IPS-12R The IPS-12R Syringe Pump is a highly versatile and precision-engineered device designed to meet the demanding requirements of fluid handling across various industries. With its advanced features and robust construction, the IPS-12R offers unparalleled reliability and performance. Key Features: Wide Range of Syringe Compatibility: The IPS-12R accommodates syringes of different materials, including glass, plastic, and steel. Its adjustable configuration allows for the use of syringes ranging from Hamilton 0.5 �¼l to Monoject 140 ml, providing flexibility for various applications. Precise Flow Control: With a wide flow rate range from 17.89 picoliters per minute to 121.51 milliliters per minute, the IPS-12R ensures accurate and consistent fluid delivery. Its stepper motor, combined with a microcontroller featuring Microstep Drive technology, enables precise control over flow rates, guaranteeing reliable performance even in the most critical tasks. Intuitive Interface: Equipped with a 4.3-inch Resistive Touch TFT LCD screen and powered by user-friendly microcontroller software, the IPS-12R offers an intuitive interface for easy programming and monitoring. Users can adjust flow rates and other parameters effortlessly, enhancing operational efficiency. Adaptive Pumping: The IPS-12R features adjustable flow rates even during the pumping process, allowing users to fine-tune parameters as needed for optimal performance. This adaptability ensures versatility in handling diverse fluid handling tasks with precision and control. Technical Specifications: Motor Type: Stepper Motor Linear Force Connectors: Yes Recipe Save-Recall: Yes (Wi-Fi optional) Power Supply: 12 VDC 1A (110-240 VAC adapter included) Dimensions: Width (W): 200 mm, Length (L): 170 mm, Height (H): 137 mm Weight: 2.2 kg Environmental Specifications: Operating Temperature: Between -10°C and 50°C Storage Temperature: Between -30°C and 85°C Operating Humidity: RH 10% RH 90% (not condensed) Storage Humidity: RH 10% RH 90% (not condensed) Additional Features: Wi-Fi connectivity (optional) With its comprehensive features, precise performance, and user-friendly design, the IPS-12R Syringe Pump stands as a reliable solution for fluid handling needs in various industries, ensuring efficiency, accuracy, and control in every operation.
Copper tubes come in various grades, each with specific properties suited to different applications. The most common grades of copper tubes include: ASTM B88 (Type K, L, M): Type K: This grade of copper tube has thick walls and is typically used for underground water services and distribution. Type L: Type L copper tubes have medium thickness walls and are commonly used for residential water supply lines, refrigerant lines, and heating systems. Type M: Type M copper tubes have thin walls and are suitable for general residential and commercial plumbing applications where pressures are relatively low. ASTM B280: ASTM B280 copper tubes are seamless, drawn-copper tubes used for refrigeration and air conditioning systems, as well as in heating applications. These tubes are available in various tempers, such as annealed (soft) and drawn (hard), to suit different installation requirements. ASTM B75 (Type K, L): Type K: Similar to ASTM B88 Type K, these tubes have thick walls and are commonly used for underground water services and distribution. Type L: Similar to ASTM B88 Type L, Type L tubes have medium thickness walls and are suitable for residential water supply lines and refrigerant lines. ASTM B88 (Type ACR): ACR (Air Conditioning and Refrigeration) copper tubes are specially designed for use in air conditioning and refrigeration systems. These tubes are typically annealed for ease of bending and are available in various sizes to accommodate different system requirements. ASTM B819: ASTM B819 copper tubes are seamless copper tubes specifically designed for medical gas systems. These tubes are cleaned and capped to meet stringent purity requirements for medical gas applications. Copper-Nickel Alloys: Copper-nickel tubes, such as CuNi 90/10 (90% copper, 10% nickel) and CuNi 70/30 (70% copper, 30% nickel), offer excellent corrosion resistance and are commonly used in marine and offshore applications, as well as in heat exchangers and condensers in aggressive environments. These are some of the commonly used grades of copper tubes. The selection of the appropriate grade depends on factors such as application requirements, operating conditions, and regulatory standards. It's important to consult with suppliers or engineers to choose the right grade for your specific application needs.
