From 5kw to 250kw
Blower and industrial fan.
From 0.5 HP to 350 HP.
The fan is made by German Pollrich Ventilatoren GmbH in year 2004 and it has been as a back-up emergency fan which has practically newer used and therefore the unit is new like condition. This fan was designed to blow explosive air/gas mixture (VOC) and therefore it fulfills category II 2G, temperature class 1 ATEX 95 norm of explosive proof design. The motor and fan are built on a common heavy duty frame and they are connected with a flexible coupling. Technical data: Manufacturer: Pollrich Ventilatoren GmbH Year of manufacture: 2004 Fan type: VR50S11C1UK0900LG360MMUU Manufacturing no: 123665 Volume: 10.55 m3/sec (37980 m3/h) Max press difference: 8000 Pa (0.08 Bar) Speed: 2980 RPM Max gas temperature: 80 C Power requirement: 104.6 kW Electric motor: CEMP 132 kW / 2970 RPM Type: AC70 315M 2 Classifications: II 2 G EEXd IIC T4 IP 55.
Road Project Rig:Apply to be using on open and no power site, such as the Plaza, Highway, workshops and other large-scale drilling operations on the ground, not fixed, mobile convenience, continuous work.Maximal Hole to 400mm Vertical Rig: Easy to use, light weight, big horsepower, high-speed, short-time overload of work, applicable to the most moving working condition for every size holes. Hand Rig:Flexible and applicable to the various locations of the drilling operations. Such as decoration, household appliances installation, plumbing etc. Provides many kinds of international, advanced brand slurry pumps, SeriesAH, ZGB, ZJ Our experts will be your reliable consulters to give consultive suggestions and precise selection on performance parameter, construction, materials, etc. It can let the slurry pumps from us have a better service for industries of mining, metallurgy, coal preparation plant, ash-handling at power plant, etc.
Centrifugal Pumps: High-quality, cast-iron, single-stage horizontal centrifugal pumps with a mechanical sealing system. The pumps are specially used in deep water-wells for draining gravel, sand and mud out of the deep water-well. We have two types of centrifugal pump: -Small Centifugal Pump- Dimensions:80x48x55 cm Weight: 145kg Operating Cycle: 1200-1300 c/m - 50kW Application Depth: 250-300 mt. Inlet-Outlet diameter : 4 Operation Pressure: 4,5 Bar Capacity: 200 t/h -Large Centrifugal Pump- Weigth: 230kg Operating Cycle: 1200-1500 c/m - 35kW Application Depth: 450 mt. Operating Pressure: 3,2 Bar Inlet-Outlet dia. : 4 Capacity: 200 t/h Wooden Box.
Gold Centrifugal Concentrator is a new type of gravity mineral processing device., It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, but also used to recover gold from the old tailings. It is widely applied on recovering free gold in all particle size ranges, especially for recovery of fine gold which is lost during the operation of the gravitational concentrators (sluice boxes and jigs). Test showed that the machine is very effective for separating monomer gold in vein gold deposits as replacement of mercury plate. the recovery can be as high as 99%, The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. Especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of ¡ª0. 074mm, the recovery for the natural gold is expected up to 98%. For those natural gold of 0.004mm in particle size, the recovery is 97% The gold centrifugal concentrator can treat particle sizes from below 10 microns up to a maximum of 6mm and is most commonly used for recovery in Gold and Platinum. Other recovery uses include Mercury, Palladium, Tantalum, Copper, Silver and Diamond Indicator Minerals. Structure and Working Principle The machine is operated by motor via belt driving draft to make liner rotate at a high speed. Slurries are delivered to liner through feed pipe and are subject to stronger process of separation under the action of centrifugal force. Heavy mineral remains in the lattice chute of liner and light mineral is drained via tailing chute. Concentrate is discharged through outlet after one shift operation and shutdown of the machine. Technical Parameters Model Power Capacity Slurry water Jet water concentrate Kw t/h L/min L/min Kg/shift STLB20 0.75 0.5~1.0 16 30 1~2 STLB30 2.2 2~3 120 80 8~15 STLB60 4.0 10~12 400 250 20.
- Combined function of washing, spin-drying, concentration and filtering -Touch-pad design, all digital display for simple handling and clear display -Programmable speed and time -Special vibration-absorbing combination for automatic balance and lowest noise -Eliminate most re-spins -All stainless construction -Light weight and high efficacy -Drying degree above 90%
Natural Rubber, which is obtained predominantly from the rubber tree, Hevea Brasiliensis, is an aqueous colloid of rubber containing 30-40% rubber, by mass. Getting the rubber in a dry form is a specialized process in itself. The raw is concentrated, i.e., its % rubber content is increased and proportion of non-rubber constituents is reduced by processes such as centrifuging and creaming.
