven, fume hood (ms/ss), ducted pp fume hood, biological safety cabinet(as per class 2nd), air shower, pass box, bod incubator, incubator shaker, mini dry bath incubator, electronic burette, co2 incubator, seed germinator refrigerated, ceramic magnetic stirrer hot plate, ultrasonic cleaner, autoclave vertical/horizontal, ice flake machine, tube furnace, elisa reader/microplate reader, microplate washer, ultrasonic homogenizer, deep freezer ( 10 c to 40 c), water baths, ph meter, flammable cabinet, heating mental, table top autoclave class b series, semi auto chemistry analyzer, pcr machine, refrigerated chiller, nucleic acid extraction system, mb 6900 plus, mb 1660, mb 2000, mb 2100, high speed table top refrigerated centrifuge, laboratory furniture, lab equipments and devices, herbal extracts, extracts etc..
PRODUCT INFO Ginger is an agricultural commodity which Thailand has the production potential. Mature ginger means rhizome of the harvested ginger at the age between 10-12 months after planting. Underneath the skin, the flesh is firm, fibrous, and ranges in color from yellow to brown. The rhizome is also highly fragrant with a warm, woody scent. When fresh, Ginger is juicy and crunchy with a pungent, spicy, and slightly sweet taste. SEASON Gingers are available year-round.
PRODUCT INFO Jackfruit spread through the rest of India and on to South-east Asia. The tree is large and the fruit itself grows not at the tip of limbs but rather out of the trunk. The jackfruit is the largest tree-born fruit in the world. A single pod can reach a length of nearly a meter and weigh close to 40 kilograms. USES The Jackfruit bulbs can be eaten fresh, frozen, cooked or pureed. Younger Jackfruit is added to curries and can be roasted or baked and eaten as a vegetable. It is often shredded and used as a meat substitute. Riper Jackfruit bulbs are added to salads. Make jam or ice cream from pureed bulbs. Boiling Jackfruit bulbs in milk and then straining off the liquid will result in a custard-like consistency once it has cooled. Jackfruit can be dried and then fried in oil, salted and eaten like potato chips. Jackfruit seeds can be roasted and eaten like chestnuts or dried and ground into flour. Jackfruit does not keep well once it is ripe. Unused portions of prepared fruit can be refrigerated for a few days or frozen for a few weeks. Jackfruit is very nutrient-dense. It is a great source of fiber, protein and vitamin B. It also contains potassium, iron and calcium. The deep yellow-orange color of the Jackfruit bulbs is the result of phytonutrients like beta-carotene, giving the fruit powerful antioxidant properties. SEASON Jackfruits can be produced nearly all year round.
PRODUCT INFO Langsat fruits are small to medium in size, averaging 3-7 centimeters in diameter, and are round to slightly oval in shape, growing in large clusters of approximately ten fruits. The thick rind is hard, leathery, and tan to pale yellow, developing brown spots and blemishes as the fruit matures. The rind is also covered in fine hairs giving the fruit a fuzzy appearance. Underneath the surface, there is a white, spongy, and very bitter layer that is easily separated and peeled, and the flesh is thick, translucent-white, and is typically divided into 1-5 segments. These segments are juicy, tender, and soft with a texture similar to grapes, and the flesh may be seedless or contain a few bitter seeds. Langsat fruits are very sour when young, but as they mature, the fruits develop a sweet-tart flavor with light acidity, reminiscent of grapefruit and pomelo. Langsat is an excellent source of vitamins A, B, C, and E, fiber, and also contains some iron, phosphorus, potassium, and calcium. USES Langsat is best suited for raw applications as its sweet and tangy flavor is showcased when consumed fresh, out-of-hand. The rind is easily peeled and removed from the flesh, and the segments can be consumed whole, discarding the small bitter seed. Langsat can be served as a snack or as a fresh dessert. It is also commonly segmented and mixed into fruit salads, green salads, juiced or blended into fruit drinks, or coated in syrups for a sweeter flavor to add to ice cream, desserts, and pastries. In addition to fresh preparations, Langsat can be combined into sauces, jams, and jellies for a sweet-tart preserve. Duku pairs well with other tropical fruits such as snake fruit, lychee, and rambutan, mint, basil, and cilantro. The fruits will keep for 3-4 days at room temperature and up to one week when stored in the refrigerator. SEASON Langsat fruits are available year-round in Southeast Asia, with a peak season in the fall through early winter.