New electric outboard powerfull 6hp outboard motor for boat electric motor inboard catamaran, Electric Outboard Motors, Boat Motors Supplier Golden Motor Technology Co., Ltd. Price $2380.00 Availability: In Stock Mini Order:1 Peak: 20kw Rated Power: 10kw Efficeincy:91% Phase Resistance (Milliohm):3.1/48V; 6.0/72V; 18.0/120V Phase Induction(100kHz):34uh/48V; 77uh/72V; 252uh/120V Weight: 17kgs Cooling:Liquid Cooling Transport Package:Carton Specification: CE, ISO9001 Origin: China HS Code: 85114099 Production Capacity 2, 500 PCS/Year Engine Position: Outboard Condition: New Voltage: 48V/72V/96V/120V Boating with EZ Outboard is Fun, Pleasant, Easy for EVERYBODY! EZ of Use. Clean. Quiet. Light. Efficient. Safe. Reliable. Affordable A growing number of boat owners favour electric propulsion to power their recreational boats, dinghy, kayakers, tender boats, fishing boats, catamaran, pontoons and cruisers. Electric propulsion outboard makes boating experience very fun and pleasant thanks to the ease of use, absence of engine noise, gas fumes and vibrations, and the bilge stays nice and clean with no oil or grease fouling the timber. With 90% fewer moving parts there is little that can wear out or break down, making electric motors a reliable and viable option for small boats. EZ outboards are pure electric propulsion, focused on 20HP or lower power ranges which require less battery capacity and more affordable for boat owners. Our innovative electric propulsion outboards are well designed and engineered for the highest energy efficiency, maximum safety and virtually maintenance free. New electric outboard powerfull 6hp outboard motor for boat electric motor inboard catamaran Golden Motor has been a leading manufacturer of high power BLDC motors and controllers for more than 12 years. Electric motors are core components to make electric propulsion outboards. We had started conversion of used gasoline outboards to electric version by replacing combustion engines with BLDC motors about 9 years ago. We have gained in-depth experience and knowledge about gasoline outboards from this conversion business, and learnt its pros and cons. In the end, we decided to completely re-design electric propel outboards to address the issues and weakness areas we found from existing gasoline outboards, and to best make use of full advantages of our high efficiency (>90%) and durable (>20000 hours of working life) BLDC motors. The idea is to help the environment, cut down on noise and save heaps of money in maintenance. Boats with EZ Outboard can sit all winter and won't require winterization and oil changes, no maintenance or only minimum maintenance is required.
Metal tube tube CNC plasma cutting machine is mainly used for cutting all metals, including but not limited to aluminium sheet, iron sheet, galvanized (steel) sheet, mild steel, titanium sheet. stainless steel, iron etc. Applies in cars, motorcycles, pressure vessels, chemical machinery, nuclear industry, general machinery, engineering machinery,steel structure, shipbuilding and other industries. Features of Metal tube tube CNC plasma cutting machine 1. This plasma cutting machine is used for metal square & round tube tube cutting. Good man-machine control panel makes operation more convenient and simple, can cut kinds of complex shapes' metal sheet. 2. The liner rails are imported with high precision, good guide. Rack gear is manufactured by professional factory. Its surface is carbonizing and quenching. 