lkyl Sulfonic Acid Phenyl Ester (T-50) Alkyl sulfonic acid phenyl ester (T-50 ) is a general-purpose environmental plasticizer, with excellent gel properties and saponification resistance. It is suitable for many forms of polymers such as PVC and PU. Chemical components: Alkyl Sulfonic Acid Phenyl Ester (ASE) CAS NO.: 91082-17-6 Exterior: Transparent , pale yellow clear liquid Chemical formula: Rso2C6H5(R=C12H25---C18H37) Health and safety information : Refer to the Safety Data Sheet The relevant laws of instruction : Alkyl Sulfonic Acid Phenyl Ester is not classified as dangerous according to regulations of the People 's Republic of China on Hazardous Chemicals and European Related States Storage: Alkyl Sulfonic Acid Phenyl Ester (T-50) is stored in sealed original barrels and dry place because it is sensitive to moisture. And it can be stored for 2 years even longer under the right stored measure. Do not contact with iron for long periods of time to avoid discoloration The raw materials recommendations of transport and storage containers : aluminum or stainless steel (V4A or V2A) barrels with oil resistant coating. In order to ensure that the Alkyl Sulfonic Acid Phenyl Ester can be easily extracted from the outdoor tanker at low temperatures, the tanker is isolated firstly or slightly heat Alkyl Sulfonic Acid Phenyl Ester with warm water which is the ideal heating medium . But avoid steam heating and the heating coil must be aluminum or stainless steel (V4A). Solubility: Dissolved in the general organic solvent but not in water. Package: Tanker or metal bucket Explanation and Application: The storage tank, pipeline diameter and pump design are important parameters for density, viscosity and vapor pressure measurement when stored.
Sintered stainless steel mesh filter is a new type of filter material made of multi-layer metal woven wire mesh through special lamination pressing and vacuum sintering. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal The filtration structure has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance, cold resistance and processability, especially ideal for filtration that requires high compressive strength and uniform filtration precision. Parameters: Material: 316L stainless steel Filtration accuracy: 0.22-100um Size: standard or customized Application: (1) Used as dispersion cooling material in extremely high temperature environment; (2) Orifice plate material for gas release liquid fluidized bed; (3) Used for high-precision, high-reliability high-temperature filter materials; (4) Used for high pressure backwash oil filter. Examples: (1) Precision filtration of various hydraulic oils and lubricating oils in the machinery industry; (2) Filtration and purification of various polymer melts in the chemical fiber film industry, filtration of various high-temperature corrosive liquids in the petrochemical industry, filtration, washing and drying of materials in the pharmaceutical industry; (3) Application of gas homogenization in powder industry, fluidized plate in steel industry; (4) Buzzer, etc. in explosion-proof electrical appliances; (5) Gas-solid, liquid-solid, gas-liquid separation. Performance advantages: 1. High strength and rigidity: high mechanical strength and compressive strength; 2. High precision, uniform and stable: uniform filtering performance can be achieved for the filtering particle size with a precision of 1~300 m, and the mesh does not change during use; 3. Wide range of use environments: It can be used for filtration in temperature environments ranging from -200 C to 650 C and acid-base corrosive environments; 4. Excellent cleaning performance: good countercurrent cleaning effect, can be used repeatedly, and long life (can be cleaned by countercurrent water, filtrate, ultrasonic waves, dissolution, baking, etc.).
Silicone fluid Dimethyl silicone Polydimethylsiloxane(PDMS) The chemical state of polydimethylsiloxane, colorless or light yellow liquid, odorless, high transparency. CAS No.: 63148-62-9 With excellent physical properties, it can be directly used for moisture-proof insulation, damping, shock absorption, defoaming, lubrication, polishing, etc. And as defoamer, mold release agent, paint and daily chemical additives. Application: Widely used in skin creams, hand creams, skin cleansers, sunscreens, shaving creams, deodorants, body washes, conditioners and other cosmetics. It can also be used to manufacture polishes and also be used as defoaming agents. It is also widely used as a release agent for various materials such as plastics and rubber, with excellent high and low temperature resistance, light transmission, electrical properties, hydrophobicity, moisture resistance and chemical stability. Q&A: 1. What is PDMS PDMS, also known as polydimethylsiloxane, is a silicon-based polymer that is a man-made synthetic molecule made up of repeating units called monomers. Silicon is the second most abundant element in the Earth's crust after oxygen, and silicon dioxide is also known as sand, commonly found on beaches and shores. PDMS can also be found in many cooking oils, processed foods and in fast food items such as chicken nuggets and French fries. 2. Are you a trading company or a a manufacturer We are manufacturer and have our own factory. Welcome to visit us. 3. What is your terms of delivery EXW, FOB, FCA, CFR, CIF. 4. Do you provide samples Yes, we could offer the sample for free charge but do not pay the cost of freight. 5. Do you test all your goods before delivery Yes, we have 100% test before delivery and can provide COA.
