Description Two-component air-drying polyurethane based primer containing zinc phosphate as anti corrosive pigment. Recommended Use :- It is recommended as a primer for MS surface in OEM applications as well as in Process industries like fertilizer plants, Refineries, Petrochemical industries for protection of steel pipelines and structural from corrosion. Physical Data COLOUR : Grey FINISH : Matt SOLIDS BY VOLUME : 40 �± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�° C Hardener : Above 30�° C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be manually cleaned with brass wire brush, coarse emery paper, scraper, etc to remove rust, dust, loose old coating, oil, grease, and other foreign contaminants. It is preferable to give a solvent wipe after surface preparation. The surface should be absolutely dry, moisture and oil free before primer application or Phosphated components by 7-tank pretreatment process of surface preparation. Application Data MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray THINNER : Thinner 290 POT LIFE : 3 hours min at 30�° C RECOMMENDED DFT : 30-40 �µ. OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours (if it exceeds, the surface should be roughened by emery scuffing grade 320) COMPATIBILITY : Can be top coated with Epoxy, Polyurethane, Chlorinated rubber and Alkyd finish coatings.
Description Two component air drying aromatic polyurethane finish coating Recommended Use :- It is recommended as topcoat for Original Equipment Machines, Hygienic, Maintenance painting where mild chemical resistance along with good abrasion resistance and decorative finish are required. Sometimes it is recommended as undercoat of finish coats application for economic benefits. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 30C DRYING CHARACTERISTICS : SURFACE DRY :20 - 30 minutes (At 30C and 65% Relative humidity) HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a Topcoat, which is applied over underneath primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 followed by solvent wipe for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Deodorant and Anti Perspirant AFTERMOON (for man and woman) The best solution for dealing with serious body odor safely and comfortably. PRACTICAL â?? DURABLE â?? NON STICKY â?? FREE OF CHEMICALS This unique product is a natural mineral perfume mixed from plants that contains sulfur, antiseptics, and other natural ingredients to treat bacteria that cause body odor and neutralize acidic substances produced by the body, especially in certain places, namely the armpits, around the genitals, and between the toes which cause odor not good. Benefit : - Protects the body for more than 24 hours against sweat odor and body odor; - Helps get rid of skin problems, especially itching, athlete's foot, tinea versicolor, ringworm, and other skin diseases; - Helps smooth cracked heels and feet; - Used regularly as a base before you apply fragrance (makes the fragrance smell pure without mixing with body odor). How to use : 1. Eliminate Body odor. After showering, moisten the Aftermoon deodorant with water, then wipe it all over the body, underarms, or on bodies that usually sweat (armpits, legs, groin, etc.). 2. Eliminate Foot Smell Before wearing socks, wet this stone with water, then rub it on the soles of your feet and between your toes. 3. Eliminate itching Wet with water and then rub on the itchy places or Put the deodorant into a ladle filled with enough water (about 5 minutes), then stir until the color of the water changes (about 30 seconds), and wash the mixed water into the itchy places. 4. Clean the deodorant with water and a dry cloth. 5. Store it in a dry place. ----------------------
Deodorant and Anti Perspirant AFTERMOON (for man and woman) The best solution for dealing with serious body odor safely and comfortably. PRACTICAL â?? DURABLE â?? NON STICKY â?? FREE OF CHEMICALS This unique product is a natural mineral perfume mixed from plants that contains sulfur, antiseptics, and other natural ingredients to treat bacteria that cause body odor and neutralize acidic substances produced by the body, especially in certain places, namely the armpits, around the genitals, and between the toes which cause odor not good. Benefit : - Protects the body for more than 24 hours against sweat odor and body odor; - Helps get rid of skin problems, especially itching, athlete's foot, tinea versicolor, ringworm, and other skin diseases; - Helps smooth cracked heels and feet; - Used regularly as a base before you apply fragrance (makes the fragrance smell pure without mixing with body odor). How to use : 1. Eliminate Body odor. After showering, moisten the Aftermoon deodorant with water, then wipe it all over the body, underarms, or on bodies that usually sweat (armpits, legs, groin, etc.). 2. Eliminate Foot Smell Before wearing socks, wet this stone with water, then rub it on the soles of your feet and between your toes. 3. Eliminate itching Wet with water and then rub on the itchy places or Put the deodorant into a ladle filled with enough water (about 5 minutes), then stir until the color of the water changes (about 30 seconds), and wash the mixed water into the itchy places. 4. Clean the deodorant with water and a dry cloth. 5. Store it in a dry place.
