Place of origin: guangdong, china (mainland) Brand name: egood Model number: type 65, 80, 100 Open style: folding Position: interior Surface finishing: finished Type: movable partition Door material: aluminum alloy Track: anodized aluminum 6063-t6 Carrier materials: imported pom Main frame: anodized aluminum 6063-t6 Carrier over load: 225kg Panel thickness: 65, 80, 100mm Sound insulation: max 45db Height: max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: melamine, fabric, leather, hpl, wall paper ect. 1)thickness panel:65mm, 80mm, 100mm, height from 2meter to 17meter 2)top supported without floor track or guide 3) clear anodized extruded aluminum tracks and frames, customized powder coated color are available 4) rock wool infill, with top and bottom retractable mechanism in the middle and mdf, plywood or plaster base board on both side 5) sound insulation coefficien :stc 32db to 53 db, astm standard of acoustic tested in hongkong. 6) available in wide range of finishes. 7) fast delivery and rich experiences in oversea project installation guide & supervision. -
Place of origin: guangdong, china (mainland) Brand name: egood Model number: type 65, 80, 100 Open style: folding Position: interior Surface finishing: finished Type: movable partition Door material: aluminum alloy Track: anodized aluminum 6063-t6 Carrier materials: imported pom Main frame: anodized aluminum 6063-t6 Carrier over load: 225kg Panel thickness: 65, 80, 100mm Sound insulation: max 45db Height: max 4.5meter Rock wool infill: 55kg/m3 Base board: 12mm thickness plywood Finishing option: melamine, fabric, leather, hpl, wall paper ect. 1)thickness panel:65mm, 80mm, 100mm, height from 2meter to 17meter 2)top supported without floor track or guide 3) clear anodized extruded aluminum tracks and frames, customized powder coated color are available 4) rock wool infill, with top and bottom retractable mechanism in the middle and mdf, plywood or plaster base board on both side 5) sound insulation coefficien :stc 32db to 53 db, astm standard of acoustic tested in hongkong. 6) available in wide range of finishes. 7) fast delivery and rich experiences in oversea project installation guide & supervision. -
General Mold Specifications: Name:Plastic injection moulds Plastic material:PVC/PPR/PP/PE/ABS/POM/PPH/PERT/PVDF/PPSU/...etc Steel of Cavity & Core:DIN 1.2316/ DIN 1.2738/DIN 1.2344 /M300/ 718/ P20..etc Steel of Mouldbase:S50C.LkM standardetc Nos of Cavity:Customized Fitting standard:EN/DIN/GB/BS Core pulling system:Hydraulic cylinders Injection molding machine:Engel ES3550/550K Gate system:Tunnel gate/Point gate/Direct gate/Sub-gate/Rectangular gate...etc. Design software:AutoCAD/UG/Solidworks Mould heat treatment: Tempering/Quenching/Nitriding Surface treatment: Polish/Etched...ect. Mould ejector way: Ejector pin/Ejector plate/ Air valves/Slide. Hardness of Cavity & Core:35-52HRC Hardness of Wear Parts:45-52HRC Core pulling system:Motor /oil cylinder/ stripping plate/angel pin/machinery. Mould Accessories:DME/HASCO Standard. Cooling system:In core baffle cooling and in cavity plate chain drilling type cooling Surface finish:Diamond polish Molding life:500,000-3,000,000shots Runner:Cold or Hot Delivery time:25-40work days Packing:wooden case woods
Switch Probe Pogo Pin SWP164 for Electronic Test Switching Probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switching probe we will introduce is SWP164. Its diameter is 1.64 mm and total length is 44.65 mm. As usual, switching probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP164 is 160 m. The materials used for the construction of switching probes are different for each component: The barrel is made of brass. Subsequently gold plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of Beryllium Copper, then gold and nickel plated. The insulating sleeve is made of POM For details of SWP164 switching probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 160 milliohms, maximum Full Stroke: 5 mm Rated Stroke: 3.3 mm Spring Force: 130 gf (4.5 oz) Normal Condition: Disconnecting between Plunge 1 and Plunger 2 Press down 1 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Au on Ni Plated Spring: SWP, Au on Ni Plated Plunger 1: Beryllium Copper, Au on Ni Plated Plunger 2: Beryllium Copper, Au on Ni Plated Insulating Sleeve: POM Advantages of this switching probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switching probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on.
