Pvc Cables Suppliers and Manufacturers

Product series:ul2651 Rated temperature:- 30 c to + 105c Rated voltage:300v Test voltage:1500v Insulation material:pvc Conductor material:tinned copper Product standards:ul 758, ul1581 & csa c22.2 Ul2651 pvc insulated flat ribbon electrical cable (300v) Shanghai relico electronics co., ltd. Is a professional high temperature and high performance cable company with research, design, producing and sales, located in jiading district, shanghai, china. Our main products: ul electric wire, teflon wire & cable, silicone wire & cable, rf coaxial wire & cable, shielded cable, mil-spec cable, fire-resistant cable, super flexible cable, cold-resistant cable, and other wire & cable. Our products are mainly supplied to aerospace and military, airport, shipbuilding & navy , railway networks, mining, new energy, automative, power networks, telecom networks, building, machinery and equipment, and special applications. Our products could be widely used in harsh environment, like: high temperature, low temperature, high voltage, strong acid, strong alkali, high oil pollution, strong radiation and strong electromagnetic interference.

XLPE Cable, PVC Cable, Copper Cable, ABC Cable, AAC and ACSR Conductors. Packed in various sizes/weight of wooden/steel drums.

We supply Co-rotating parallel twin screws extruder for PE/PVC /HFFR/ (peroxide and silane based) XLPE cable material compounding. All the raw material will be feed into twin screw extruder first for compounding. Then falls into single screw extruder for cooling down and extrusion. Salient Features of two stage extruder EC65/TDD180 for PVC: 1) Main motor of twin screw extruder 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 400~600kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) One single screw extruder with motor 55kw, L/D=9 8) Air cooling die face cutting system with cyclone and classifier 9) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.

GS-65/150 PVC cable scrap extruder pelletizing line We sincerely advise you GS-65/150 PVC cable scrap extruder pelletizing line with higher capacity, better dispersion effect and completely automatic operation. PVC compound extruder line uses two stage extruders (twin screw extruder+ single screw extruder), which can make sure the granules in good quality. What is more, PVC cable scrap extruder pelletizing line can avoid traditional problems only with twin screw extruder: the material stuck in the die head and the material is overdone. 1. PVC cable scrap extruder pelletizing line Company infomation: Nanjing GS-plus is a professional plastic extruder mamufacturing company; the main products are all kinds of Plastic/Rubber extruders, such as: Twin screw extruder pelletizing line, Single screw extruder pelletizing line Kneader Single screw extruder pelletizing line Conical twin screw force feeder 3D printer filament extruder... 3. PVC cable scrap extruder pelletizing line introduction�? PVC cable scrap extruder pelletizing line production: Feeder ---Twin screw extruder --Single screw extruder-- Air cooling die face hot cutting system PVC cable scrap extruder pelletizing line uses Two stage extruders: Usually the first compounding extruder runs at a high speed for good mixing and high output capacity. The second extruder must be a larger diameter single screw one that can run at lower screw speed . The lower screw can avoid over heating by internal cooling system and strong heat exchange ability. The functional separation allows operator to more flexibly control the expectable material mixing process and temperature 4. PVC cable scrap extruder pelletizing line can also produce: WPC, CPE, masterbatches... 5. PVC cable scrap extruder pelletizing line advantages: Good quality: all uses good quality brand parts, better mixture effect, fully automatic, bigger capacity Good quality pellets Good service: both before and after sales service Many experiences on PVC cable scrap extruder pelletizing line 6. PVC cable scrap extruder pelletizing line contacts: PVC compound extruder pelletizing line, Soft PVC extruder pelletizing line, PVC cable scrap extruder pelletizing line,

GS-65/150 PVC cable recyling extruder pelletizing line We sincerely advise you GS-65/150 PVC cable recyling extruder pelletizing line with higher capacity, better dispersion effect and completely automatic operation. PVC compound extruder line uses two stage extruders (twin screw extruder+ single screw extruder), which can make sure the granules in good quality. What is more, PVC cable recyling extruder pelletizing line can avoid traditional problems only with twin screw extruder: the material stuck in the die head and the material is overdone. 1. PVC cable recyling extruder pelletizing line Company infomation: Nanjing GS-plus is a professional plastic extruder mamufacturing company; the main products are all kinds of Plastic/Rubber extruders, such as: Twin screw extruder pelletizing line, Single screw extruder pelletizing line Kneader Single screw extruder pelletizing line Conical twin screw force feeder 3D printer filament extruder... 3. PVC cable recyling extruder pelletizing line introduction�? PVC cable recyling extruder pelletizing line production: Feeder ---Twin screw extruder --Single screw extruder-- Air cooling die face hot cutting system PVC cable recyling extruder pelletizing line uses Two stage extruders: Usually the first compounding extruder runs at a high speed for good mixing and high output capacity. The second extruder must be a larger diameter single screw one that can run at lower screw speed . The lower screw can avoid over heating by internal cooling system and strong heat exchange ability. The functional separation allows operator to more flexibly control the expectable material mixing process and temperature 4. PVC cable recyling extruder pelletizing line can also produce: WPC, CPE, masterbatches... 5. PVC cable recyling extruder pelletizing line advantages: Good quality: all uses good quality brand parts, better mixture effect, fully automatic, bigger capacity Good quality pellets Good service: both before and after sales service Many experiences on PVC cable recyling extruder pelletizing line 6. PVC cable recyling extruder pelletizing line contacts: PVC compound extruder pelletizing line, Soft PVC extruder pelletizing line, PVC cable scrap extruder pelletizing line, PVC cable recyling extruder pelletizing line