Illuminate your space with the enchanting glow of Himalayan Salt Lamps. Handcrafted from authentic Himalayan salt crystals, these unique lamps offer more than just an elegant ambiance. Each lamp is a natural work of art, showcasing the beautiful hues and intricate patterns found within the salt. When lit, the Himalayan Salt Lamp emits a warm, soothing glow that creates a serene atmosphere. Whether placed in your living room, bedroom, or office, these lamps provide a calming effect that helps promote relaxation and reduce stress. Not only do Himalayan Salt Lamps offer aesthetic appeal, but they also have potential health benefits. The salt crystals are believed to release negative ions into the air, which can help purify and cleanse the surrounding environment. This can lead to improved indoor air quality, reducing the effects of allergens, pollutants, and electronic devices. Each lamp is unique in size, shape, and color, making it a one-of-a-kind addition to your home decor. The warm glow of the lamp creates a cozy and inviting ambiance, perfect for unwinding after a long day or setting a soothing atmosphere for meditation or To maintain your Himalayan Salt Lamp, simply wipe it with a dry cloth occasionally to remove any dust accumulation. As a natural hygroscopic material, the lamp may attract moisture, but this is normal and can be easily managed with regular cleaning. Experience the captivating beauty and potential health benefits of Himalayan Salt Lamps in your space. Embrace the tranquility and natural elegance they bring, while enjoying the soothing glow that sets the perfect mood for relaxation and rejuvenation.
Introducing our high-performance 900gsm truck trailer curtain, the perfect solution for transporting goods safely and securely. This heavy-duty curtain is designed to withstand the rigors of the road while providing excellent protection and durability. Key Features: Heavy-Duty Strength: With a sturdy weight of 900gsm, our truck trailer curtain offers exceptional strength and durability. It can handle heavy loads and withstand the demands of long-haul transportation. Waterproof and Weather-Resistant: The curtain is coated with a waterproof material that ensures reliable protection against rain, snow, and other weather conditions. Your goods will stay dry and safe during transit. Tear and Abrasion Resistance: Constructed with reinforced edges and a robust inner fabric layer, this curtain exhibits excellent tear and abrasion resistance. It can withstand rough handling, ensuring long-lasting performance. Quick and Easy Operation: The curtain is designed for quick and hassle-free operation. It can be easily opened and closed, allowing for efficient loading and unloading of goods. Secure Fastening: Equipped with high-quality buckles, straps, and fasteners, the curtain can be securely fastened to the trailer, providing a tight seal and preventing unauthorized access. Easy Maintenance: Cleaning and maintaining the curtain is simple. It can be easily wiped clean with a damp cloth or washed using mild soap and water. Regular maintenance will ensure its longevity. Choose our 900gsm truck trailer curtain for reliable protection and peace of mind during transportation. Its heavy-duty construction, waterproof features, and easy operation make it the ideal choice for trucking companies and logistics providers. Invest in quality and ensure the safety of your cargo with our 900gsm truck trailer curtain.