3. LCD operate panel can prompt kinds of operating ways, so operator can operate it easily after simple training. 4. Driving system is LEADSHINE or YASKAWA servo drive (Dual Driver makes it fast), you can choose China LEADSHINE , Japan Panasonic /YASKAWA servo motor or stepper motor to make sure whole machine can run with smoothly in a wider speed range, short acceleration time 5. Torch height controller can adjust the best cutting distance automatically, to confirm working piece high precision cutting. 6. Automatic plasma machine Chuck rotary makes work efficiency Parameters of Metal tube tube CNC plasma cutting machine No. Description RB6020T (Length is 6000mm,Diameter is 100-400mm) 1 Working Size 200(Diameter)*6000mm(Length) 2 Z Axis Clearance 150mm (200 And Higher Is Optional) 3 Table Type Chuck rotary (Automatic + Dual Driver) 4 Transmission System Rack Pinion And Hiwin Linear Rails For X/Y 5 Driving System Leadshine Servo motor ( YASKAWA / PANASONIC is optional, also according to your needs and budget.) 6 Max. Cutting Speed 12000mm/Min(different configuration and different material and thickness speed is different) 7 Max. Travelling Speed 30000mm/Min(different configuration speed is different) 8 Working Voltage 380V/3ph(220V/3ph is optional) 9 Plasma Generator Huayuan China and USA power as your requirements 10 Arc Mode FANGLING 11 Output Current 63/100/120A/160A/200A� China (45/65/85/105/125/200A USA) 12 Max. Cutting � Thickness 6/15/18/20/30mm (This is approximate, It also according to power and kinds metal) 13 Operating System JiaoDa fangling FX430A controller (Professional for tube cutting) 14 Working Material Steel, Aluminum, Galvanized Sheet, Titanium Plate,  Platinum Plate  and almost all of the metal� square tube/Circle tube
CCD VISUAL POSITIONING LASER MARKING MACHINE Our visual positioning laser marking is based on traditional laser marking machines. This CCD laser marking machine China uses a high-precision CCD camera to capture the current position of the product. It can quickly identify product position, mark multiple products at one time, and can also perform automatic loading on the assembly line and rough positioning. Then perform visual positioning and marking to save labor, improve production efficiency, and save a lot of costs. CCD VISUAL POSITIONING LASER MARKING MACHINE TECHNICAL PARAMETERS Laser power 30W/50W Laser source Fiber laser source Laser wavelength 1064nm Work size 100*100mm-300*300mm(Option) Working voltage 0.5KW/AC220V/50Hz(option) Lifting pillar 500mm(customize) Cooling system Air Cooling Power Range 1%-100% Working environment 0~35°C humidity 90% Minimum character 0.2mm Minimum line width 0.01mm Repeatability accuracy 0.003mm Resolution 0.001mm Marking speed 0-7000mm/s Marking Depth Depends on materials Laser modulation frequency 20kHz~80kHz CCD camera Yes, Industray camera Features of CCD Visual Positioning Laser Marking Machine 01 CCD vision positioning system: Use high-resolution industrial cameras to capture dynamic images in real time, accurately calculate real-time coordinates, and place the pattern in the correct position to avoid deviation. 02 Conveyor belt: The conveyor belt can be loaded and can be easily connected to the assembly line to achieve pipelining marking, ensure stable and efficient operation. 03 Z axis Ruler: Each millimeter scale number is clearly visible, making marking more accurate. 04 Lifting handwheel: The lifting handwheel makes focus adjusting focus more simple and convenient, can meet better the marking needs of different materials.
