MODEL IW - 0981T (3/8" SQ. DRIVE) Square Drive 3/4" Bolt Capacity 1/2"(13mm) Max Torque 280FT-LB (39KG-M, 380N-M) Free Speed 10000 r.p.m. Air Consumption 3.7 cfm Air Inlet 1/4" Air Hose 10 mm Overall Length 170 mm Net Weight 1.2 kg
A compact magnet system consisting of a steel shell with high permeability and a countersunk magnet is a countersunk pot magnet (also known screw - on pot magnet). The cup magnets with countersunk hole are easy to install. The countersunk cup magnet has a single attraction surface, and the magnetic lines of force are more concentrated. The bolt with a countersunk head is flush with or below the top of the magnet, which optimizes the suction surface of the countersunk pot magnets. Neodymium, ferrite, and smco magnets are all available for our countersunk pot magnets.
Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.
Lithium battery Rail impact wrench machine Double lithium traveling cantilever power wrench (model: LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations
Bicycle parking has an additional bracket for supporting the frame, which provides maximum stability. Bicycle parking, produced by the Rud E. S. company, has an option with the possibility of placing two bicycles. Arrangement of bicycle parking is possible both to a solid base with anchor bolts, and to an unstable base by concreting. Powder, polymer painting. Color according to the RAL catalog.
Modern climbing formwork systems consist of large wall forms mounted on climbing scaffolds. As part of the first concrete pour, the climbing supports are attached to pre-set anchor bolts. This ensures the transfer of wind and constant loads from the wall formwork and supports. The formwork also used two climbing brackets to create a working platform to align and support the panels. After pouring the concrete, the lifting boots and screws were installed. Both the climbing platform and the formwork were then lifted to a new suspension point for the next pouring cycle.
G-TOP stocks a wide range of bucket teeth and adapters for excavators. Almost all bucket teeth and adapters are cast products, hardened to be more wear resistant than carbon steel. The adapters are sized to match the tooth size. the size is based on the thickness of the frog or base edge. most adapters are welded, but we offer a variety of bolt-on adapters to choose from.
Basic specification of stainless steel water tank: Material: Stainless steel SUS304 or SUS316 Water Tank Volume: 1-1000CBM Stainless Steel Panel Size: 1.0m*1.0m, 1.0m*0.5m,0.5*0.5m Stainless Steel Panel Thickness: Wall board thickness: 4mm,6mm,7.5mm,8mm,10mm and etc. Accessory:Water inlet and outlet,Bolts,Steeling tapes,Draw rod,Flange connection,Ladder,Base channel(C channel)etc. Water Tank size: can be produced according to customer's size
Krishna Industries is a leading acrylic toothbrush holder manufacturer and supplier based in Rajkot, India. We provide wall mounted self-adhesive acrylic toothbrush stand or tumbler for bathroom accessories, made from high grade acrylic sheet with stainless steel rails.
The acrylic soap dish manufacturers in India use tough and durable acrylic substances to make bath systems and accessories. It can enhance the allure of your bathroom area vitally when you installed acrylic soap holder in your bathroom wall.
Krishna Industries is a trusted acrylic shelf manufacturer and supplier in Rajkot, India. We provide durable and unbreakable acrylic wall mounted shelves for bathroom, clear acrylic shelves and acrylic floating shelves that give your bathroom a classic look.
Krishna Industries is an industry leading acrylic corner shelf manufacturers and supplier in Rajkot, India. We provide acrylic bathroom corner shelf in different colors and sizes of 8x8, 10x10 and 12x12 inches.
Hydraulic transmission, static torque stepless adjustment tightening torque; Accurate and constant output torque ensures accurate fastening of the sleeper nut; High speed tightening at low torque, increased resistance torque, automatic Switch to high torque low speed; Torque visual display, night lighting (using LED hair Photodiode), convenient and efficient; The machine is powered by gasoline engine and carried out by hydraulic system Drive and precise control, is the railway new and old lines, special Especially the high-speed railway line is very suitable for construction and maintenance Trade machinery; The machine hydraulic system adopts advanced technical principle, Achieves high speed tightening when the torque is small, and increases when the drag torque Large to a certain automatic switch to large torque low speed, so that the liquid The pressure wrench can output more tightening torque; The mechanical part of the hydraulic wrench wear will not be affected Hydraulic wrench accurate tightening torque output and display; double head wrench, high efficiency, operation and adjustment The section is very convenient and light in weight. The nut sleeve adopts 10,000 The floating mode makes it easier to insert or detangle the sleeper Mother, sleeve stroke is convenient to change; This machine is suitable for the construction and maintenance of various specifications sleeper nuts and bolts (including rectangular bolts) of various types of railway rail.