Introducing our high-quality 610gsm PVC tarpaulin, the ultimate solution for all your heavy-duty covering needs. This tarpaulin is specifically designed to withstand the harshest conditions, providing excellent protection and durability. Key Features: Heavy-Duty Strength: With a robust weight of 610gsm, our PVC tarpaulin offers exceptional strength and durability. It can withstand heavy loads, extreme weather conditions, and prolonged exposure to the elements. Waterproof and Weather-Resistant: The PVC coating ensures superior waterproofing, keeping your valuables and equipment safe and dry even during heavy rain or snow. It is also resistant to UV rays, preventing fading and deterioration from prolonged sun exposure. Tear and Abrasion Resistance: Constructed with reinforced edges and a strong polyester mesh inner layer, this tarpaulin exhibits excellent tear and abrasion resistance. It can withstand rough handling, making it ideal for construction sites, transportation, and industrial applications. Versatile Applications: Our 610gsm PVC tarpaulin is suitable for a wide range of applications, including truck covers, outdoor storage, construction sites, agricultural use, camping, and more. Its versatility makes it a reliable choice for various industries. Easy Installation and Secure Fastening: Equipped with sturdy metal grommets placed along the edges, this tarpaulin allows for easy installation and secure fastening. It can be easily attached to frames, structures, or tied down using bungee cords or ropes. Easy Maintenance: Cleaning and maintaining this tarpaulin is effortless. Simply wipe off any dirt or debris with a damp cloth, or for more stubborn stains, use mild soap and water. Ensure the tarpaulin is completely dry before folding and storing it. Invest in the superior quality and durability of our 610gsm PVC tarpaulin for unmatched protection and reliability. Whether you need to cover machinery, protect your outdoor belongings, or secure your construction site, this tarpaulin is designed to exceed your expectations. Choose our 610gsm PVC tarpaulin and experience long-lasting performance and peace of mind.
PVC skirting board is a type of skirting board that is made from polyvinyl chloride (PVC) plastic material. Skirting boards are installed at the base of interior walls to cover the joint between the wall and the floor. PVC skirting boards are a popular choice for many people because they are lightweight, durable, and easy to install. They come in a wide range of colors and finishes, so it's easy to find one that matches the style and color of your flooring and walls. One of the main advantages of PVC skirting boards is that they are very easy to maintain. They can be easily wiped down with a damp cloth to remove dirt and dust, and they don't require any special cleaning products or treatments. They are also resistant to moisture, making them a good choice for use in bathrooms and other damp areas. Practical PVC skirting boards for any type of floor The main advantage of Raitto PVC skirting boards is that they are easy to install and customize, which means they can match any type of floor. Designed to protect walls from wear and tear and hide uneven junctions between walls and floors, they're ideal for DIY home improvement. PVC skirting boards also meet aesthetic requirements in any case. Variety, customization, design What sets Raitto products apart is the ability to customize them and the wide variety of products that can be matched to shades and shades of various home decors. Take for example the wood effect PVC skirting boards, designed to match perfectly with various solid wood surfaces, from oak to larch, walnut and teak. We are able to reproduce any pattern or drawing to meet customer's requirements. In addition to a custom-made surface, these boards offer extreme protection - against water, moisture, impacts and cleaning agents. Plus, they're eco-friendly as they're formaldehyde-free and made from recycled PVC. Therefore, when attractiveness and practicality are the focus, Raitto's PVC skirting boards are the ideal solution and are also ideal for use in domestic environments.