Durian is a tropical fruit distinguished by its large size and spiky, hard outer shell. It has a smelly, custard-like flesh with large seeds. There are several varieties, but the most common one is Durio zibethinus. The fruit's flesh can range in color. It's most commonly yellow or pale yellow, but can also be red or green. Durian grows in tropical regions around the world, particularly in the Southeast Asian countries of Malaysia, Indonesia, and Thailand. The most poppular variety for export is Monthong, Chanee, Kradum, Kanyao, Volcano and a few other. PRODUCT INFO Durian can be export as Whole Fresh Durian, size from 2-6kgs with at least 3 lobes to maximum 6 lobes. Depends on destinaton regulation on the chemical and pesticide restriction. Fresh Whole Durian can export both sea & air. The ripeness level is depending on transit time using for transport to destination plus shelf life for sell at destination. Durian can also be export as Peeled Fresh Durian in retail package. This is more convenient than Whole Fresh Durian which is sophisticated to whom that have less knowledge of how to notice the ripeness level (sotfness of the Durian meat). USES Durian can be consumed cooked or raw. It provides a distinctive taste to any dish and is often used in Asian cuisine to flavor ice cream, cakes, and other baked goods. Durian's outer shell must be removed before eating. Place durian stem side down on a sturdy counter. Then, slice into the spiny skin about 3-4 inches deep. Use your hands to pull the skin apart and reveal the fruit. Durian is divided into pods. Each has a pit or a stone that should be removed prior to eating. SEASONS Durian can be produced nearly all year round
Durian is a tropical fruit distinguished by its large size and spiky, hard outer shell. It has a smelly, custard-like flesh with large seeds. There are several varieties, but the most common one is Durio zibethinus. The fruit's flesh can range in color. It's most commonly yellow or pale yellow, but can also be red or green. Durian grows in tropical regions around the world, particularly in the Southeast Asian countries of Malaysia, Indonesia, and Thailand. The most poppular variety for export is Monthong, Chanee, Kradum, Kanyao, Volcano and a few other. Frozen Peeled Durian use maturity / ripeness level to freeze at -18 degree celsius with this process the shelf life can be up to 2 years in the good condition. PRODUCT INFO Durian can be export as Whole Fresh Durian, size from 2-6kgs with at least 3 lobes to maximum 6 lobes. Depends on destinaton regulation on the chemical and pesticide restriction. Fresh Whole Durian can export both sea & air. The ripeness level is depending on transit time using for transport to destination plus shelf life for sell at destination. Durian can also be export as Peeled Fresh Durian in retail package. This is more convenient than Whole Fresh Durian which is sophisticated to whom that have less knowledge of how to notice the ripeness level (sotfness of the Durian meat). USES Durian can be consumed cooked or raw. It provides a distinctive taste to any dish and is often used in Asian cuisine to flavor ice cream, cakes, and other baked goods. Durian's outer shell must be removed before eating. Place durian stem side down on a sturdy counter. Then, slice into the spiny skin about 3â??4 inches deep. Use your hands to pull the skin apart and reveal the fruit. Durian is divided into pods. Each has a pit or a stone that should be removed prior to eating. SEASONS Durian can be produced all year round
The kaffir lime tree is native to tropical Southeast Asia and was spread to neighboring regions via exporters and trade routes. Today Kaffir lime leaves are available in fresh markets and frozen in specialty grocers in Asia, Southeast Asia, Africa, the United States. PRODUCT INFO Kaffir limes are widely used in Thailand as a household ingredient. Essential oils are extracted from the fruit's peel and are used for cleaning products, shampoos, and as a method to kill lice. The fruit's zest is used to flavor curries and soups, and the leaves are also crushed and used as potpourri or placed in a hot bath for a citrus aroma. Kaffir lime plants are so common and frequently used in Thailand that the majority of rural households have their own trees growing in their backyards. Kaffir lime leaves are small to medium in size and oblong in shape, averaging 3-5 centimeters in diameter and 8-12 centimeters in length. The top of the thick leaves is glossy and deep green, while the underside of the leaves is porous and a pale, matte green. Kaffir lime leaves grow in pairs and grow in a double leaf formation, which means two leaves grow on either side of the stem and appear to mirror each other. There is a prominent central midrib or vein and the tips of the leaves can be slightly rounded or very pointed. Kaffir lime leaves have a strong citrus taste and aroma that is said to be a blend of mandarin orange, lemon, and lime. USES Kaffir lime leaves contain some antioxidants. They also contain limonene and citronella, which both contribute to the flavor and fragrance of the leaves and have been shown to have antimicrobial properties. Kaffir lime leaves can be used in both raw and cooked preparations such as boiling, steaming, and saut�©ing. They can be used fresh, dried, or from a frozen state and the thick leaves are never consumed whole, but rather steeped and later removed, or sliced very thinly. Kaffir lime leaves can be sliced and used in salads or shredded and used in fish cakes. They are also widely used in soups such as tom yum and hot and sour shrimp, curries, fried rice, pastes, and stir-fries. Their herbal citrus flavor can be used to infuse desserts such as custard and ice cream. Kaffir lime leaves pair well with lemongrass, basil, cardamom, curry leaves, mint, tamarind, turmeric, cumin, galangal, ginger, garlic, soy sauce, sesame oil, jasmine rice, meats such as lamb, chicken and pork, mussels, and coconut milk. They will keep up to two weeks when stored fresh in the refrigerator and up to one year when stored in a sealed container in the freezer. SEASON Kaffir Lime Leaves is available year-round.