Max 20KN digital electronic universal testing machine auto tensile testing machine desktop tensile testing machine Universal Testing Machine This Series machine can be applied to test lots of materials in rubber tensile elongation, compression, tear, big size peel (can 90 degrees and 180 degrees) and other mid-force mechanical test 5KN, 10KN,20KN, optional), such as tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons, thread, spring, wood, medicine packaging materials, tapes etc. Rubber, PVC, PE, Polymer, Plastic, Metal 1. A) Tensile test: Main test tensile strength 2. B) 3-points bending test: Test material compression Technical Specifications Item Technical parameters Max load 20KN Maximum Load 500N, 1KN,2KN,5KN,10KN,20KN optional Extensometer Comply with Extensometer (if need, please inform supplier before order) Control Mode Force from 0.2% to 100% / from 0.4% to 100% Weight 350KG Accurate Grade 1 grade / 0.5 grade Effective Measuring Range Force from 0.2% to 100% from 0.4% to 100% Measuring Accuracy Load Sensor Basic configuration sensor max load: one Power Supply 220V, 50HZ or according to the requirement We is a professional manufacturer focused on developing and producing packaging material test instruments. Founded in 2002, the company has received IOS9001 certification and recognized as high-tech enterprise and software enterprise by national authority. We hold numerous technology patents and software certificates from the national authority and gained awards for technological progress.
PRODUCT INTRODUCTION: Polydextrose is a kind of water-soluble dietary fiber. Randomly boned condensation polymers of glucose with some sorbitol, end-groups, and with citric acid or phosphoric acid residues attached topolymers by mono or diester bonds. They are obtained by melting. It is white or off-white powder, soluble in water easily, the solubility is 70%. Soft sweet, no special taste. It has health care function and can supply the human body with water-soluble dietary fiber. APPLICATION: 1. Health products: direct taken directly such as tablets, capsules, oral liquids, granules, dose 5 15 g/day; as the addition of dietary fiber ingredients in health products: 0.5% 50% 2. Products:Â bread, bread, pastries, biscuits, noodles, instant noodles, and so on. Added: 0.5% 10% 3. Meats:Â ham, sausage, luncheon meats, sandwiches, meat, stuffing, etc. Added: 2.5% 20% 4. Dairy products:Â milk, soy milk, yogurt, milk, etc. Added: 0.5% 5% 5. Beverages:Â fruit juice, carbonated drinks. Added: 0.5% 3% 6. Wine:Â added to the liquor, wine, beer, cider, and wine, to produce high-fiber health wine. Added: 0.5%~10% 7. Condiments: sweet chili sauce, jam, soy sauce, vinegar, hot pot, noodles soup, and so on. Added: 5% 15% 8. Frozen foods: Â ice cream, popsicles, ice cream, etc. Added: 0.5% 5% 9. Snack food: Â pudding, jelly, etc; amount: 8% 9% FUNCTION: Increase the volume of feces, enhance bowel movement, reduce the risk of intestinal cancer, etc., combined with the removal of bile acids in vivo, lower serum cholesterol significantly, cause the feeling of satiety easily, can significantly reduce blood glucose levels after meal.