Sport running waist bag with water bottle holder is made of soft neoprene, with the excellent elastic and extending. The bottle holder comes with elastic band to hold your bottle stand well without shaking. Earphone hole design is sweet for you to enjoy music when you running with this waist bag. The zipper pocket on it can keep your phone, card or key in it. Soft and comfortable EVA foam with breathable mesh on back supporting panel directly contact your body. Adjustable elastic waist strap can adjust the size what you need. Reflective design is to protect your safety in the night running. Its well remind the others that you in there if you take this waist bag with you. YKK zipper and the good buckle fastener make its well closure. The good quality hardware to make it looks more durable in use. Its light weight and convenient to carry accompany with you. Its will be a good gift for your friend, husband, wife, daughter, son, colleague who is favorite sporting or running. We are accept the customized logo, color, design as your requirement. So its maybe make as company annual promotion activity, or running club etc. Care Instructions image002.gifDO NOT IRON image004.gifDO NOT TUMBLE DRY image006.gifDO NOT DRY CLEAN image008.gifDO NOT WASH image010.gifDO NOT BLEACH â?? Remove wet items immediately â?? Wipe clean with a damp cloth when required â?? Do not use detergent url:http://www.meubag.com
Greetings from Vietnam Have you ever been purchasing CORN COB MEAL for producing ANIMAL FEED or Mushroom cultivation??? We are KIM MINH EXIM CO., LTD specialized in producing and supplying CORN COB MEAL besides CORN SILAGE, SUGAR CANE BAGASSE, TAPIOCA RESIDUE, BREWER DRIED POWDER could be used as material for fertilizer/compost and for animals feed. CORN COB MEAL Size: 1mm - 6mm Moisture: 14% Max Metal Cleaning , Pet litter and Medium for mushroom and so on 1. Polishing: can be used to wipe, dry grinding, metal or plastic, glass and other products. 2.adsorbability, adsorption at four times its weight of the liquid, is a great development of activated carbon resources.It is used for the wet water sports venue absorption, drying, and chemical waste absorption, a large area of water surface greasy dirt cleaning. 3.The non-toxic for feed industry: vitamin, condiment carrier. 4.Chemical stability: it is a kind of good medicine, chemical carrier. 5.Corncob as animal feed. Packing: 35kgs- 40kg/ PP bag Or 600kgs/ Jumbo bag Stuffing: 24Mt/ cont 40'HQ We assure that we can supply products in large quantity, high quality with a very competitive price. For more informations or orders, please do not hesitate to contact with us. I am looking forward to hearing from you soon. Phan Huynh Tel: +84787451711 Skype: PhanHuynh.KME Whatsapp/Mobile: +84787451711 Email: thanhquy(at)kimminhexim(dot)com GOOD DAY TO YOU! Thanks and Best Regards. logo 1.jpg KIM MINH EXIM CO., LTD Address: 43 Mac Dinh Chi, Dakao Ward, Dist , Ho chi minh City.
Shanghai clean paper Co., Ltd was founded on 2005 years, with 13years manufacturer experience. Our Folded Paper Hand Towels mainly send to USA, Australia, UK, Germany, PNG, FIJI ETC, we have multifold paper towel, interleaved paper towel, ultraslim paper towel, compact paper towel, c-fold and so on.IntroductionHand paper towel, which is absorbent strong and not easily broken, does not contain fluorescent agent, provides an atypically long and mini etc with different specifications, different terminal client demand, use comfortable and secure.Feature and Advantage1) Soft,comfortable, pure and eco-friendly2) Strong water absorption 3) No dust and free of power4) No harmful chemicals and perfume5) Factory directly supply/competitive price/reliable quality/unworried sales serviceSpecificationMaterialVirgin pulp ,Mixed pulp,reclycle pulp,TADColorNatural White,brown colorPly1ply,2plyEmbossingEdge embossing or fully embossingBasis Weight36gsm-45gsmSheet size21*22.5cm,22.5cm*23cm,23cm*30cm,24cm*24cm etcFoldMultifuld fold, N fold, C fold, V foldPacking250pcs/pack, 16packs/carton or 200pcs/pack, 20packs/ctnApplicationHotel, home, restaurant and other public places. widely used to wipe oil, water, car and else in other industry.Service1.Small Orders Accepted2.Prompt Delivery3.24hours on online service4.Good aftersales serviceFAQ1.Can you supply products with cheaper price?Answer:Yes,we are factory ,directly provide u one hand price.2.Can you provide OEM service and artwork design service?Answer:OEM is avaiableWe have professional designer,we provide artwork design free of charge.3.DeliveryAnswer:within 20days after we received ur deposit.If you are interested in any of our Folded Paper Hand Towels. or would like to discuss a custom order, please feel free to contact us.