PDU PRODUCT FEATURES ·Output AC 220V 16 channels 16A ·Provide RS485 bus ·Environmental monitoring: temperature and humidity, and threshold alarm ·The main circuit and branch circuits can be set for upper limit measurement and over-limit alarm ·Industrial-grade OLED display, current, voltage, power, energy, and switching status of the main circuit and branches ·Internal real-time clock, power-off time retention ·The whole machine has high reliability and strong anti-interference ability. ·Use high pressure resistant and flame retardant materials ·180-265V wide voltage input, providing lightning and surge protection ·Support local viewing of voltage, total current, and alarm status; ·Support monitoring and viewing the voltage, current, and alarm status of each jack; ·Supports controlling the on/off of each output jack; ·Support customization of socket standards in most countries in the world; ·Output status indication ·Operating temperature -20-55c ·Operating humidity 10% 90% (non-condensing state) ·Working power supply: 85V ~ 264AC/DC; ·Accuracy level: Level 1; ·Measuring range: 0.5A~63A, 100~300V AC/DC; ·Current resolution: 0.01A ·Alarm function: current overcurrent alarm, the overcurrent alarm value can be set through the menu or communication ·The communication adopts MODBUS RTU protocol. The data format of one frame is: 1 start bit + 8 data bits + 1 stop bit. The baud rate is 9600 bit/S. ·OLED indicates the current status of each socket and equipment operation indication ·Digital tube displays time and power parameter values ·PDU total current 32A, maximum 16A per channel
Caltta PH700 DMR Portable Radio Caltta PH7, a professional digital radio system series working with the DMR Tier III system, helps to keep professional users connected. It comes with an ergonomic design, rich digital functions, and remarkable quality to increase management efficiency and enable customers to be responsive to emergencies. Features of PH700 DMR Portable Radio Digital and Analog Compatible Compatible with both digital and analog trunking and conventional systems, supports smooth analog-to-digital network migration. Excellent Audio Performance 2W high-power loudspeaker with noise reduction design ensures a clear and loud voice even in noisy environments. High-capacity Battery for Long-time Work The standard 2000mAh battery with the power-saving design of digital technology supports 16-hour working in the 5:5:90 working mode. Reliable Quality IP68 and MIL-STD 810G rated, resistant to water, extreme weather, and drop and shock at various levels. Higher Safety The digital standard and deeply customized OS provide high safety. Professional users can use hardware encryption cards to encrypt voice and achieve better safety performance. Full Encryption Support 40bit basic encryption. 128/256bit AES encryption is optional. Easy software settings ensure that the call is foolproof. Dispatching Services PH700 DMR compatible radios support multiple dispatching services, such as registration, radio check, lone worker, and remote stun/revive to realize remote dispatching and meet daily work management needs. Clear Voice Prompt The voice prompt informs users of news and information immediately. Other Features In addition to basic Tier III DMR voice and data services, PH700 also supports many optional features such as GPS, Bluetooth, voice recording, advanced encryption, and ECS (Enhanced Conventional System).
About Us We are proud suppliers of premium quality plums from Moldova, available exclusively in season. Our commitment to excellence ensures that only the finest plums reach your table. Our Plums: Stanley Plums Origin: Europe (primarily developed in the USA) Weight: 40-50 grams Diameter: 40-50 mm Harvest Time: Late summer to early fall (August to September) Storage: Up to 2 weeks under proper refrigeration Stanley Plums are celebrated for their sweet, juicy flavor and versatility. These medium to large, oval-shaped plums have deep purple skin with a light blue, powdery bloom. The golden yellow, firm, freestone flesh is perfect for fresh eating, canning, drying into prunes, and making preserves. President Plums Origin: England Weight: 45-55 grams Diameter: 50-60 mm Harvest Time: Late September to early October Storage: Up to 3-4 weeks under proper refrigeration President Plums are known for their large size and excellent taste. With deep purple skin and yellow, firm, freestone flesh, these plums offer a sweet and mildly tart flavor. They are ideal for fresh eating, baking, canning, and making jams. Angeleno Plums Origin: California, USA Weight: 90-120 grams Diameter: 55-65 mm Harvest Time: Late August to September Storage: Up to 4-6 weeks under proper refrigeration Angeleno Plums are highly regarded for their large size, firm texture, and long shelf life. These round plums have smooth, dark purple to almost black skin and vibrant yellow, firm, clingstone flesh. They offer a sweet and mildly tart flavor, perfect for fresh consumption, baking, and preserving. Why Choose Us? Premium Quality: We supply only the highest quality plums. Seasonal Freshness: Available exclusively in season to ensure optimal taste and freshness. Contact us today to enjoy the best plums Moldova has to offer.
