Application: The electro-mechanical cable, belonging to electric devices cable, is mainly used for bearing pulling strength, system power supply, signal transmission and depth control and all kinds of gas and oil well operations such as logging, perforation, coring, etc. Performing Criterion: We produce according to the company standard (above SY/T6600-2004 and JB/T3302 Standard) and we can also produce as customers requirements. At present, we can offer over 30 kinds of electro-mechanical cables with four temperature grades of 150°C, 180°C, 232°C and 260°C. The diameter ranges from 5.6mm to13.2mm with number of cores between one and seven. Classification: Classification according to outer diameter: 5.6 mm electro-mechanical cable; 8.0mm electro-mechanical cable; 11.8mm electro-mechanical cable; 12.7mm electro-mechanical cable. Classification according to conductors: Mono conductor electro-mechanical cable; 3-conductor electro-mechanical cable; 4-conductor electro-mechanical cable; 7-conductor electro-mechanical cable. Classification according to temperature ratings: Nominal temperature electro-mechanical cable: temperature rating from -30 to 150°C, continuous operating temperature 125°C; High temperature electro-mechanical cable: temperature rating from -50 to 260°C, continuous operating temperature 232°C. Delivery Requirements: The cable should be neatly wrapped around the cable reel, which the core diameter is not less than 50 times of the cable, should not be slack crossed, both ends should be encapsulated, the length of short head cable which protruding outside should not be less than 300mm. Storage Instructions: 1. Cable should not be stored in the open air, cable reel does not be allowed keeping flat. 2. Cable reel souldnt be thrown down from high when transport, mechanical damage cables is forbidden. 3. Several reels lifting together is forbidden. Cable reels should be laid stably and fixed by right way in a vehicle, vessel and other transportation means, prevented from collisions or overturning.
Coal dryer can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. They are widely used in building materials, metallurgy, and chemical industry.The dryer can use coal, gas, electricity, oil and wind power to heat the dryer machine. Our products advantages of coal dryer: 1. High drying efficiency, big capacity, high running rate 2. Compact structure, operation stable, easy maintenance Coal rotary dryer is mainly compose of driving device, supporting roller, thrust roller, cylinder, kiln inlet, kiln outlet and sealing device. 1. 2-3 supporting points can guarantee the contacting surface between supporting roller and tyre is paralleled with axis line of cylinder during installation. 2. Supporting device is antifriction bearing (occasionally uses slide bearing). This design has simplified the supporting device of supporting roller, and reduced the useless power loss during operation. It has the features like easy operation and maintenance. 3. Suitable shim between tire and shell will ensure the tire ring on the shell tightly to increase the shell strength. 4. The main driving system uses new type ac variable frequency technology. Compared with electromagnetic speed control and dc speed control, that can save energy, have large range & high precision of speed regulation, high efficiency and running smoothly. Radial direction contacting type sealing device is adopted at kiln inlet and outlet. They are perfect suitable for dimension tolerance of cylinder and skewing movement of cylinder. This sealing deviceâ??s feature is good performance, longer working life and easy for replacement.
Deze wire offers excellent wire mesh filter discs of varied materials and sizes. Typical one is low carbon steel wire woven mesh punched into circular filter. The weaving method is plain, twill, or plain dutch and twill dutch. Also supply welded multi-layer pack filter used in rubber industry, plastic industry, oil industry and cereal sifter. Our high-speed cutting machines enable us to offer low prices on large and small quantities. Features: Materials: the materials of wire mesh filter discs are stainless wire mesh, phosphor copper wire mesh and brass wire mesh. Shape: deze wire wire mesh filter discs have variety of shapes, for instance round, rectangle, oval, crescent and semicircle. The wrapped brim material: copper coating nickel, aluminum, stainless steel. The layers of the filter: one layer, two layers, three layers and multi-layer. Benefits: Deze wire wire mesh filter discs have long service life. Wire mesh filter discs can withstand harsh work conditions. Can withstand high temperature. Excellence service properties. Applications of filter discs: Wire mesh filter discs are mainly used in the absorption, evaporation and filtration process in petroleum, chemical, medicine, metallurgy, machinery, ship and automobiles to delete the mist drop or liquid foam or used as air filter in cars and trucks. Wire mesh filter discs diameter; from 5mm to 1000mm. Fineness: From 1mesh to 2800mesh (according to specifications of filtration media).
