Description LYSI-401 is a pelletized formulation with 50% ultra high molecular weight siloxane polymer dispersed in low density polyethylene (LDPE ). It is widely used as an efficient additive for PE compatible resin system to improve the processing properties and surface quality, such as better resin flow ability , mold filling & release, less extruder torque , lower coefficient of friction , greater mar and abrasion resistance Benefits (1) Improve processing properties including better flow ability , reduced extrusion die drool , less extruder torque , better molding filling & release (2) Improve surface quality like surface slip, lower Coefficient of friction, Greater abrasion & scratch resistance (3) Faster throughput , reduce product defect rate. (4) Enhance stability compare with traditional processing aid or lubricants How to use Addition levels between 0.5~5.0% are suggested . It can be used in classical melt blending process like Single /Twin screw extruders, injection molding. A physical blend with virgin polymer pellets is recommended . Package 25Kg / bag , craft paper bag Storage Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.
Description Silicone powder LYSI-100A is a powdered formulation with 55% ultra high molecular weight siloxane polymer and 45% silica . It is recommend to be used as processing aids in various thermoplastic formulations such as halogen free flame retardant wire&cable compounds , PVC compounds , engineering compounds, pipes, plastic/filler masterbatches..etc . Benefits (1) Improve processing properties including better flow ability , reduced extrusion die drool , less extruder torque , better molding filling & release (2) Improve surface quality like surface slip, lower Coefficient of friction, Greater abrasion & scratch resistance (3) Faster throughput , reduce product defect rate. (4) Enhance stability compare with traditional processing aid or lubricants (5) Slightly increase LOI and reduce heat release rate , smoke ,and carbon monoxide evolution Typical applications: For cable compounds, obvious improve processing properties and surface finish . For PVCfilm/sheet to improve surface smooth and processing properties. For PVC shoes sole , improve abrasion resistance . For PVC,PA, PC, PPS high temperature engineering plastics, can improve the flow of the resin and processing properties, promote the crystallization of PA, improve the surface smoothness and impact strength. . How to use Addition levels between 0.5~2.0% are recommended . Strongly suggest to pre-blend LYSI-100A and thermoplastic pellets prior to introduction to extrusion process . Package & Storage 20Kg / bag , craft paper bag ; Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life Original characteristics remain intact for 24 months from the production date , if kept in recommend st
Description LYPA-208C is a special silicone polymer dispersed in LDPE, It is widely used as an efficient lubricant in XLPE cable compounds . When the dosage at 0.1 to 1.0%, it can improve the processing properties including better mold release, reduced extrusion torque , less die drool ; at a higher loading at 1-5%, It can enhance surface quality such as more slip, lower COF, improve abrasion resistanc....etc Benefits The linear structure of LLDPE will turn into a three-dimensional cross-linking network after Silane-grafting and cross-linking reaction, in this way poor flow of resin result poor processing, and the compounds are easily adhere to the screw groove and mold dead corners and form dead mass which will affect the extruded cable appearance ( rough surface with little pre-crosslinking particles which formed at cross-linking step ), so effective lubricant like LYPA-208C added to improve the processing How to use Addition levels between 0.2~5.0% is suggested . It can be used in classical melt blending process like Single /Twin screw extruders, injection molding. A physical blend with virgin polymer pellets is recommended . For better result , pre-drying is recommend for 1 hour at 70-75 Package 25Kg / bag , craft paper bag Storage Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.
LYSI-04N is a pelletized formulation with 50% ultra-high molecular weight active ingredient dispersed in HDPE. It overcomes the weakness of traditional silicone oil easily to screw slip. A small amount addition can improve the flow of the resin and processing properties. Now it is widely used to improve the lubricity and surface properties of plastic. Features: Improving the processing performance, less extruder torque, reduced equipment wear, better mold filling and reduce product defect rate Obvious lower the coefficient of friction, improve surface smoothness, gloss, enhance the surface silk texture, scratch and abrasion resistance. Enhanced fuel resistance, reduced smoke density, improve the impact strength . Good stability, non-migratory and surface without precipitation. Applications: (1) Silicone core pipe / Optic fiber duct / PLB HDPE pipe (2) Large diameter pipe (3) Packaging boxes, bottles ( to improve the surface smoothness ) (4) PE plastic sheets How to use Addition levels between 1.5~5.0% are suggested . It can be used in classical melt blending process like Twin screw extruders, injection molding. A physical blend with neat polymer compounds is recommended . Package 25Kg / bag , craft paper bag Storage Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life Original characteristics remain intact for 24 months , if kept in recommend storage.
Description LYSI-306 is a pelletized formulation with 50% ultra high molecular weight siloxane polymer dispersed in Polypropylene (PP ). It helps improve long-lasting anti-scratch properties of automotive interiors , by offering improvements in many aspects like Quality, Aging , Hand feel, Reduced dust buildup... etc. Suitable for variety of Automotive interior surface , such as : Door panels, Dashboards, Center Consoles, instrument Benefits (1) Improves the anti-scratch properties of TPE,TPV PP,PP/PPO Talc filled systems. (2) Operates as a permanent slip enhancer (3) No migration (4) Low VOC emission (5) No tackiness after laboratory accelerating aging test and natural weathering exposure test How to use Addition levels between 0.5~5.0% are suggested . It can be used in classical melt blending process like Single /Twin screw extruders, injection molding. A physical blend with virgin polymer pellets is recommended . Package 25Kg / bag , craft paper bag Storage Transport as non-hazardous chemical. Store in a cool , well ventilated place . Shelf life Original characteristics remain intact for 24 months from the production date , if kept in recommend storage
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Silicon Metal 441 (Powder)
Ferro Silicon (FeSi)