* Acetic Acid * Acrylamide * Acrylic Acid * Alkalized Cocoa Powder * Aluminium Sulphate * Ammonium Bicarbonate * Ascorbic Acid * Barium Carbonate * Borax Decahydrate * Borax Pentahydrate * Boric Acid * Calcined Alumina * Caustic Soda Flakes * China Clay * Chromic Acid * Citric Acid Anhydrous * Citric Acid Monohydrate * Calcined Kaolin Clay * Desiccated Coconut Low Fat * Di Acetone Alcohol * Dextrose Anhydrous * Dextrose Monohydrate * Diammonium Phosphate * Farmer Choice Whey Powder * Formic Acid * Glucose * Glycerin * Guar Gum * Gum Rosin * Hydroxyethyl Cellulose * Hydrogen Peroxide * Iso Propyl Alcohol (I P A) * Mono Ethylene Glycol (MEG) * MaltoDextrine * Methanol * Methlylene Chloride * Nonylphenol Polyethylene Glyco ether (NP 9) * Natrosol * PVA BP17 * PVA BP26 * PVA 217 * Phenol * Phosphoric Acid * Potassium Carbonate * Potassium Hydrate * Potassium Sorbate * Propylene Glycol (PG) * Sodium Acid Pyrophosphate (SAPP) * Soda Ash * Sodium Benzoate * Sodium Bicarbonate * Sodium Carboxmethyl Cellulose (CMC) * Sodium Gluconate * Sodium Lauryl Sulfate (SLS) * Sodium Lauryl Ether Sulfate (SLES) * Sodium MetaBisulphate * Sodium Sulphate Anhydrous (SSA) * Sodium Sulphide Flakes (SSF) * Sodium Tripoly Phosphate STPP * Sorbitol * Sulphate of Potash (SoP) * Skimmed Milk Powder * Soya Lecithin * Speckles * Starch * Stearic Acid * Sulphonic Acid * LABSA 90% & 96% * Titanium Dioxide Anatase (HA-100, AF-5C)0, AF-100) * Titanium Dioxide Rutile (2190, R996, R6618) * Tri Sodium Citrate * Tri Sodium Phosphate (TSP) * Urea * White Oil * Xanthan Gum * Yeast * Zirconium Silicate * Zinc Oxide
NEMA 5-15P to 14-50R for Level 1 EVs,50 Amp to 15 Amp 110 Volt RV Adapter Cord Electrical Power Plug,Heavy Duty STW 10 Gauge 20 Inch. EV Charger Optimization:Tailored exclusively for Shell EV chargers, our adapter ensures seamless compatibility with all level 1 electric vehicles. It effortlessly converts a standard 15-amp household outlet to a robust 50-amp outlet (NEMA 14-50R), catering to the unique charging needs of electric vehicles. Certifications and Safety:Prioritizing safety, our Shell NEMA 5-15P to 14-50R adapters are manufactured in accordance with UL62 CSA-C22.2. Rated for AC 90-125V,1-15A, the (UL)STW 12AWG(3.3mm²)x3C gauge wires enhance durability and reliability, providing peace of mind during every charging session.(Note When installing, use a 15-amp or lower charger setting to avoid plug damage or tripping the circuit breaker.) High-Quality Materials:Crafted with precision, the adapter features TPE fireproof insulation material and 99.99% pure 12AWG electrolytic copper wire. This high-quality construction ensures a stable current transmission and exceptional electrical conductivity, meeting the stringent demands of EV charging. Durable Build for All Conditions:Engineered for longevity, the adapter is coated with STW insulation and incorporates premium electrolytic copper. This design offers superior resistance to oxidation, wear, and heat, making it suitable for diverse environments, from indoor charging stations to withstanding the rigors of outdoor use in inclement weather conditions. Convenience and Portability:The nema 5-15p to 14-50r adapter is designed with a cord measuring 20 inches (50 cm) in length.. Beyond convenience, it allows for the hassle-free conversion of household 15-amp current to directly power 50-amp RVs, offering a practical solution for both residential and on-the-go charging needs.