We have two of the most trusted brands in stock with us, that is PATTA and HP both from TAIWAN. We usually have all the sizes of SelfDrilling Screws in Ready Stock 10*20,10*25,12*25,12*35,12*45,12*55,12*68,12*75 & 12*90 Self-drilling screws mainly has three advantages as following: » Firstly, Self Drilling Screws can save labor. Drilling hole, forming mating thread and clamping home can achieve in an easy operation. It doesn’t require for difficult alignment of two or more elements. » Secondly, Self Drilling Screws can save materials. It only needs one tool for application---screw drive. » Power drills, drill bits and elaborate and costly press tools and their maintenance are eliminated. » Finally, Self Drilling Screws can improve product quality. It ensures correct hole size every time, resulting in better thread engagement and tighter clamp. Self Drilling Screws features Drill Point which has precise cutting edges to improve drill performance with less EFFORT. The Unique Point to Thread design extrudes the metal preventing strip-out and maximizes pullout performance and minimizes back-out. » Drill Point has a unique curved edge at the corner of the drill point. This ensures that the drilling process becomes self-digging making drill penetration effortless. The conventional drill point only facilitates drilling. A knife like corner is created to scrape the steel off. Sufficient pressure has to be applied for more effective drilling making drilling tiring. » non walking drill point provides fast material engagement. Hex Head Self Drilling Screw comes with EPDM washers which provide excellent heat, cold, weather, Ozone, Oil resistance and very good bending strength, wear resistance, repulsive elasticity and compression strength. » Self Drilling Screws are engineered for fast drilling and smooth tapping with less effort. » Self Drilling Screws comes in both Zinc as well as Ruspert® Coating (Anti-Corrosive).
This product is suitable for bonding and combination of pearl cotton, softening point of 80 degrees or so, and yellowing resistance, will not affect the product quality and color specifications, such as the maximum extent to ensure the stability of the bonding material, not out of shape. For white colloid form. Epe pearl cotton glue composition analysis, curing material, viscosity, non-volatile detection. Epe pearl cotton glue ingredient analysis, curing content, viscosity, nonvolatile matter detection epe glue is a kind of polymer as the main body of one-component adhesive products, the new solution designed to remove epe materials difficult problem of epe special glue. 1.It has the advantages of room temperature curing, convenient operation, high initial adhesion, transparent, yellow and yellow change, fast positioning and non-toxic. 2. Single component, excellent water resistance, heat resistance, cold resistance, aging resistance, acid and alkali resistance, corrosion resistance, oil resistance and albinism. 3. Through the eu rohs standard, the storage of 1 year will not deteriorate, is the current domestic adhesion nylon plastic adhesive field of the first product. Epe materials dedicated plastic glue adhesive is widely used in epe foam packaging material, suitable for epe foam epe foaming, pp, pvc, sponge, foam, wood, polystyrene material such as glue, as well as the pearl cotton, soft material such as eva adhesive effect is obvious.
We are strategically located at sharjah u.A.E and fully equipped with latest technology to manufacture and deliver quality rubber products. The fully integrated plants has an installed capacity of 7000 mt/annum. It is managed by a team of professional and more then 80 dedicated workers. An online internal mixer with cooling batch off system calendaring line, rotocures and compression moulding presses are some of the major machinery installed for manufacturing products to meet the critical requirement of our customers. Nr / sbr sheet Neoprene sheet Nbr based oil resistance sheets Epdm sheet Electrical insulation sheets Nr / sbr based flooring sheet Other special rubber sheets - viton, silicon, hypalon, and butyl rubber sheet Compound for molding, extrusion and printing rollers Home â» products â» rubber matting Technical data sheet Anti - fatingue mat Anti-fatigue-mat Anti-fatigue-mat1 Anti-fatigue-mat2 Mats are manufactured in various designs and sizes including anti-fatigue, honeycomb, bubble, light cuisine and car mats. We also offer marble mats of various shades in continuous lengths of 10 meters and above for flooring. When it comes to maintainance, you can't beat the time labour and money saving convenince of zenith rubber matting. Zenith combines textured surfaces to provide cushioned comfort against injuries, nack and fatigue. Virtually maintainance free, they are easily installed in both new and existing facilities over any firm surface. Electrical insulation sheets Zenith rubber industries middle east l.L.C. Is the only company in the middle east which produces electrical insulation sheets suitable for electrical resistance from 11, 000 volts to 50, 000. They are produced in accordance to british specification bs 921 and australian standard as 2978. Zenith has calibrated equipment for inhouse testing of electrical sheets up to 50, 000 volts. Each and very meter is certified prior to shipment. Rib mat