Two-component polysulfide sealant, as known as a two-component, non-sag, premium polysulfide sealant, which is also called polysulfide sealant for building made up of liquid polysulfide rubber, and add tackifying resin, vulcanizing agent, accelerant and fortifier into it. It contains two components and it can vulcanize and crosslink by itself at room temperature. The two components have clear color difference, which makes the mixing more convenient. It can keep good air tightness and water resistance in continuous vibration and temperature changes. In addition, it has a good bonding effect for metal, concrete and other materials. Application The polysulfide sealant is suitable for outdoor or indoor and can be used to seal both static and dynamic joints: Used to caulk at concrete, building, and bridge. Used in anti-leakage caulking of various types of expansion joints, such as waterworks, swimming pools, reservoirs, power plants, dams, sewage treatment works and water supply and drainage systems and other projects. Used as the joints of precast concrete, and the seams of the glass and construction. Used in the seaming of metal siding, and the bonding of aluminum window frame. Using method Add component B and pigment into component A; Stir quickly up and down until it is well mixed; Wipe the mixed sealant in the site where is waiting for construction with a small shovel; Don´t soak and contact with water within 48 hours after construction. Note Component B should be fully added into component A, which will affect the curing time and plasticity; The available time of mixed sealant is 2 hours. So the sealant should be used up as soon as possible after preparation to avoid the paste curing; The surfaces waiting for construction must be clean, dry and frost-free, and must be free of oils, grease, paints, coatings, sealers, curing compound residues, and any other foreign matter that might prevent adhesion; Notice to avoid water and rain within 48 hours after construction.
Specification 1.Item#:16213upc #: 677974162135 2.Size: 12*16 in(30 x 40cm) 3.Removes wax and polish with ease 4.Cleans windows streak-free 5.Lifts dust from interior surfaces 6.Cleans without chemicals 7.Washable and reusable Uses and features 1. Wax and polish removal - these mighty cloths make quick work of caked-on wax and polish to reveal nothing but a brilliant shine! 2. Window and glass cleaning - dampen half of the cloth with water, leaving the other half dry. Wipe windows and mirrors with the damp s id e of the cloth then do a "quick over" with the dry side to reveal a streak-free shine! 3. Dusting - the unique weave of these cloths lifts away dust from dashboards, vents and removes pet hair like a magnet. Care For best results, hand or machine wash the microfiber auto cloths separately in warm water with a liquid detergent. Tumble dry low. Do not iron . Do not use bleach, fabric softener or dryer sheets. Caution The microfiber auto cloths will not scratch surfaces; however, it can pick up and trap particles that may scratch. Wash your microfiber auto cloths after each use to release trapped dirt and particles . Packing details 3pcs/pack . 6packs/polybag. 72pack/box Box size :17 * 17 *12 in 15lbs -
Food And Beverages, Bic Lighter, A4 Papers, Ppe, Oils, Nuts, Pasta, Face Mask, Gloves, Toilet Paper, Scrap, Herbal Extract Powder, Extract Powder, Kava Powder, Clavo Huasca Powder, Panax Ginseng, Yerba Mate , Asiatica,ginkgo Biloba , Voacanga Africana , Acorus Calamus , Colanut Kola Nut, Home, Psychedelic Herbs, Virola Bark Powder , Heimia Salicifolia Sinicuichi, Bay Bean Canavalia Maritima Extract , Mimosa Hostilis Inner Root Bark ,dream Herbs ,relaxing Herbs , Aphrodisiac Herbs , Damiana 10x Extrakt, Wild Dagga 20x Leonurus Leonotis, Red Kwao Krua 25x , Kra Thum Khok Mitragyna Hirsuta,5 Htp 99% Pure Griffonia Simplicifolia, Maeng Da Red, Wpc80 Whey Protein Concentrate, Nitrile, Glove, Face Mask, Scrap, Cooking Oil , Coffee, Corn , Scraps , Timber , Livestock ,.