LED Indoor or Outdoor lights give us new ideas in home and industry lighting decoration. LED emitting diode is individual units that make up one whole light product with many color temperature. Giving you different color options including white, red, yellow, blue, and RGB too, LED light products can reach any of your inquiries and demands. Guangzhou Yu Hong Optoelectronics Co., Ltd. devotes to providing modern led light designs, so as to better suit the inside and outside decorative needs. That is why our led light odm for sale can be used in all the typical places. For example, we can use indoor LED tape lights in homes and offices. We also can use them in light workspaces and many other areas. Outdoor we can use the neon light wholesale for garden or commercial building signs. Many people use LED lights because they can save costs, meanwhile, very good light effection. LED Light Types for Sale LED lights, components, and LED products include car bulbs, household bulbs, light strips, accent lighting, and more. Scrow down to find out more! What Are LEDs And How Do They Work? Light Emitting Diode More Efficiently Microchip Advantages of LED Light Functions Given the fact that LED light products hold many advantages, more and more people start to choose led lighting. For example, LED light for sale can save 90 percent more electrical power than incandescent light. Moreover, the lifespan of LED light products is also 50 times longer than that of incandescent light. Quality LED light for sale can be used up to 50000 hours, which can save money in the long run. LED lights are also great to protect the environment. That is why many people choose to turn their business into a LEDs line. Longer life means reducing waste, which saves the environment and keeps your properties.
PRODUCT DESCRIPTION High Durable Excavator Thumb Bucket Hydraulic Grab Bucket Hydraulic Thumb Bucket Description Also Known as Thumb Bucket, Clamp Bucket, It Mainly Applies for Recycling / Civil Applications. Clamp Bucket Specification Weight kg 180 360 520 840 1430 1860 Max Opening mm 818 1150 1380 1550 2220 2235 Oil Pressure kg/m^2 100-130 110-140 120-160 150-170 160-180 160-180 Operating Oil L/min 25-40 30-55 50-100 90-110 100-140 130-170 Cylinder Volume ton 4 5.4 5.4 8.2 10 12 Suitable Excavator ton 2~3 4~6 7~11 12~16 17~23 24~30 * The Parameter above may change with the technology improvement, will not notice additionally, please understand. * For other diameters and lengths, we can customize service, OEM/ODM Thumb Bucket Features 1. Rotary Type High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 0 2. Fixed Type: High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 1 Clamp Bucket Real Work shot High Durable Q345B Steel Excavator Buckets Toosan Digger Hydraulic Thumb 2 Excavator Integrated Thumb Bucket Can be used for disposable waste, shrubs, logs, construction waste, stones, pipes, landscaping materials, and demolition sites.Hydraulic excavator grab disassembly and recovery/civil applications. The thumb bucket has advantages in grasping small pieces of wood, sticks, and strips. Suitable for municipal construction, secondary demolition, mining, and most of the operating environment. Easily handle all types of loose, irregularly shaped objects encountered in demolition, industrial, construction, recycling, storm debris removal, landscaping, and other tough job applications.
Product Details Colour: super white colour, nature white colour, cream colour and yellow colour Whiteness:ClE 145,CIE141,CIE126.98%-103% Regular Grammage: 55gsm-300gsm Normally:55gsm,60gsm,70gsm,80gsm,90gsm,100gsm,120gsm,140gsm,160gsm,180gsm,200gsm230gsm,250gsm,280gsm, 300gsm Size: 889*1194,787*1092,880*730,700*1000,or width over 600 mm, in roll, sheets or Customized Size Paper name:Offset Paper Color: Super white color: 55gsm,60gsm,70gsm,75gsm,80gsm, 90gsm, 100gsm, 120gsm,140gsm,160gsm,180gsm,200gsm230gsm,250gsm,280gsm300gsm Cream color: 68gsm,70gsm,78gsm, 80gsm, 98gsm Yellow color: 68gsm, 78gsm, 98gsm Nature white color: 68gsm, 78gsm, 98gsm Basic weight: 68gsm,78gsm,98gsm Material 100% virgin wood pulp, high grade, non-fluorescence Base paper gsm 150gsm~350gsm Roll width 50~1000mm Core 3 inch or 6 inch Our diameter 1.1~1.2m or 90-95cm Quality high quality, good brightness, smoothness, stiffness MOQ 1tons PE lamination machine 4 sets Capacity 6000 ton per month Printing offset printing Feature 1.Excellent printing adaptability. 2.Adaptable to special requirements of various products package 3. Stable ink absorb ability, low surface roughness and rich printing dots, makes excellent printing result4.Competitive price with excellent stable quality products Packaging Details: 1.) Packing for roll: inside PE film and outside for Kraft paper, with two rubber stopper in both ends 2.) Packing for sheet use high quality Kraft paper packing,500 sheets or 250 sheets in one ream, Outside use thick and high quality thermal plastic film packing. 3.) Ream packing or pallet packing Usage Printing books, Computer stock form, Notebook, Cash register roll Direct mail, Newsletter, Letterhead, Instruction manual etc Samples: Free for you, A4 or A3 size , but you should pay the shipping cost by yourselves (Fedex,DHL ..)