Vane air motor description: With compressed air as actuating medium, vane air motor makes use of the expansion of compressed gases; convert the pressure energy into mechanical energy. Air motor has simple structure, small size, light weight, high horsepower, and easy to be operated and maintained. It also has the feature of proof water, fire, moisture and explosion. It can work in humid, high temperatures, high dust and other proof working environment. Besides mine, rock drilling and loading, it was also widely used for ships, metallurgical, chemical, petrochemical, volatile atmosphere, paper and other industries. Vane air motor features: 1. Great for harsh environments: it does not build up heat or sparks make air motors ideal for use in flammable or explosive applications. 2. Intrinsically safe in hazardous environment, can work in humid, high temperatures, high dust and other proof working environment, for example: mines , petrochemical , volatile atmosphere, flammable or explosive applications. 3. These air motors can be coupled with gearboxes to increase torque and reduce speed. 4. Simple structure, small size, light weight, high horsepower, and easy to be operated and maintained. 5. Air motors can easily operate under conditions which are unfavorable electric, hydraulic, stepper and servo motors. Applications: Mixing equipment, conveyor drives, pump drives, food packaging, pharmaceutical packaging, Winches and hoist, hose reels, fiberglass choppers, tension devices, turntables, oil and gas Industry for air winches and mining equipment
8/12/15KW commercial induction cooker Machine Core: 1, 32-bit DSP machine core,high-speed operation; 2, Precise temperature control , throw pots effect; 3, Anti-interference ability and stable operation; 4, 30 kinds intelligent detection and protection 5, Longer life LED Display Connect the power, LED display shows symbol, the red indicator flicker. You can choose fire level as you need. The led display show the fire level number. 1 �- 5 �, 1 � is MIN power, 5 � is MAX power. Both of the red and green indicator lighting, it is meaning the wok is heating. After you finish cooking, move the magnetic switch to OFF �. 1.Economic efficient: heating with the principle of electromagnetic ,heat faster, thermal efficiency is up to 90% and improve the dishes rate; 2.Energy-saving: exist no heat conduction and thermal, energy-saving over 50% than the ordinary gas/oil focal , Save money = Make money 3.Environmental protection: no flame, no dust, halogen-light exhaust, ultra low noise design (below 45 db), optimized kitchen environment; 4.Safety: security protection such as waterproof, prevent smoke, prevent leakage, prevent dry heating protection ,more safe , electricity -saving 5.Intelligent design: nine gear firepower circulation adjustment, balance the power output, circulating cooling structure, 6.Beautiful apperence: stainless steel seiko meticulous humanized design, high-grade durable, easy to clean, 7. Durable: 201 durable stainless steel
Bromochloro-5,5-dimethylimidazolidine-2,4-dione (BCDMH) Chemical name: Bromochloro-5,5-dimethylimidazolidine-2,4-dione CAS NO. : 32718-18-6 Molecular formula: C5H6BrCLN2O2 Structural formula: Molecular weight: 241.5 Properties: white or off-white crystalline powder, slightly dissolved in water,dissolved in chloroform,ethanol and other organic solvent,easy to decompose in strong acid or alkali,stable in dry state. Having slight irritation odour. Uses: mainly used in the disinfection of industrial circulating water, swimming pool, oil field water, spring, hospital sewage, medicinal facilities, aquaculture, food process, hotel, home, warehouse, custom and epidemic-stricken area. Quality index(company standard): Item Index Top-grade Qualified product (BCDMH) Bromochloro-5,5-dimethylimidazolidine-2,4-dione Mass fraction of , % 98.0MIN 96.0 Mass fraction of bromine, % 31.0-35.0 31.0-35.0 Mass fraction of chlorine, % 155-162 155-162 Melting point, Loss on dry(60,1h)% 0.50MAX 0.80 Chroma, YID1925 7.0MAX --- Insoluble in chloroform, % 0.50MAX --- Type of commodities: Tablets:20G/Tablet, 80G/Tablet granule: irregular granule from 8mesh to 30mesh powder Packing: This product is sealed in paper-plastic multiple bag with lining of two PE bags,net weight:25Kg,flake product packaged in 25Kg paper sheet barrel with PE bag lining.This product should be stored in shady dry environment and forbidden to be stored with poisonous or harmful material,preventing from pollution. If you have any demand about my products.