Product Description 1. Directly manufacturer, disposable surgical gowns, any colors. 2, ISO, CE, PP, PP/PE, SMS, SMMS, 3. Capacity: 10, 000PCS/day, 1*40HQ can be finished within 10-15 days; 4. Good barrier to fluid and breathable, OEM packing design, service in 24 hours. Disposable Medical Reinforced SMS Surgical Gown with Velcro Disposable surgical gown Disposable coverall is made from high-performance isolation protective material. Widely used in medical safety protective, aseptic workshop, protective isolation, mining electronics factory, food factory farm animal husbandry biohazard and so on. With two kinds processes: Sewing and ultrasound thermal bonding. Material features: 1. PP disposable surgical gown It is made from hydrophobic polypropylene material, Latex-free; Abrasion-resistant; Low lint; With a high level of fluid repellency. Color: White, green, blue, yellow, orange and so on Material weight: 30-65GSM. 2. PP+PE disposable surgical gown It is made from PP+PE material, Latex-free; Abrasion-resistant; Completely impervious fluid and alcohol repellent. Color: White, green, blue, yellow. Material weight: 40-65GSM. 3. SMS disposable surgical gown (Standard and Reinforced): It is made from hydrophobic SMS/Spunlace material, Latex-free; Abrasion-resistant; Low lint; With a high level of fluid repellency; A good barrier to blood, body fluids and pathogens. With standard and reinforced style. Reinforced style with extra protection reinforcement on sleeve & chest which can be completely impervious fluid and alcohol repellent. Available color: White, blue. Material weight: 35-65GSM. 4. Microporous disposable surgical gown Permeability is strong, anti-static; Better permeability, in a variety of organic solvents, acid and alkali corrosion resistance at the same time, with high resistance to impact mechanical properties of the toughness, texture soft, comfortable not combustion-supporting non-toxic non-irritating, harmless to skin. Available color: White Material weight: 45-65GSM. Port: Shanghai or Wuhan Original: China Delivery time: As the quantity and time when we receive the 30% deposit MEDDOCARE also can provide you: 1. Face mask(1-3ply), many colors, tie on or with earloop; 2. Cap(such as bouffant cap/clip cap/mob cap/worker cap, etc. ) 3. Lab Coat(SBPP/PP+PE/SMS) 4. Coverall(SBPP/PP+PE/SMS/SF) 5. Patient Gown(PP/SMS) 6. Apron(PE) 7. Sauna coat/kimono(PP) 8. Sleeves(PP/PE) 9. Gloves(HDPE/LDPE) 10. Shoe cover(PP/CPE/PP+CPE/PE) 11. Boot cover(SBPP/CPE/SMS, etc. ) 12. Others(such as bed cover/Gauze roll/Mattress cover, etc. )
Wholesale Plastic Baseboard Plastic baseboard, also known as PVC baseboard, is a type of floor skirting made from polyvinyl chloride (PVC) material. It offers several advantages and is commonly used in both residential and commercial applications. What is wall skirting? Wall skirting, also known as cove base, is a trim, usually made of rubber or vinyl, that covers the bottom few inches of a wall. The baseboard is rolled to prevent wear and tear caused by the many factors that impact walls. Baseboard trims can also be used to cover gaps or inconsistencies between floors and walls. They are commonly used in commercial environments such as offices, stores and hospitals, but can also be used in the home. Baseboards can be made from a variety of materials. Rubber skirting has a matte finish, while vinyl skirting is more shiny. Rubber skirting with the toes protruding from the wall is recommended for high-traffic spaces, and is standard for compliance with most city building codes. Vinyl baseboards, rubber and vinyl blends, or thermoplastic baseboards are all durable. If you're looking for an inexpensive way to provide protection for the walls of your home or space, vinyl and rubber baseboard moldings are a great option. Here are some key points about plastic baseboard: Durability: Plastic baseboards are known for their durability and resistance to moisture, humidity, and impact. They do not warp, rot, or deteriorate over time, making them suitable for areas prone to moisture, such as bathrooms and kitchens. Easy Maintenance: PVC baseboards are relatively easy to clean and maintain. They can be wiped down with a damp cloth or mild detergent to remove dirt and stains. Due to their smooth surface, they are less prone to trapping dust and are resistant to scratching. Versatility: Plastic baseboards come in various sizes, styles, and colors, allowing for versatility in design. They can mimic the appearance of traditional wood baseboards or have a sleek, modern look. The wide range of options makes it easier to match them with different interior styles. Cost-Effective: PVC baseboards are generally more affordable compared to other materials like wood or MDF. They offer a cost-effective solution for those looking for a budget-friendly skirting option without compromising on quality and aesthetics. Installation: Plastic baseboards are lightweight, making them easier to handle and install. They can be attached to the wall using adhesive or screws, similar to other types of skirting. PVC baseboards often have interlocking or snap-on systems, making the installation process quicker and more convenient.