Specifications: Place of Origin: Guangdong, China (Mainland) Brand Name: Ctube Model Number: CT020.38 Type: Junction box Material: PVC, PVC Color: Red,Blue,White Size:: 86X86X38mm Certificated: SGS MOQ: 200pieces / Negotiation Application: Electrical Installation Package Size:42.5x39.5x36.5cm 200pieces/ctn

Description Silicone powder LYSI-100A is a powdered formulation with 55% ultra high molecular weight siloxane polymer and 45% silica . It is recommend to be used as processing aids in various thermoplastic formulations such as halogen free flame retardant wire&cable compounds , PVC compounds , engineering compounds, pipes, plastic/filler masterbatches..etc . Benefits (1) Improve processing properties including better flow ability , reduced extrusion die drool , less extruder torque , better molding filling & release (2) Improve surface quality like surface slip, lower Coefficient of friction, Greater abrasion & scratch resistance (3) Faster throughput , reduce product defect rate. (4) Enhance stability compare with traditional processing aid or lubricants (5) Slightly increase LOI and reduce heat release rate , smoke ,and carbon monoxide evolution Typical applications: For cable compounds, obvious improve processing properties and surface finish . For PVCfilm/sheet to improve surface smooth and processing properties. For PVC shoes sole , improve abrasion resistance . For PVC,PA, PC, PPS high temperature engineering plastics, can improve the flow of the resin and processing properties, promote the crystallization of PA, improve the surface smoothness and impact strength. . How to use Addition levels between 0.5~2.0% are recommended . Strongly suggest to pre-blend LYSI-100A and thermoplastic pellets prior to introduction to extrusion process . Package & Storage 20Kg / bag , craft paper bag ; Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life Original characteristics remain intact for 24 months from the production date , if kept in recommend st

Techinical characteristic 1ã?�Based formula ingredients:PVC powder,the processing oil(DOP,TOTM,etc.)filling powder(calcium carbonate,etc)additives powder(stabilizer,lubricant,etc)functional powder(flow modifier\flame retardant) 2ã?�Basic processing route Each material measuring feeding high speed mixer,processed oil twice to join.The blending material added to the double order machine.through single screw granulation ,packaging .choose water strand or air cooling granulating. 3ã?�Application:high and low temperature of PVC cable materials,high flame retardant cable materials,low smoke no halogen cable material,PVC elastomer ,cold-resistant PVC,injection molding grade PVC,etc.c

Product Details : Network Cable is designed for optimal support of High-Speed data protocols for support frequencies of up to 600 MHz And Cat6a can support up to 100 meters when transmitting 10Gbps.VTech Network Cable is designed to be quick and easy to install the cable requires no specialist installation tools, The Low smoke cable is supplied in box packaging for fast, snag free installation. This VTech cable is numbered from 305 meter to 1 meter to allow quick and easy calculation of the cable remaining in the box and reduce cable wastage. The network cable has a polyethylene cross filler to ensure optimum cross talk performance. Solid Bare Copper Cable, 4 pairs, category 6a, solid. Twisted pairs with FR PVC FR PVC insulation has better fire retardant properties than normal PVC Cable Type : Twisted Pair Patch Panel Type : Cat 6a Color : Blue Cable length : 305 meter Product Features: High-Performance Data Cable 650MHz Bandwidth for Data Applications Category 6a Shielded Twisted Pair Easily Identified Color-Striped Pairs 23AWG Solid Bare Copper 0.56mm Conductors Exceeds TIA/EIA-568B.2-1, ISO/IEC 11801 305mtr (1000ft) in Box Specifications Meets ANSI/EIA/TIA 568, IEC 61156-5 requirements Applications Cable is used for indoor and outdoor applications. Fixed installations, high bandwidth digital applications with low BER and high data rates. Materials: Conductive material: Wire made of Solid Bare Copper Conductor insulation: PVC Aluminum Foil Nylon Cord The cable outer jacket: FR PVC, Blue Color

E-AYY PVC Insulated Cable with Aluminium Conductor This power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

E-AYY PVC Insulated Cable with Aluminium Conductor This power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

Http://www.Xlpecable.Com/zmscable/cable_129_1.Html -