OIT-99 2.CAS#: 26530-20-1 Specifications No. Item Description 1 Appearance Yellow transparent dense form liquid or tie crystal 2 Content of Active Substance (%) 99min 3 pH value 1.0max 4 Density (g/ml) 1.03-1.05 Application field Suitable for applications in the industrial oil, plastic, building materials, leather, paint, and textile printing and dyeing areas to protect against mildews Performance characteristics 1. Demonstrate an excellent bactericidal effect; with broad-spectrum, long-lasting features. 2. Low toxicity; easy to operate; can be added at any production step. 3. Applicable in the medium of the pH value in a range of 5 to 9. 4. Good uniformity of dispersion; contain no VOC; with thermal stability. 5. Not combustible and easy to transport and use. 6. Stable in the intense ultraviolet or acid rain environment. Usage andCautions 1. It is recommended to use the concentration of using in the range of 0.1 to 0.5%, depending on the actual applications. This product is also widely used for sterilization of interior and exterior latex paints to protect against mildews; suitable for use in the production of eco-friendly latex paints; it is recommended to adopt the adding concentration of 0.1 - 0.3% depending on the performance and service environment of paints. 2. If it splashes onto the skin, rinse with water immediately to avoid irritation or cauma. 3. This product should be used in the medium of pH 9.5max. 4. Wear protective clothes, rubber gloves, goggles and masks; avoid any contact with the skin, eyes and mucous membranes. Packaging 200 kg per drum. Storage and Transportation To be stored at room temperature in a dark place; with a shelf time of one year If you have any demand about my products.
CMIT/MIT-14 CAS NO.: CMIT/MIT 26172-55-4/2682-20-4 Specifications: Item Description Appearance Yellow or yellow-green transparent liquid Content of Active Substance (%) 14.0min Rate of Chlorine 2.5 to 3.5 pH value 2.0 to 4.0 Density (g/ml) 1.27 to 1.33 Application field: The compliant lotion, building materials, electric power metallurgy, oil field chemical engineering, leather, paint coating and spinning prints to dye, the day turn, the antisepsis of cosmetics, deckle, the water transaction etc. realm. Performance characteristics: 1. As a broad-spectrum, long-lasting bactericide to kill many bacteria, fungi and yeasts, the using amount is small. 2. Suitable for use in the medium of the pH value in the range of 2 to 9; free of divalent salt, cross-link no emulsion. 3. Miscible with water; can be added in any production step; easy to use. 4. It has a low toxicity and an appropriate concentration of using, which will lead to no harm completely Usage and Cautions: 1. In water treatment applications, dilute it into a 1.5% aqueous solution first. Add the solution at a quantity of 80 to 100 ppm for one or two times each week depending on the multiplication of microorganisms like bacteria and algae. 2. Avoid direct eyes contact with it for a long period. Once the contact happens, rinse eyes with water without delay. No long-term contact with the skin is allowed. 3. Any contact with reducible metals is forbidden during storage, for example, iron and aluminum, so as to avoid decomposition. 4. Not suitable for use in the alkaline medium of pH> 9.0 due to its poor stability. Any combination of this chemical with highly nucleophilic chemicals, like S2- and R-NH2, will lead to declined quality or even complete failure of the product. Packaging: 250 kg per IBC drum or 250 kg per drum Storage and Transportation: To be stored at room temperature in a dark place; with a shelf time of one year If you have any demand about my products.
DCOIT-30 2.CAS#:64359-81-5 Specifications No. Item Description 1 Appearance Light yellow transparent liquid 2 Content of Active Substance (%) 30.0max Application field Suitable for the purposes of preventing corrosion and contamination in marine paints Performance characteristics 1. Used as a broad-spectrum, long-lasting bactericide. 2. Easy to operate; can be added in any production step. 3. Good compatibility with marine paints; not insoluble in water; soluble in oil-based marine paints 4. Thermal stability; easy to use. 5. Low solubility in water, thus bring lasting effects. 6. With the best results proved by up to five years of underwater tests Usage andCautions 1. Suitable for use in all marine paints. Can effectively kill many bacteria and mildews like penicillium notatum, basidiomycetes, aspergillus niger, fusarium, and curvularia. Can be added at any production step for use; it is recommended to adopt the concentration of 5 - 15% (w/w). 2. Operational instruction must be strictly followed. Avoid any contact with the skin. Wear protective clothes, goggles, and rubber gloves in operation. Once any contact with the skin happens, wash the skin immediately with plenty of water and soaps; when it splashes into eyes, wash immediately with plenty of water and buffer solutions. Packaging 180 kg per drum Storage and Transportation With a shelf time of one year when stored at room temperature in a dark, air-tight, and moisture-proof place If you have any demand about my products.