Crankcase Precision cast oxidation treated surface ofthe crankcase. High and low pressure water seal components The high and low pressure water seal design of the "U" type "Nbr/Com/Buna N" material enhances the performance of the water pump and improves its service life. The plunger support guide ring ensures the coaxiality of the plunger, extending the service life of the water seal and plunger. Pump head assembly Selected stainless steel material, new andefficient structural design, high strength, no pores, long service life, andsafe operation. Reinforced 8-bolt fastening, 18mm, grade 12.9. Pommel Precision machined hard solid ceramicplungers, as well as thickened SST limit bolts, provide longer service life,better durability and applicability. Bearing Large tapered ball bearings ensure theconcentricity of the crankshaft connecting rod and ensure stable operation ofthe water pump. Crank axle Precision forging process and hardeningtreatment ensure the strength, service life, and durability of the crankshaft. Plunger connecting rod Super strong alloy material, splitstructure, higher load strength, longer service life, ensuring safe and stableoperation. Adual cylinder engine with strong horsepower and key start. Standard fitting Pipe coiler
Product Overview: Copper Injection Molding (CIM) parts are high-precision metal components produced using the metal injection molding process. Using copper as the raw material, copper powder is mixed with a binder to form an injectable slurry, which is then injected into molds. Under high-temperature and high-pressure conditions, the slurry is molded and sintered to produce intricately shaped and precise copper parts. This manufacturing method enables efficient production, resulting in parts with excellent mechanical properties, thermal conductivity, and corrosion resistance. CIM parts find widespread applications in industries such as electronics, automotive, and aerospace. Manufacturing method: Copper injection molding Related Materials: Pure Copper,Brass,Red copper brass,Tungsten copper Advantage: Mass production of complex shape copper part which costs significant amount of working hours with CNC machining is realised by MIM. Application: Thermal Management Part
Code: SWC-KFR- 1002 MATERIAL: IFR - 93% Metaramid with 5% Para Aramid and 2% antistatic fiber. INTERNATIONAL STANDARDS: EN 11611, EN 11612, EN 61482, Garment Certified NFPA 2112, NFPA70E COLORS: Navy Blue, Royal Blue, Red, Orange, Yellow, Turmeric Yellow, Khaki. SIZE - XS,S,M,L,XL,2XL,3XL,4XL,5XL,6XL FEATURES: Flat coat collar Two flap chest pockets with snap buttons. Pen pocket on left sleeve Two back pockets, one with flap Tool pocket on right leg Two trouser pockets. Elasticized back. Hanger loop on collar Concealed snaps on cuffs and ankle openings Concealed two-way heavy duty FR brass zip with brass snap closure. FR Reflective tape on arms and legs. Bartacking done in places where more strength is needed to support extra load.
Code: SWC 3005 Material: 100% Cotton OR Polyester and Cotton blend SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Flat coat collar Two cut pockets on chest with concealed heavy duty industrialgrade (brass/Nylon) zip fastening. Two patch pockets on back Two-way concealed heavy duty industrial grade (brass/nylon) zip fastening. Pen pocket on left sleeve Elasticized back Side vents Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
O-type coil 160 3.55 GB 3452.1) 5303010116000355 07 O type coil 175 3.55 GB 3452.2) 5303010117500355 07 Seal ring / oil seal ring AH0801010404 AH34001-04.06A Seal ring / oil seal ring AH1001010404 AH33001-04.06A Fender plate AH0801010405 AH34001-04.07 Fender plate AH1001010406 AH33001-04.08 Intermediate pull bar AH0801010406 AH34001-04.08 Intermediate pull bar AH1001010407 AH33001-04.09 Cross pin AH0801010407 AH34001-04.09 Cross pin AH1001010408 AH33001-04.10 Bolt M20X50 420201011120050000 Bolt M24X65 T502-7006K T52-7006K Lower guide plate AH0801010408 AH34001-04.11 Lower guide plate AH1001010409 AH33001-04.12 Fastening plate AH0801010409 AH34001-04.12A Fastening plate AH1001010410 AH33001-04.13A O-type coil 128 7 GB 3452.1) 53030101128007000 7 O-type coil 140 7 GB3452.1) 53030101140007000 7 Locking spring AH0801010410 AH34001-04.15 Locking spring AH1001010411 AH33001-04.16 O-type coil 103 5.3 GB 3452.1) 53030101103005300 7 O-ring 115 5.3 GB 3452.1) 53030101115005300 7 Gasket group AH100101041700 AH36001-04.03A.00 Seal gasket AH0801010411 AH34001-04.19 Seal gasket AH1001010413 AH33001-04.20 Cross pin baffle AH0801010412 AH34001-04.20 Cross pin baffle AH1001010414 AH33001-04.21 Cross head bearing 4G254735Q) AH0801010413 AH34001-04.21 Cross head bearing 5G254936Q) AH1001010415 AH33001-04.22 Pipe joint 3/8 "X2" AH1001010405 AH33001-04.07 Double lip oil seal 4 "x 5" x 0.5 " AH0801010414 AH34001-04.23A Double lip oil seal 4.5 "x5.5" x 0.5 " AH1001010416 AH33001-04.24A Adjusting gasket AH08010118 AH34001-20 Adjusting gasket AH1001010418 AH33001-04.25A Intermediate rod bolt M20X50 T502-7011 T52-7011K Intermediate rod bolt M24X65 T502-6005K T52-6005K Pinion shaft AH0501010302 AH35001-03.02A Pinion shaft AH0801010302 AH34001-03.02A Pinion shaft (wide groove) AH1001010302 AH33001-03.02A Wear resistant sleeve AH0501010303 AH35001-03.03 Wear resistant sleeve AH0801010303 AH34001-03.03 Wear resistant sleeve AH1001010303 AH33001-03.03 End cover AH0501010304 AH35001-03.04 End cover AH0801010304 AH34001-03.04B
The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Output shaft:3/4"Quadrilateral axis No-load speed:1800r/min Impact frequency:2400bpm Maximum torque:2000N.m Net weight:3.7Kg Bolt specification:M16-M36 Delivery time:30 days for OEM,15 days for ready goods Payment method:T/T,L/C Standard accessory:BMC BOX*1,battery*2,charger*1
The full range of 16v and 20v brushless systems gives you variable speed control and a safe braking system with a versatile battery and allows for a large number of charge cycles Battery voltage:20v Output shaft:3/4Quadrilateral axis No-load speed:1800r/min Impact frequency:2200bpm Maximum torque:1500N.m Net weight:3.5Kg Bolt specification:M14-M30 Delivery time:30 days for OEM,15 days for ready goods Payment method:T/T,L/C Standard accessory:BMC BOX*1,battery*2,charger*1
