Ferrosilicon is often used as deoxidizer in steel making, and it is also beneficial to improve the temperature of molten steel when it is produced with a large amount of heat during the generation of SiO2. Silicon also can be used as an alloy element joining agent, widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, silicon in the ferroalloy production and chemical industry, commonly used as a reducing agent. Grade SI Al P S C CR TI Packing FeSi75A 74.0-80.0 - 0.035 0.02 0.1 0.3 - As clients demands FeSi75B 72.0-80.0 - 0.04 0.02 0.2 0.5 - FeSi65 65.0-72.0 - 0.04 0.02 - 0.5 -
Fesi75% si 75%, c 0.1% max, al 1.5% max, p 0..035% max, s 0.025% max Size: 10-50mm 90% min Inspection: ciq Quantity: 100*500mt *3 months 1mt bag
Fesi75% si 75%, c 0.1% max, al 1.5% max, p 0..035% max, s 0.025% max Size: 10-50mm 90% min Inspection: ciq Quantity: 100*500mt *3 months Http://ferroalloy.Raintreeintl.Com 1mt bag
Ferrosilicon� is an alloy of iron and silicon that is made by reducing silica in the presence of iron, and which plays an essential role in steelmaking. Silicon iron, also known as ferrosilicon, is a ferroalloy composed of iron and silicon, with a silicon content ranging from 15% to 90%. It is commonly used as a deoxidizer in steelmaking and as a reducing agent in ferroalloy production and the chemical industry. In the steelmaking industry, approximately 3-5 kg of 75% ferrosilicon is consumed to produce one ton of steel. Ferrosilicon can also be used as an alloying element additive, which is widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel, and electrical silicon steel. Ferrosilicon is also used in the production of cast iron, as it helps to control the initial content of silicon in the melt, which is important for the microstructure and properties of the final product. Ferrosilicon cast magnesium is an alloy that contains magnesium and is used as a nodulizer in the production of ductile iron. It has a big mechanical strength, and the effect of deoxidization and desulfurization is strong. Modifiers are added to molten metal to change its properties, and ferrosilicon is one of the most commonly used modifiers in the production of cast iron. The material forming the base Ferrosilicon analysis ferrosilico cast magnesium and modifiers. The role of Ferrosilicon in Steelmaking: In steelmaking, Ferrosilicon is used for:
Ferrosilicon FS10 Lumps dimentions: 0-800 mm Quality indexes: Fe (75-88), Si (8-12.5), Al (0.5-2.0), C(0.4-2.0), Ti(0.3-3.5), S(0.08-0.25), Cu(0.03); Lumps use: Ferrosilicon FS10 for the foundry and engineering industry. Ferrosilicon FS10 is a ferroalloy, the main components of which are metals such as iron and silicon. Ferrosilicon is used as a deoxidizing and alloying additives for the smelting of electrotechnical, spring, corrosion and heat-resistant steels. Quantity available : 2500t Packing: big bags
Ferrosilicon is a ferroalloy composed of iron and silicon. Ferrosilicon is an iron-silicon alloy made of coke, steel chips, quartz (or silica) as raw materials and smelted from an electric furnace. Ferrosilicon is often used as a deoxidizer in steelmaking, and it is also beneficial to increase the temperature of molten steel while deoxidizing. At the same time, ferrosilicon can also be used as an alloying element additive, widely used in low-alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, ferrosilicon in alloy production and chemical industry, commonly used as a reducing agent
We supply #ferrosilicon at competitive prices. Si: 70-75 % Al: 1.2-2 % C: 0.15-0.2 % P: 0.05-0.04 % S: 0.05-0.03 % Size: 10-60 mm
Ferrosilicon is rich in silicon elements, silicon as an important raw material in steelmaking can treat oxygen in steel, thus reducing the production of oxides, significantly reducing impurities in the molten steel, and promoting the flow properties of the molten steel, causing changes in the form of inclusions and floating on the surface of the molten steel, thus improving the purity and quality of the molten steel. The elemental silicon in Ferro Silicon 75# is â?¥75%, which is a common smelting material in steel mills. We strictly screen the raw materials, use staff with rich experience in production, and conduct laboratory tests on the Ferro Silicon 75 we produce to ensure the quality of our products. We have a rich transportation system to deliver Ferro Silicon 75% to all over the world, if you need it, I believe we are the best choice for you. Contact us soon and we will present you with a daily ferrosilicon quote!