NEOFLON PFA AP-Series NEOFLON PFA is a copolymer of tetrafluoroethylene and perfluoroalkyl vinylether. It is a perfluoro polymer consisting of only carbon atoms and fluorine atoms without any hydrogen atom. It has the same excellent performance as PTFE in a wide range from extremely low to high temperatures. In addition, it has excellent transparency, mechanical strength at high temperature. It can be molded in the same molding method as general thermoplastic resins. Grades and Features of AP-Series Grades MFR (g/10 min.) Features AP-201 20 - 30 Superior in melt flowability. Suitable for injection-molded articles that have complex shape, and for ultrafine thin-wire coating (AWG34 - 44). AP-202 65 - 80 Excellent melt flowability. Suitable for injection-molded articles that have complex shape, and for thin-wire coating (AWG44 - 52). AP-210 10 - 17 Good melt flowability. Suitable for injection molding. AP-230 1.5 - 2.5 Superior in stress crack resistance. Suitable for extrusion and transfer molding. AP-201SH 20 - 30 High purity grade. Superior in melt flowability. Suitable for complex shape articles. AP-211SH 10 - 17 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for joints and parts for pumps. AP-215SH 10 - 17 High purity grade. Suitable for injection molding. Suitable for joints and parts for pumps. AP-231SH 1.5 - 2.5 High purity grade. Long-term flexibility and good stress crack resistance. Suitable for extrusion and transfer molding. AP-210AS 11 - 14 Anti-static grade. Suitable for injection molding. AP-230AS 1.5 - 3.0 Anti-static grade. Suitable for extrusion molding. AP-230ASL 1.0 - 2.5 Anti-static grade. Suitable for extrusion molding.
Product Name : Laminated glassï¼?Fresh and high quality float glassï¼?Tempered glassï¼?Low-e coated glass,Low-energy-saving composite glass,Acid glass Product Description : Laminated glass is a composite glass product formed by sandwiching one or multiply layers of organic polymer medium films between two or many pieces of glass and carrying out special high-temperature pre-compression (or vacuumizing) and high-temperature high-pressure fabrication processing to adhere the glass to the medium films permanently. In addition, there are also some relatively special products such as colored medium film laminated glass, SGX series printing medium film laminated glass, XIR series Low-e medium film laminated glass and so on, as well as embedded decorative part (metal nets, metal plates, etc.) laminated glass, embedded PET laminated glass and other kinds of decorative and functional laminated glass. Price of product ( USD price or FOB price) : Negotiate Product origin : Zibo,Shandong,China Key Specifications/Special Features : Features: safety, hurricane and earthquake resistance, bulletproof and explosion-proof performance, UV resistance, noise resistance. Varieties: transparent float laminated , ultra-clear laminated, tempered laminated, coated laminated, colored laminated, etc. Specifications: the maximum size: 2,440*3,660mm. thickness: 4-50mm Minimum Order Size and Packgaing details : usually fixed with wooden frame,shipped by 20' container
Product Name : Laminated glassï¼?Fresh and high quality float glassï¼?Tempered glassï¼?Low-e coated glass,Low-energy-saving composite glass,Acid glass Product Description : Laminated glass is a composite glass product formed by sandwiching one or multiply layers of organic polymer medium films between two or many pieces of glass and carrying out special high-temperature pre-compression (or vacuumizing) and high-temperature high-pressure fabrication processing to adhere the glass to the medium films permanently. In addition, there are also some relatively special products such as colored medium film laminated glass, SGX series printing medium film laminated glass, XIR series Low-e medium film laminated glass and so on, as well as embedded decorative part (metal nets, metal plates, etc.) laminated glass, embedded PET laminated glass and other kinds of decorative and functional laminated glass. Price of product ( USD price or FOB price) : Negotiate Product origin : Zibo,Shandong,China Key Specifications/Special Features : Features: safety, hurricane and earthquake resistance, bulletproof and explosion-proof performance, UV resistance, noise resistance. Varieties: transparent float laminated , ultra-clear laminated, tempered laminated, coated laminated, colored laminated, etc. Specifications: the maximum size: 2,440*3,660mm. thickness: 4-50mm Minimum Order Size and Packgaing details : usually fixed with wooden frame,shipped by 20' container