TD75 fixed type belt conveyor is used to convey bulk material or packed product, it can work single or several unit or work together with other conveyors form horizontal conveying system or inclined system. Its working temperature is between -25â??ï½?40â??, it requires conveying material should not exceed 60â??, heat-resistance belt can convey material below 120 â??ã??If material temperature higher than this, belt conveyor is not suitable. It should use oil resistance, or acid and bases proof rubber belt or plastic belt when it convey grease material or material has property of acid, bases etc. Application : Metallurgy, mining, coal, chemical engineering industries. Our products advantages: 1. Wide range of conveying material, it can convey wet, dry, powdery or lump material or packed product. 2.Big conveying capacity and long conveying distance. 3.It even can realize multipoint load material and discharge. 4.Stable running, small noise. 5. Simple structure, reliable working, easy operation, easy installation and maintenance. Structures: 1) Driving device of conveyor has open type and closed type. Open type: it is consist of motor, high speed coupling, brake, gearbox, low speed coupling. pin roller. The unit mount together on a steel base (motor power within 10kW), or mount on concrete base separately.( motor power more than 115kW). Closed driving device is electric drum, motor and gearbox system are mounted inside of drum. Compared to open driving device. its features are compact, safe operation, small land area, light, low cost. TD75 various specification drum to match its requirement. 2) At material feeding area, design impact roller to reduce impact from material to belt. 3) In order to avoid off-tracking, install one set groove aligning roller every 10 set on load section, install one set horizontal aligning roller every 6-10 set on on-load branch.
We Offer -- Free Custom Design Accept Small/OEM Order Construction Inner welded frame in stainless steel to guarantee superior strength and stability. 40 mm worktop in 304 stainless steel. 100 mm high upstand with 8 mm rounded corners and upturned edges. Easy access to the cupboard interior on all lengths guaranteed by the use of only 2 doors. Under panel and upturned edges for added protection. 304 stainless steel feet, 150 mm high and 52 mm in diameter, adjustable by -10/+30 mm. Sink bowl in 304 stainless steel, supplied with overflow drain pipe and drain hole. Sturdy sound-deadened sliding doors on tracks located flush to the front of the frame. Drainage area suitable for drying operations Constructed entirely in stainless steel to offer maximum durability -PRODUCT RANGE( standard/custom made/OEM): 1. Grease extraction & ventilator,Oil & smoke extractor 2. HongKong style stove series 3. Hongkong style stir fly stove series 4. Chinese style stir fly stove series 5. Energy conservation steam stove series 6. Open flame series 7. Pig/Duck roaster series 8. Snack stove series 9. Buffet equipment series 10. Steam rice cart series 11. Hand cart series, rice wash series 12. Preparation equipment series 13.western burner series 14.refrigeration series 15.food warmer, heating 16. washing series 17. food preparation series 18.food machine series -PROJECT REFERENCES: 1. Hilton (Haikou, Hainan Province), 2. Hilton(Wenchang, Hainan Province), 3. Sheraton oceanwide (Wuhan Hubei Province), 4. Kempinski Wuxi Yixing(Jiangsu Province), 5. Sichuan Yibin Crowne Plaza(Sichuan Province), 6. Huangshi Zhongyin Lamborghini Hotel, 7. Urumqi Ruihao International Hotel, etc
We Offer -- Free Custom Design Accept Small/OEM Order -size:700*1400*850mm -weight:60kg -optional accessories:undercounter sink, tap -warranty:1 year -packing:1 piece per carton -payment terms: T/T, Western Union, Paypal Construction 100 mm upstand. Worktop 700 mm in depth, 50 mm in height constructed in 304 stainless steel. Square legs, 40x40 mm in 304 stainless steel and adjustable feet -PRODUCT RANGE( standard/custom made/OEM): 1. Grease extraction & ventilator,Oil & smoke extractor 2. HongKong style stove series 3. Hongkong style stir fly stove series 4. Chinese style stir fly stove series 5. Energy conservation steam stove series 6.Open flame series 7. Pig/Duck roaster series 8. Snack stove series 9.Buffet equipment series 10. Steam rice cart series 11. Hand cart series, rice wash series 12. Preparation equipment series 13.western burner series 14.refrigeration series 15food warmer, heating 16. washing series 17. food preparation series -PROJECTS REFERENCES 1. Hilton (Haikou, Hainan Province), 2. Hilton(Wenchang, Hainan Province), 3. Sheraton oceanwide (Wuhan Hubei Province), 4. Kempinski Wuxi Yixing(Jiangsu Province), 5. Sichuan Yibin Crowne Plaza(Sichuan Province), 6. Huangshi Zhongyin Lamborghini Hotel, 7. Urumqi Ruihao International Hotel, etc