Alternative fuel, tdf, srf, rdf, tire derived product, rubber powder, rubber granule, steel tire wire, rubber buffing, 20 mm, tire shred, tire bales, otr cut 3/4/5 pieces, truck tire cut 3 pieces, agriculture tire shred, agriculture tire cut 3 pieces, rubber compound, rubber compound a grade, rubber compound b grade, rubber compound c grade, steel friction, rubberized steel friction, nylon friction, rubberized cord, green tire, bagomatic bldder, butyl bladder, scrap paper, occ paper, soft mix paper, hard mix paper, magazine and old news paper, scrap metal, electric motors scrap, steel tire wire, compressor scarp, aluminum scrap, hms, alternators scrap, transformers scrap, alucobond, plastic scrap, abs, pc abs, ps, pvc, pp, pom, pe hd, nylon pa6 & pa66, bopp, pet, weee, mrp.
Valve Housing is a key auto valve fitting to assist valve to control the flow of air or liquid through the tube. If your valve in a corrosive environment and the valve housing can't resist corrosion, it will reduce the durability.The inappropriate valve housing and valve fittings will influence valve performance as well. So, choosing the right valve housing and valve seal material is critical to the running of an automobile valve and the whole system. The core characteristics, materials, properties of the automotive valve housing and application environment should be taken into consideration, including temperature, corrosion possibility, wear characteristics and pressure. The valve body is an important part of the vehicle's automatic transmission frame. It works in the system framework. The valve body directs the pressurized transmission fluid to the valve system, which is equipped with a suitable handle assembly to smoothly shift the gears. Also, the valve uses the weight of the pressure drive flag to determine the gear set, otherwise it is called servo. This process will be performed when the speed changes from low to high or vice versa. Material Available Stainless Steel:SS201,SS301, SS303, SS304, SS316, SS416 17-4PH etc. Steel:mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45# etc. Brass:HPb63, HPb62, HPb61, HPb59, H59, H68, H80, H90 etc. Copper:C11000,C12000,C12000 C36000 etc. Aluminum:AL6061, Al6063, AL6082, AL7075, AL5052, A380 etc. Iron :A36, 45#, 1213, 12L14, 1215 etc. Plastic:ABS, PC, PE, POM, Delrin, Nylon, Teflon, PP,PEI, Peek etc.
ISO25 Tool Cradle Clip ISO 25 Tool Holder Clamp for Auto Tool Changer CNC Machines This plastic toolholder clamp is ISO25 tool holder clip, it is used for ISO 25 tool holder clamping. The ISO25 tool fork is widely used with auto tool changer cnc machines, such as cnc routers, cnc milling machine, VMC (Vertical Machining Center), etc. ISO25 Plastic Holder Finger Specifications: 1. Made in China, famous brand. 2. Imported POM plastic material, high quality, reinforced and anti-explosion. 3. Dynamic balance grade: G2.5, 30000rpm 4. Yaw precision: 0.005mm ISO25 Tool Holder Clamp Appliction: 1. Apply for auto tool changer cnc machine tool magazine, drum-type, carousel-type, etc. 2. Application industry: CNC hole drilling, CNC milling, CNC engraving, high precision and widely used for high precision processing. ISO25 ATC forks are available in stock for quick delivery. Rico CNC supplies high-quality CNC toolings, replacement and accessories. ISO30 tool clips, HSK63 tool finger, BT30 BT40 tool cradles, HSK40E tool changer grippers, ISO10 forks, ISO15 clips, ISO20 grippers, CNC replacing tool finger for many automatic tool changers such as Biesse, CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, Homag, SCM, Unique and more. Payment can be made by Western Union, Paypal, T/T. Welcome your inquiry!