Painting aluminum trim coil at home and in workshop Painting aluminum trim coil at home and in workshop â??Painting aluminum trim coilâ?? is often asked about since aluminum siding and trim has been applied in decoration of so many houses in the past years. Learning about painting process in the workshop helps you to fully understand steps you should do at home to repair items made of trim aluminum coil. Before getting an aluminum trim coil roll painted, manufacturers would first clean the roll surface completely, either in physical or chemical ways. Sometimes mechanical equipment is necessary, too. The purpose is to remove any materials that might prevent the following anodizing step from going on effectively. A completely cleaned surface of aluminium coil will obtain a thick condense layer of anodizing film on the surface, but there will be micro holes on the surface, which should be concealed to make the film stronger and harder. To paint the coil, pvdf, pe and pvc paints are all applicable. These paints are divided into primers and finishing coats. Multiple painting produces lasting color coated aluminum coil in severe natural conditions. If you need to paint aluminum trim coil at home, the steps are similar in exception to the anodizing part. You should first scrub the aluminum part to be painted with soapy water by combining 1 gallon of warm water and 1/4 cup of dish soap in a bucket. Then then scrub down the entire aluminum surface to remove dirt and residue with the brush soaked with soapy water. Wipe the aluminum with a clean, damp cloth, and if there are still residues on the aluminium surface, brush it again until it gets fully cleaned. After the surface gets dry, you should begin your painting. Now the point is, do you need a primer? If you want your paint work last as long as possible, the answer is yes, for a primer functions as a secondary protection line of the aluminium trim coil. Make sure the primer you choose is safe for use on aluminum. Do not move on the next step until the primer is dry. Then dip a paintbrush into the paint, and brush the paint onto the aluminum using long, even strokes. Never allow anyone touch the aluminium until the paint gets dry.
YDS series liquid nitrogen tanks are mainly used to store liquid nitrogen and biological samples. Liquid nitrogen tank, also known as "liquid nitrogen biological container", is a low-temperature container that can store liquid nitrogen and biological samples. According to their uses, they can be divided into liquid nitrogen storage tanks, self-pressurized liquid nitrogen tanks, and gas-phase liquid nitrogen tanks. Among them, liquid nitrogen storage tanks can also be subdivided into storage types and transportation types. The storage type is mainly used for static storage and is not suitable for long-distance transportation during work; the transportation type is specially designed to meet transportation conditions and has an internal shock-proof function. Support, while also allowing for static storage when needed. Since liquid nitrogen tanks are used to store samples, they need to be used correctly: before use: 1. Check the jar Check whether the shell has any dents or dents, and whether the vacuum port is intact; Check whether there are foreign objects or impurities in the tank. If there are foreign objects, they need to be removed to prevent the inner tank from being corroded; 2. Pre-cooling Inject a small amount of liquid nitrogen into the tank to cool the inner liner; After injecting liquid nitrogen, cover the neck plug and leave it for a few hours, such as the boiling phenomenon disappears and the liquid nitrogen tends to stabilize; When the water droplets or frost produced by the heat exchange of the tank body fade away and there is no white frost on the neck plug, it means that the pre-cooling is completed. when using it: 1.Storage Store in a well-ventilated and cool place, do not expose to direct sunlight; Keep upright and do not tilt, lay horizontally, invert, pile up, hit each other or collide with other objects; 2.Transportation Handle it gently when moving and avoid sudden movements; It must be fixed during transportation to ensure that it will not shake during transportation; After use: Cleaning: 1. After the liquid nitrogen has evaporated, let it sit for several hours until the internal temperature of the container returns to normal temperature. 2. Pour warm water at 40 -50 into the container, and then wipe it with a cloth. 3. Rinse 2-3 times with clean water. 4. Invert the container to dry naturally. You can also use hot air to dry it. The suitable temperature is 40 -50 . Avoid hot air above 60 . After cleaning, store it in a dry and ventilated place, and check it regularly for next use.