*The depth of the feed, the real-time battery power digital display, the operator is clear at a glance *Dual control system, both electronic feed and mechanical operation feed *Electronic feed, the feed precision is adjustable, realize the dual purpose of primary grinding and precise grinding *Preset the warning feed depth for grinding to prevent excessive grinding and cause grinding accidents *Super endurance capability, can work continuously for 1 hour *The whole machine is waterproof and can be used below minus 30 Specification Model LJ-LGF2001 Type Electric Rail Grinding Machine Material Aluminium Operating speed 4500r/min Rated power 5Kw (brushless DC motor) Grinding wheel feed accuracy 0.1 mm Grinding wheel size 150*55*75x4-M8 mm (outer diameter inner diameter thickness) Maximum tilt range of the grinding wheel 90 ° in one direction Operating temperature requirements -30 to 45 Grinding wheel type resin thick-walled cup-shaped grinding wheel Battery pack capacity 21Ah Rated voltage of battery pack 72V Weight 70Kg Profiling function realize profiling grinding of the outer edge contour of different types of rails Endurance capability(one charge) thermit welding grind around 8 welds; laser welding grind around 10 welds Grinding wheel feeding mode Dual control system, which can feed both mechanically and electronically Electronic feed It is divided into three gears for key switching and operation. First gear: fine grinding, unit feed 0.1mm Second gear: initial grinding, unit feed 0.3m Third gear: initial grinding, unit feed 0.5mm
Features: 1)Unique irregular wavy patterns texture 2)Light wight yet good stiffness 3)Comfortable to the touch 4)Elegant and high class style 5)Customized size and design Products Description: Product name: Conqueror paper laid textured Material: Virgin wood pulp Size: 90/100/120/160/220/250/300 Feature: Unique wavy patterns texture, light weight, stiff, comfortable touch, classic, elegant and classic style Certificate: IS014001,9001, FSC Quality control: Paper Gram:士5%, Thickness:+5%, Moisture:6%-8% MOQ: 25 tons (1*40 HQ ) Payment: 30%deposit in advance and 70% should be paid before delivery, LC at sight, Negotiable payment terms Trade terms: FOB Ningbo or any Chinese seaport, EXW can be negotiable Shipping way:By sea, by air, by courier(DHL, FEDEX, TNT, UPs, etc), as your requirement Conqueror paper, also known as Ganggu paper, water stripe paper, is a type of a specialty paper created in 1888. It is made of original wood pulp and has an unique texture. The paper is crisp, comfortable to the touch, elegant and classic texture and has a strong three-dimensional effect. Suitable for high-end picture albums, title pages of books and periodicals,covers, text, greeting cards, tags, desk calendars, letterheads, envelopes, books and periodicals,company reports, menus,catalogs, product manuals, advertisements, posters, business cards, company reports, envelopes, invitations,High-end printed matter such as greeting cards, recipes, cards, wine labels, product introductions,etc.