BT 30 Finger Style Toolchanger Gripper Forks Black Plastic Toolholder Clip These BT30 Finger Style Gripper are automatic tool changer carousel tool magazine tool holder clamps, widely used in carousel tool magazine for auto tool changer cnc machine. These plastic toolchanger forks are tool fingers for BT30 tool holders, we can also supply you BT40 plastic tool fingers. BT30 Toolchanger fork Specifications: 1. Made in China, famous brand 2. Imported POM plastic material, high quality, reinforced and anti-explosion. 3. Dynamic balance grade: G2.5, 30000rpm 4. Yaw precision: 0.005mm BT30 tool fingers holders are available in stock for quick delivery. Rico CNC supplies high-quality CNC toolings and accessories; ISO30, BT, HSK tool holders; ISO30 tool finger grippers, HSK Toolholder Clips, White BT tool changer clips for many automatic tool exchangers. Rico is able to help you order the correct CNC tool fingers for your ATC tool magazines. Payment can be made by Western Union, Paypal, T/T. Welcome your inquiry! BT 30 tool finger, BT30 tool holder clamp, BT30 Plastic Tool Holder, Finger Style Gripper, BT30 Toolchanger fork, Finger Grippers, Toolchanger Grippers, Tool Holder Gripper, tool fingers holders, BT30 grippers, bt30 changer, bt30 tool holder claw
The characters of cast nylon rod and sheet : 1. High strength and stiffness 2. High impact and notch impact strength 3. High heat deflection temperature 4. Good at dampening 5. Good abrasion resistance 6. Low coefficient of friction 7. Good chemical stability against organic solvents and fuels 8. Excellent electrical properties, ease of printing and dyeing 9. Food safe, noise reduction 2. What are the advantages of our factory? (1). Competitive Prices • Ours key strength is its ability to manufacture products based on optimal economies of scale, offering you the most competitive prices in the market. • With our own in-house engineering design, tooling and fabrication abilities we manufacture a wide range of high quality products including tooling and pre -production prototyping. Our in-house services allow us to keep costs to a minimum and give us the freedom to customize our products to your needs. (2). In Stock With a wide range of stock at our warehouse as well as easily accessible stock at our own international production facilities, we are able to meet your requirements whenever you need it. (3). Customized Products Nylon/PA sheet. We stock a wide range of engineering plastics for general engineering applications and offer manufacturing and machining services. Some of our engineering plastic products that we stock are PTFE, UHMWPE, POM, and Nylon in forms of rod, sheet and tube. Customized engineering products, machining and cut to size services are also available.