Centriful blower/centrifugal fan/blower plastic scroll housing, ball bearing,forward curved impeller (galvanized sheet steel) Available size: 146mm,160mm,225mm,320mm Voltage 230v Frequency 50/60Hz Airflow(m3/h) 900 Speed(RPM) 1800 Power(w) 310 The parameter can be adjusted.
Features: *Mental housing is sturdy and durable. *Auto-balancing system can extend motor life and reduce noise. *With safety interlock, it can prevent the lid from being opened during operation. *Forced fan air convection prevents the motor from overheating. *Precision digital time can be set from 0 to 30 minutes with 30 sec. increment. *DSC-301SD can offer short runs by pressing the function key. *LED digital display enables users to monitor the present speed value or the remaining time. *Automatic brake system can offer rapid deceleration. *DSC-301SD features a see-through window. *The lid will be opened automatically once the rotor stops spinning. *Quality certification: ISO 9001, ISO 13485.
Concentrator is kind centrifugal concentration equipment. It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation. It is also used to recover gold from the old tailings. Three models are available. Application shows that the recovery can be as high as 99%, especially for the case in recovering the natural gold in lode ore with 65% of the ore having a milling size of í¬0. 074mm, the recovery for the natural gold is expected up to 98%. For that natural gold of 0.004mm in particle size, the recovery is 97%. The cleaning up cycle is 1~4 hours, and the upgrade ratio is up to 1,000 times. The equipment is patented in China.
Steel and aluminum body centrifugal fans are available with external rotor motor.
Centrifugal end suction process pumps for industrial use in various material of constructions like cf8m, cf8, c.I., alloy 20, sanicro-28, haste alloy c, wcb etc., with capacities up to 500m3/hr with heads up to 100mtrs and temperature limits upto350 degree celsius with sizes from 25mm to 150mm
It is a vertical high speed tubular separator, generating huge centrifugal force. It is used for continuous separation of two immiscible liquid having different specific gravities and for clarification of liquid.
These pumps are stainless steel centrifugal monobloc and bare pumps(coupled). These pumps are made from ss-304 or ss-316 sheet. The pumps are precisely fabricated . These pumps wetted parts are of stainless steel and widely used in chemical and process industries. As these pumps are fabricated from steel , it is also wedely used in dairy, food and bevrages industries, wine , ro and dm plant , sea water applications. These pumps are available from 0.25 hp to 30 hp . Head up to 90 meter and capacity up to 3000 lpm. The unique feature is international quality at affordable price with minimum delivery period. Wooden packing
Industrial centrifuges We manufacture following range of industrial centrifuges. (1) Three point suspended – manual top discharge (mtd) centrifuges. (2) Three point suspended - lifting out filterbag (lb) centrifuges. (3) Three point suspended – bottom discharge (bd) centrifuges. (4) Horizontal basket, peeler type (h) centrifuges. (5) Horizontal basket, pusher type (p) centrifuges. (6) Top suspended, top driven, bottom discharge (tsb) sugar centrifuges. (7) Decanter type (d) centrifuges. (8) Reversing filterbag type (inv) centrifuges. (9) Washing – in place type (wip-mtd) centrifuges. (10) Nozzle type liquid separator (lsr) centrifuges. The aim is to design & manufacture centrifuges to suit exact requirement of customer. Being precisely engineered and manufactured to exacting industrial standard, our centrifuges give long trouble free operating life.
Size: 120mm~146mm
Refrigerated centrifuge Dl6mb large capacity refrigerated centrifuge Widely used in the field of pharmacy, biologic product and central blood station. Technical parameter 1dl6mb use the high torque dc brushless motor, no need to maintain, no powder pollution, quick in speed raising and reducing. 2quick in refrigeration. 3microprocessor control, digital display, operated by programming, convenient in operation. 4use the advanced rotor automatic identification system, electronic lock, over speed, over temperature and imbalance automatic protection, 3 tiers of protection steel cover, safe and reliable. 5various kinds or adaptors available. Max speed6000r/mintemperature range-20~40¦ noise q65dba Max rcf6680gtemperature accuracy+2¦dimension 8307301220mm Rotor identificationautomatic identificationspeed accuracy+50r/mincapacity 6500ml angle rotor 61000ml swing rotor Weight 260kgtime range0~9h59minpower ac220v 50hz 30a Standard export package
Centrifugal pump