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 2000 mm; Maximum length of two centers: 2000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2570 kg; Machine overall size: 3668x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1500 mm; Maximum length of two centers: 1500 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96(37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2220 kg; Machine overall size: 3168x1000x1267 mm;
Parameter: Maximum swing diameter over bed: 400 mm; Maximum swing diameter over carriage: 210 mm; Maximum turning length: 1000 mm; Maximum length of two centers: 1000 mm; Spindle bore diameter: 52 mm; Spindle nose type: ISO-C6 (C8) type; Spindle inner hole taper: MT6 ; Spindle speed range(clockwise): 10-1400(24 steps) rpm; Spindle speed range(anti-clockwise) 12.5-1400(12 steps) rpm; Spindle longitudinal feed per revolution: 0.08-1.59 mm/r; Spindle transverse l feed per revolution: 0.04-0.79 mm/r; Spindle motor power: 11 kw; Metric threads range(number): 1-192(44 kinds) pcs; Inch threads range(number): 2-24(24 kinds) pcs; Modular threads range(number): 0.25-48(39 kinds) pcs; Diametral pitch threads range(number): 1-96 (37 kinds) Dp; Transverse travel of the tool rest: 320 mm; Travel of small tool rest: 140 mm; Swing angle of tool rest rotary table : Pos&Neg 90 Deg.; Rapid feed speed (transverse/longitudinal ): 4/2 mm; X-axis travel: 180 mm; Z-axis travel: 320 mm; Section size of tool shank: 25*25 square mm; Tailstock sleeve diameter: 75 mm; Tailstock center taper hole: MT5 ; Tailstock sleeve traverse: 150 mm; Machine weight: 2070 kg; Machine overall size: 2668x1000x1267 mm;
Loc Nam Import Export Company Limited (Loc Nam Imex Co., LTD) is an exporter specialized in providing bulk quantities of high quality agricultural products in Vietnam. Established since 2012, with more than 10 years building and developing, we now have more than 20 items in our catalogue including Black and white pepper, cashew nuts, coffee and spices. Our main export markets are Asia and Europe. We pride ourselves on our market and product knowledge, high quality management and customer services including processing facilities which meet the international standards of ISO 22000, ISO 9001, HACCP. About coffee beans, we product 3 types: Arabica coffee beans Robusta coffee beans Roasted coffee beans Specifications of Robusta green coffee beans S16 clean: - On sieve: Screen 16 � 90% min - Moisture: 12.5% max - Foreign matter: 0.2% max - Black � & Broken : � 0.5% max � Sticks & stone per bags: 0.5% � max - Origin: Vietnam - Payment: T/T  or  L/C at sight 100% - Port: Ho Chi Minh Port - Supply ability: 3000 - 5000 MT/Month - Packing: New jute bag ( net 60 kg) , in Bulk/ big bags - Container capacity: 19.20-21.60 MT / 20FT Container
Loc Nam Import Export Company Limited (Loc Nam Imex Co., LTD) is an exporter specialized in providing bulk quantities of high quality agricultural products in Vietnam. Established since 2012, with more than 10 years building and developing, we now have more than 20 items in our catalogue including Black and white pepper, cashew nuts, coffee and spices. Our main export markets are Asia and Europe. We pride ourselves on our market and product knowledge, high quality management and customer services including processing facilities which meet the international standards of ISO 22000, ISO 9001, HACCP. About coffee beans, we product 3 types: Arabica coffee beans Robusta coffee beans Roasted coffee beans Specifications of Robusta green coffee beans S16 wet polished: - On sieve: Screen 16  90% min - Moisture: 12.5% max - Foreign matter: 0.2% max - Black  & Broken : � 0.5% max Sticks & stone per bags: 0.5%  max - Origin: Vietnam - Payment: T/T  or L/C at sight 100% - Port: Ho Chi Minh Port - Supply ability: 3000 - 5000 MT/Month - Packing: New jute bag ( net 60 kg) , in Bulk/ big bags - Container capacity: 19.20-21.60 MT / 20FT Container