Radio Frequency Probe Pogo Pin RPM700 Series for Electronic Test Radio frequency coaxial probes are a type of measurement device used for electronic test equipment to measure radio frequency signals of electronic circuits in silicon wafers, die and open microchips. In addition, RF coaxial probes are used in narrow pitch or high density RF interconnect applications in connector assemblies. Transmission lines used in RF applications are usually coaxial cables connected to circuit boards and microstrip lines inside circuit boards. Features: Low impedance High bandwidth Repeatable measurements Coaxial design Interchangeable inner pin Advantages Low cost Best yield Repeatable accurate test Long lifespan Application Broadband RF measurements PCBA test SMA connectors RF switches etc. There is a fixed schedule for mass production of radio frequency test probe RPM700 we will introduce here. This probe is 33.55 mm in total length  This probe can withstand the current up to 1 Amp. The materials used for the construction of this radio frequency test probe are different for each componen  are plated during the galvanic plating phase. The spring  is  made of gold-plated music wire. For details, please check parameters in below table. Materials (plated) Barrel (1): Brass, Au on Ni Plated Plunger (1): Brass, Au on Ni Plated Barrel (2): Phosphor Bronze, Au on Ni Plated Plunger (2): Beryllium Copper, Au on Ni Plated POM Spring: SWP-A/B, Au on Ni Plated Specifications Full Stroke: 3.5 mm Rated Stroke: 2.3 mm Spring Force: 388 gf at load 2.3 mm Company Information: Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
Cooling Tower Nozzle,Carbide Nozzle,Spiral Nozzle SPJT series spiral nozzle is a kind or hollow/full cone nozzle that with spraying angle from 60 to 170 degree, the liquid flow rate is about 5.5-4140L/M under pressure of 3 bar. The spiral nozzle has a compact structure and smooth flow channel design , it can minimize the liquid barrier and makes the maximum flow rate in certain pipe size. This spiral nozzle can be installed in most of the pipe systems, NPT or BSPT (MALE) can be provided as thread types. Commonly the spiral nozzles with 1/4 inch-2 inch are usually made of SS316, PTFE,PP or POM, other materials can be also selected for special application. FAQ Q1. How fast can i get the quotation? A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority. Q2. How can I get a sample to check your quality? A: After price confirmation, you can require for samples to check our quality. If you need the samples, we will charge for the sample cost .But the sample cost can be refundable after order confirmation when your quantity of the order is more about the MOQ. Q3. How long is the Delivery Time for Spray Nozzles? A: 7 days if only an extension of existing families. Within 2 days can be shipped out if the nozzle we have in stock. B: 10 to 12 Days for nozzles that can be machined off bar stock (7 extra days if no inventory bar stocks). C: 25 to 35 Days for nozzles that require tooling (casting). 5 to 8 new nozzles can be developed simultaneously within 20 days. Q4. What is your terms of delivery? A: We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you. Contact Us Website http://www.spray-nozzle.net Contact Person Amanda Luo Mob 0086 182 7361 4813 Email cyco523(at)ecyco.cn Telephone 86-769-8155 8103 Fax 86-769-8155 8002 Address Xiabian Industrial Park, Chang'an Town, Dongguan City, Guangdong Province. China