It is helpful in treating rheumatoid arthritis, osteoarthritis, post-herpetic neuralgia, painful diabetic neuropathy and other peripheric sensorial neuropathies. It is also used in treating muscle, joint discomforts, as well as rheumatism, sciatica and lumbago. Capsicum oleoresin is a natural extract obtained from capsicum annuum. Its most important active ingredient is the capcaicin, which gives the pepper its bitterness. Vanilloids are mostly in interaction with receptors located at peripheral nerves. Capsaicin is connected to C-Type vanilloid receptors (VR1) starts calcium flow by causing the cation channels to be opened. Calcium flow is an excitatory response, and it starts the release of neuropeptites (P substance). Neuropeptides are responsible for chemically-born pain, heat regulation and neurogenic inflammation. With the blockage of calcium channel, P substance shall be depleted in sensual fibers With the blockage of calcium channel, P substance depletion occurs in sensual fibers and, as a result, pain loss is achieved. Camphor inhibits a wide range of different receptors. When induced by camphor, desensitization occurs in TRPV1 (transient receptor potential vanilloid subtype 1), and the blockage of TRPA1 (transient receptor potential ankyrin-repeat) receptor takes place. These form the basis for the analgesic effects of camphor. Menthol is one of the main ingredients of the essential oil obtained from mint. It is used for the treatment of inflammation, spasm and pain and applied from inside or outside (superficially). After the topical application, menthol inhibits the calcium ion currents of the nerve membranes by stimulating the "cold" receptors, and creates a feeling of coolness.
Hex flange bolt Standard: Ifi-111;din6921;iso15071;gb5787 Size: 1/4â?�-3/4â?�, m6-m20 Material: Carbon steel, alloy steel, stainless steel, brass Grade: Sae j429 gr.2, 5, 8; astm a307gr.A, class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
T head bolts Standard: Asme b18.5;din261;din186 or custom demand Size: 1/4â?�-1â?�; m6-m30 Material: Carbon steel, alloy steel, stainless steel Grade: Sae j429 gr.2, 5, 8 class 4.8, 8.8, 10.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel;metal building;oil&gas;tower&pole;wind energy;mechanical machine;automobile;home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Lifting eye bolt Standard: Asme/ansi b18.15;din580;gb825 Size: 1/4â?�-2â?�;m8-m64 Material: Carbon steel, alloy steel, stainless steel Grade: 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
Hex coupling nut Standard: Ifi-128; din6334 Size: 1/4â?�â??6â?�; m3-m42 Material: Carbon steel, alloy steel, stainless steel, brass Grade: Sae j995 gr.2, 5, 8 Thread: M, unc, unf Finish: Plain, zinc plated(clear/blue/yellow/black), black oxide, nickel, chrome, h.D.G Packing: Bulk in cartons (25kg max.)+wood pallet or according to customer special demand Application: Structural steel; metal building; oil&gas; tower&pole; wind energy; mechanical machine; automobile: home decorating Equipment: Caliper, go&no-go gauge, tensile test machine, hardness tester, salt spraying tester, h.D.G thickness tester Supply ability: 1000 tons per month Minimum order: 500kgs for each specification Trade term: Fob/cif/cfr/cnf/exw/ddu/ddp Payment : T/t, l/c, etc Market: South&north america/europe/east&south east asia/ australia and etc. Our advantage: One-stop shopping; high quality; competitive price; timely delivery; technical support; supply material and test reports; samples for free Notice: Please lets know the size, quantity, material or grade, surface, if it is special and non-standard products, please supply the drawing or photos or samples to us -
