Application: The electro-mechanical cable, belonging to electric devices cable, is mainly used for bearing pulling strength, system power supply, signal transmission and depth control and all kinds of gas and oil well operations such as logging, perforation, coring, etc. Performing Criterion: We produce according to the company standard (above SY/T6600-2004 and JB/T3302 Standard) and we can also produce as customers requirements. At present, we can offer over 30 kinds of electro-mechanical cables with four temperature grades of 150°C, 180°C, 232°C and 260°C. The diameter ranges from 5.6mm to13.2mm with number of cores between one and seven. Classification: Classification according to outer diameter: 5.6 mm electro-mechanical cable; 8.0mm electro-mechanical cable; 11.8mm electro-mechanical cable; 12.7mm electro-mechanical cable. Classification according to conductors: Mono conductor electro-mechanical cable; 3-conductor electro-mechanical cable; 4-conductor electro-mechanical cable; 7-conductor electro-mechanical cable. Classification according to temperature ratings: Nominal temperature electro-mechanical cable: temperature rating from -30 to 150°C, continuous operating temperature 125°C; High temperature electro-mechanical cable: temperature rating from -50 to 260°C, continuous operating temperature 232°C. Delivery Requirements: The cable should be neatly wrapped around the cable reel, which the core diameter is not less than 50 times of the cable, should not be slack crossed, both ends should be encapsulated, the length of short head cable which protruding outside should not be less than 300mm. Storage Instructions: 1. Cable should not be stored in the open air, cable reel does not be allowed keeping flat. 2. Cable reel souldnt be thrown down from high when transport, mechanical damage cables is forbidden. 3. Several reels lifting together is forbidden. Cable reels should be laid stably and fixed by right way in a vehicle, vessel and other transportation means, prevented from collisions or overturning.