INNIS01 Network Interface Slave Module The INNIS01 Network Interface Slave Module (NIS) and the INNPM11 Network Processing Module (NPM) make up a process control unit interface. This process control unit interface provides control modules in a process control unit with access to an INFI-NET® communication system. This instruction explains process control unit interface features, specifications and operation. It also includes installation and troubleshooting procedures for each module. The system engineer or technician using this interface should read and understand this instruction before installing any modules. In addition, a complete u IC74F6-PB31A400 MM-PM21-400C JANCD-JCP02B SGMG-09V2AAS Modicon 110-232 CUB7P010 UAJPEE-04DK2K KJ3231X1-BA1 SD3000 SD3K-2004 PWM325 DCR-7-300BDC HMCP250L5W MCV41A0150-203-4-00 CRK4-50-AMA-AUUV KEA-1127 MDMU0110 PCI-5B30-01 CIMR-G5A42P2 562-571-K FBS-20MC FTXCN12F5 FVCB011-55K0-3P4 LU2MB0B MCH41A0022-5A3-4-0T08276730 MDMV0010 JANCDCP06-02 CACR-IR010101FB PCI20U-TB5PC BSH0701M21F1A PZE9P/777148 MTE-4090-BCBCE PFTL 201CE-1 ZHH503E VEBNM3538 KSX-240 MCV40A0055-5A3-4-0T 08274762 JAMSC-120DAO84300 MKS51A075-503-00 HEWLETT PACKARD 5508A HEWLETT PACKARD 8662A WGA-710B-0 BS08B-1-OL SC745 KRT-01041-T CIMRP7U27P51 RMF302EAU1173 MVME162P-244LE KRT-01041-T CIMRP7U27P51 RMF302EAU1173 SM30058-0834 C48CB10 HEWLETT PACKARD 85053A TSXDSY08T31 TM2ALM3L FRN0.75E1E-4A TS3212N30 SMCINR-498-003B-X004 HF44BS-A47 SS6-360-6-N12-FD GF3-2819-1 TOSHIBA+ FDL18EX-N VJDSTKSTO511 LS403D-83301 ICP-CM-1003-CD-8P-USON PC872600-00E CPCR-MR55CV22 PX245-02 TM2DDO32UK P50E-5 MVME167-0468040 MIOP-61173 TC-PRS02 PX410-500SI SA2000E CTL0501FCTL05 MPCKN02NAX00H CMR-H37G2-10 DPR900X1-A7 XPSAC3721 CPV14-GE-MP-8 ZUS252405 P36G5229D02 JUSP-NS115 PXI 6070E CIMRE7U22P2 POM-TWX HP5705-18 NBRA-656 XSZBC90 TAU DELTA HOUSE-19 GT1575-VNBA SV015IG5-4 EJA430AEAS5B92EA 2015-01-5 CUB5TCB0 QMM34015 MC07A110-203-4-1008272883 6ES5951-7LD11 MM-PMC2-110 LEA75F-24 MCLTPB0110-5A3 6DD1670-0AG0
Packaging & Delivery Packaging Details: PE BAG+CARTON Delivery Detail: Shipped in 15 days after payment HDPE PP COMPRESSION FITTINGS KEXING PP compression fittings and clamp saddles are designed specifically for connecting PE pipes with an outside diameter of 20-110mm. They are fully compatible with all LDPE, HDPE, PE40, PE80 and PE100 pipes complying with EN12201, ISO4427, ISO14236, ISO13460, DIN 8074. They are normally used to convey drinking water and fluids at pressure up to 16 bar for generic applications. The quality of the material used makes these fittings resistant to etching by numerous chemical substance and to UV rays. Kexing universal fittings can be used to connect systems using PE metric piping with existing pipes made of any material. Technical data Materials Part Material Body(A) Heterophasic block polypropylene co-polymer(PP-B) of exceptional mechanical properties even at high temperature. Blocking bush(D) Polypropylene Nut(B) Polypropylene with dye master of high stability to UV rays andsolidity to heat( S grade according to standard DIN54004) Clinching ring(C) Polyacetal resin(POM)with high mechanical resistance And hardness O Ring gasket(E) Special elastomeric acrylonitrile rubber(EPDM) for alimentary use Reinforcing ring AISI 430 (UNI X8Cr17,W,nr 14828)Stainless steel for female threads from 1''to 4'' Working Pressures KEXING PP compression fittings allows the maximum working pressure(PN~PFA*) of 16 bar(UNI 9562) for diameters from 16mm to 63mm and PN10 bar for diameters from 75mm to 110mm, at the temperature of 20°C.Maximum allowable working pressures related to the duration of pressure and temperature: Dn PFA* PMA* PEA* 16-63 16 20 24 75-110 10 12.5 15 Temperature(°C ) Da-10a25 Da+26a+35 Da+36a+45 16-63 16 20 24 75-110 10 12.5 15 Reference Standards Dimensions: UNI 9561Working Pressure: UNI 9562,DIN 8076-3,ISO 14236,BRL-K03. Polyethylene(PE)pipes: UNI 7990,DIN 8074,UNI EN 12201 Threads: UNI ISO7/1,UNI EN 10026-1,ANSI ASME B1-20.1 Flanges: DIN 2501-1,UNI EN 1452-3.IS 7005-2