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Ferrosilicon(FeSi) is made from semi-coke, silica, steel chips, and other products as raw materials, and is smelted by continuous operation in an open or semi-closed reduction furnace. The main uses of ferrosilicon are deoxidizers and alloying agents for steelmaking, inoculants, and nodularizing agents for cast iron, and are also widely used in magnesium metal and chemical industries. Ferro Silicon Grade: FeSi75/ FeSi72/ FeSi70/ FeSi65; FeSi45/ FeSi15. The appearance of ferrosilicon is silver gray with a metallic luster, which can be processed into ferrosilicon powder, ferrosilicon lump, or ferrosilicon granule according to customer requirements. Chemical Composition of FeSi: Si, Al, Ca, Mn, Cr, P, S, C, Fe, and other elements.
Various models can be customized 1.ferrosilicon particles are used as deoxidizer and modifier in cast iron industry; 2.ferrosilicon particles are used as weighting agent in beneficiation; 3.ferrosilicon particles are used as coating for electrodes; 4.ferrosilicon is used as a reducing agent in the ferroalloy industry.
1.Chemical compositon(%) Re: 21.0-42.0 si:44-37 mn:2.0-2.5 ca:4.0-5.0 ti: 1.0-2.0 fe:balance 2.Melting point:1080-1250 3.Proportion: 4.7-5.4 4. Size:0-5mm, 5-50mm, 50-150mm 1mt/bag
Ferro Silicon used quartz(or silica)as raw material is made by electric furnace, because silicon and oxygen are easily compound into SiO2, the Ferro Silicon is often used as deoxidizer in steeling. It also can be used as a suspended phase in the mineral processing industry and coating for welding electrodes in the electrode manufacturing. According to the content of Silicon, this product can be divided into FeSi with the Si content Application : 1. Ferrosilicon is often used as deoxidizer in steel- making. 2. Ferrosilicon also can be used as alloy elements join agent, which is widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon-steel. 3. It can be used as a reductant in ferroalloy production and chemical industry. 4. In iron industry it can be used as inoculant and nodulizer.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Model Chemical Composition% Si Mg Ca Re Ba La Fe BN-126 38-44 6-7.5 1.0-3.0 1.8-2.5 - balance BN-127 38-44 6.3-7.5 2.0-3.5 2.5-4.0 1.2-2.0 balance BN-137 38-44 6.3-7.5 1.0-3.0 2.5-4.0 - balance BN-138 38-44 7.0-9.0 2.0-3.0 2.0-4.0 - balance BN-158 38-44 7.0-9.0 2.0-3.0 4.0-6.0 - balance BN-101 44-48 5.6-6.5 0.8-1.2 - ï¼?2.0 proper balance BN-104 44-48 5.5-6.5 1.0-1.5 0.4-0.6 proper balance Standard Size: 0.6-6mm,1-12mm,5-25mm,4-30mm Packing: 25kg woven plastic bag in 1mt jumbo bag. Note: Chemical composition, size and packing of above mentioned products can be adjusted according to customer's requirements. Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.
Characteristics 1.Ferro Silicon Magnesium Alloy is shaped in gray lump with metal luster. It is solid and brittle so that it is easy to be smashed. 2.With stable reaction, the absorption rate of Mg. will be increased which is helpful for getting high-quality casting products. 3.High mechanical strength and strong deoxygenation and desulfuration effects.