Product Name : Laminated glass Fresh and high quality float glass Tempered glass Low-e coated glass,Low-energy-saving composite glass,Acid glass Product Description : Laminated glass is a composite glass product formed by sandwiching one or multiply layers of organic polymer medium films between two or many pieces of glass and carrying out special high-temperature pre-compression (or vacuumizing) and high-temperature high-pressure fabrication processing to adhere the glass to the medium films permanently. In addition, there are also some relatively special products such as colored medium film laminated glass, SGX series printing medium film laminated glass, XIR series Low-e medium film laminated glass and so on, as well as embedded decorative part (metal nets, metal plates, etc.) laminated glass, embedded PET laminated glass and other kinds of decorative and functional laminated glass. Price of product ( USD price or FOB price) : Negotiate Product origin : Zibo,Shandong,China Key Specifications/Special Features : Features: safety, hurricane and earthquake resistance, bulletproof and explosion-proof performance, UV resistance, noise resistance. Varieties: transparent float laminated , ultra-clear laminated, tempered laminated, coated laminated, colored laminated, etc. Specifications: the maximum size: 2,440*3,660mm. thickness: 4-50mm Minimum Order Size and Packgaing details : usually fixed with wooden frame,shipped by 20' container
Application Track Private cars/Vehicle rental /Fleet management/ Equipment outside etc Track container/cargo GPS+LBS+WIFI+BD+GLONASS Supports GPS & LBS + WIFE & GLONASS. Automatically switch according to the use environment and area. Content Product 4G version of strong magnetic vehicle positioning terminal Model GT208-4G strong magnetic / wireless charging Colour Black Way to install Strong magnetic free installation Application Vehicles/motorcycles/electric vehicles Configuration SIM SD NANO card Chip Spreadtrum SC9820E G-sensor Three axis acceleration sensor Start Time Cold start 45-120s Warm start 35s Hot start 1s Battery 3.7V 6000mAh polymer battery Standby 30 days Voltage DC:5V Electrostatic protection touch +/- 7KV Air +/- 10Kv Operating tem -20~55 Operating humidity 5%-95% Storage tem -40 85 Size 99mm * 61mm * 24mm Weight 175g 4G 4G TDD:B38/B39/B40/B41, FDD:B1/B3/B8 3G WCDMA:B1/B5/B8 2G 900/1800 MHz Frequency error 0.1ppm GPS Received signal 48dBhz above Received power -120dBm Location precision 10 m Location time Cold boot 35s-80s Hot boot 1s Tracking sensitivity -165dBm channel 66 passage
A binder or binding agent is any material or substance that holds or draws other materials together to form a cohesive whole mechanically, chemically, by adhesion or cohesion. In a more narrow sense, binders are liquid or dough-like substances that harden by a chemical or physical process and bind fibres, filler powder and other particles added into it. Examples include glue, adhesive and thickening. APPLICATION Pidicryl binder SUN is a new generation binder used for pigment printing on cotton, viscose, polyester blends and others. It is a Sun curable binder. Pidicryl Binder PDN Special is a self-cross-linking acrylic copolymer emulsion used for pigment printing in textile industry. Pidicryl Binder PDN is a self-cross-linking acrylic copolymer emulsion. It is specifically a kerosene based binder used for pigment printing in textile industry. Pidicryl Binder N060 is a new generation binder formulated to give high precision and accurate print designs with excellent colour value. It is the finest emulsion to give an elastic, flexible, and transparent film. Pidicryl Binder HS ECO is an extra soft binder used for pigment printing in textile industry. It gives brilliant and soft handle prints. Pidicryl Binder CIL 100 is a special printing binder used for printing infant wears, cotton, blended fabrics, polyester, and others. Pidicryl Binder BN is an acrylic emulsion with superior running properties. It is used for printing cotton, viscose material, cellulosic/polymer blends, and others. Pidicryl FL 9400 is a self-cross-linking and self-thickening acrylic emulsion. It is used for khadi printing on synthetic fabrics, khadi, pearl, flocking, and others. Pidicryl Binder MMG is a self-cross-linking acrylic copolymer emulsion. It is specially developed for printing gold or silver powders on textile fabrics. BINDER SLN - Properties: 28% - 30% Active Strength, Appearance: Bluish Tint Liquid, Application: Printing Of Pigment Emulsion. GOLD BINDER JARI BINDER Appearence : Milky White Liquid, Application : Silver Printing In Textile. FOAM BINDER - PAPER BINDER
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.