Gold Foil Stickers Gold Sticker Printing Our foil sticker printing is great for adding a sparkling finishing touch that catches the eye and provides a premium look wherever it is applied. These items are perfect for bottles, candles and wedding stationery. We laminate your stickers to give them extra thickness for extra protection and durability. Our lamination process for foil sticker printing also gives the stickers a soft-touch matte finish that is crisp, smooth and highlights your glossy foil highlights, so they stand out and give off a bigger glow. Properties of Gold Foil Stickers Weatherproof The lamination on these stickers helps to protect these stickers against the harsh elements, be it sun or rain - you never have to worry when outdoors! Waterproof Being plastic, Synthetic stickers are also completely waterproof - so yes, they can withstand condensation, being splashed, or even completely soaked! Go ahead and try - we guarantee that your stickers will stay safe! Scratch-resistant / Tear-resistant Rest assured that frequent handling and scratches won't affect the print. Plus, they can't be torn easily either - perfect for heavy-duty usage! Oil & Chemical-resistant Oils are repelled by the protective laminated surface, ensuring that they do not seep in and damage the sticker surface. This goes for essential oils too. Lamination also ensures that these stickers remain chemical-resistant. Anything that might damage the print is repelled, ensuring their safety. Writable PVC stickers can be written on easily with oil-based markers, and you can be certain that they won't be easily wiped or rubbed off. Premium Quality PVC stickers are more expensive than our standard stickers, but this extra cost also translates into high-quality, gorgeously vibrant, and super durable stickers that are guaranteed to last! Create your custom metallic stickers Our custom sticker printing gives you complete design freedom to create unique items for you or your business. We use professional digital lamination technology to free you from pre-made designs and templates. With our foil sticker printing, you can print anything you like and choose from a wide range of foil colors. When using our foil sticker printing, you can choose the sticker size and shape, including custom shapes and the option to provide the items together on one sheet.
WALL GUARD PUTTY is a white cement based product with redispersible polymer and functional additives for application on interior and exterior rough plasters to give a smooth finish. FEATURES :- WALL GUARD PUTTY 1. Provides smooth and uniform finish to rough plasters 2. Good Workability 3. Does not require curing with water 4. Good water resistance 5. Good Tensile Adhesion Strength, Compressive Strength and Flexural Strength 6. Controlled water vapour permeability 7. Excellent abrasion resistance 8. Resists growth of algae and fungi on wall 9. Good intercoat adhesion to emulsion paints RECOMMENDED APPLICATION :- It can be used on all types of exterior cement plasters/interior walls, asbestos sheets, concrete etc PRODUCT TECHNICAL DATA :- COLOURS : White FINISH : Smooth and Matt COVERAGE : 2 coats: 10-15sq.ft/KG up to 1.5 mm thickness in two coat (It may vary from the quoted coverage to factor such as method and condition of application and surface roughness) DRYING TIME : 6-8 HOURS GLOSS LEVELS/SHEEN LEVELS : Silky smooth sheen FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable SUITABILITY OF THINNER PAINT Use within 24 hrs. SHELF LIFE 3 years from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat. PERFORMANCE DATA :- ABRASION RESISTANCE : Excellent WATER RESISTANCE : Excellent SHELF LIFE : 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. REMARKS : a) Kindly refer to the MSDS for the Saffro Mellow Coatings And Resinswhich gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts, wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
