EN590 low sulphur price is $-NEGOTIABLE discount from Platts NWE ARA I'''ll provide procedure of seller refinery by email. Procedures of refineries are fair and easy and the seller can meet the buyer after the buyer confirms their acceptance of the procedure.
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
L/C ,DLC, SBLC payment is accepted, NO upfront, pre-payment. Minimum Order Quantity is 100k/mt if spot. We are one of the most precise on non-sanctioned supply due to strict requests of our clients. We are in direct colloboration with reputable sellers,resellers,retailers,manufacturers and also well known refineries within our portfolio. Both as buyer and seller according to the necessarities in our partnerships.
EN590 Diesel is an ultra-low sulfur diesel fuel designed for modern diesel engines. It offers: Minimal sulfur content for reduced emissions. High cetane number for efficient combustion. Enhanced lubricity for engine protection. Cold weather performance. Compatibility with emission control systems. Excellent storage stability. This clean-burning fuel promotes environmental responsibility and optimal engine performance.
En590 10 , D6 , Naphtha , Jetfuel, Nigerian Crude, Petcoke, and Iron Ore ( Mexico origin ).
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
Available in Hamriyah - Sharjah, Diesel En590 PPM1000 QTY: 45,000 MT Price: $680/MT Requirements: SGS and MT103 Diesel En590 PPM1000 And Others PPM Ultra Low Sulphur are petroleum products derived from crude oil (petroleum) and processed in oil refineries. The diesel En590 PPM1000 or Grade D Gas Oil is red diesel that is distinguished by a 1000ppm sulphur content and red dye and is used in older machinery and boilers. The sulphur content comes from the element that's required for lubrication purposes pre-2011.
En 590 Gas Oil Is A Gas Oil With A Sulfur Concentration Of 10 Ppm. It Has A Higher Cetane Number Than A2 Class Gas Oil (another 10ppm Sulphur Content Class Of Red Diesel), Making It More Suited To Internal Combustion Engines In Off-road Cars. The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure. Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding. Seller Working Procedures, Terms, And Condition. Fob Price: Us$610.00 -- $620 Per Metric Tons (negotiable) Origin: Kazakhstan Key Specifications/Special Features: TEST UNITS METHOD RESULT Density at 15 C Kg/m2 EN ISO 12185 845.0 API gravity Kg/L ASTM D 1250 34 Ash content %m/m EN ISO 6245 0.01 Flash point C EN ISO 2719 Above 55 Sulphur content Mg/Kg EN ISO 20884 10
Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)
We sell Oil and Gas Products Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6
Petroleum products, en590 10ppm diesel, en590 diesel, jet a1, aviation fuel, jet fuel, d2 diesel, d6 diesel, petroleum coke, crude oil.Trade consultancy & representation
"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply: Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels. Key characteristics of Diesel D6 may include: High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery. Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards. Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates. Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed. For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries. Origin: Kazakhstan / Russia.