Lithopone B301(28%-30%) Name:Lithopone B301(28%-30%) Charlton white Apperance:white powder HS CODE:3206421000 CAS No:1345-05-7 Molecular Formula:ZnS+BaSO4 Packing Detail: in 25kg/ bag,woven bag with PE liner or paper bag(can follow customersâ?? requirements).,26mt/20'' FCL(without pallet),24mt/20â??â?? FCL(with pallet). US $750-950 / Metric Ton | 1 Metric Ton/Metric Tons (Min. Order) Supply Ability: 15000 Metric Ton/Metric Tons per Year Port: changsha/shanghai/guangzhou z Specifications: 1. lithopone manufacturer 2. Manufacturer and trade integration. 3. ISO & SGS certificate. 4. Can meet customerâ??s specialized index and packing 1. Description Lithopone B301ï¼?28%-30%ï¼? is a kind of lithopone whose hiding power is better than that of zinc oxide and worse than that of titanium dioxide.It has good heat-resisitance and is insoluble in water. White powder, is a mixture of zinc sulfide and barium sulfate. Have high whiteness and good covering power. It is called Inorganic white pigment. Widely used as white pigment of plastics such as polyolefin, vinyl resin, ABS resin, polystyrene, polycarbonate, nylon and polyoxymethylene (POM), also for paintï¼?ink ,grinding wheel and plaster. It is use to colourate for rubber products , linoleum, leather, paper, enamel. 2. Features 1) A white pigment produced by precipitation through filtering, heating and quenching works 2) Has mostly been replaced by titanium dioxide which is more durable, but it is much cheaper 3. Applications Lithopone B301 is mainly used of coatings, printing ink, rubber, plastic, powder, profiles, paint, paper, plaster and leather, etc. 1) Used as a base for lake pigment 2) Used as a inert pigment for paint, ink and cosmetics 3) A large range of applications in plastic industry 4) Used as a filler in paper, leather, and linoleum 4. Index Item B301 Ba+SO4(as Zns)% 99%min Zinc(as Zns)% 28-30%min Zinc Oxide% 0.6max 105degree Volatile% 0.3max Water Soluble% 0.4max Screen Residues(63um)% 0.1max Oil Absorption(g/100g) 14max Tinting Strength 105min Hiding Power(contrast ratio) Not less than 5% standard sample Color(compare with standard sample) excel Specific Gravity Value 4.1min 5.Advantages: 1) real manufacturer,20 years producer 2) quality is superior to GB standard,free sample for your test before shipment 3) expert sales & after-sale team,prompt shipment with professional documents 4) chemical stability,SGS/CIQ report 5) high whiteness 6) various types:B301,B311,B302,DS 6.Price,payment&shipping terms: Payment term: 30% deposit in advance, the balance to be paid against B/L faxing; L/C. Price Validity: 1 month Delivery term: 7-15 days after receiving deposit Sea freight: As freight always keeps fluctuating, we prefer to finalize this rate before shipment 7.More photos about products and our factory
Product presentation: Thrust ball bearing from the seat,shaft ring and ball cage assembly of three parts.And the axis of said shaft ring,and the shell with said seat.By the force of sub-way thrust ball bearings and two-way thrust ball bearings.Thrust ball bearings can withstand axial load,two-way thrust ball bearings can withstand axial load. Thrust ball bearings,which ring with the shaft.Mounting surface spherical bearing race,aligning performance.Can reduce installation errors.Thrust ball bearings can bear radial load,lower speed limit. About Our Company: 1.With more than 25 years experiences of producing and R&D bearings. 2. All of ours roller bearing and ball bearings with CE ISO TUV certificate 3. Our products have been exported to about thirty country/areas, and enjoyed a high reputation on the domestic and overseas market. 4. The OEM and ODM are available. 5. Professional after-sales team 6. Offering most reasonable price What Information Should You Provide When Ordering With Us? 1. Please tell us the specific bearing model number and dimensions. 2. Please tell us the exact materials of bearing and wheel accordingly:    For bearings: chrome steel,stainless steel 420, stainless steel 440, stainless steel 304 for option    For plastic coated wheels/rollers: Nylon(PA), POM(Polyoxymethylene), PU(Polyurethane),   TPU,Fiberglass, etc 3. Please tell us your application of the bearings/wheels. 4. Please send us your drawings if available. 5. Please tell us your estimated order quantity on a monthly-basis to help us offer you accurate price. Main products: 1.Deep Groove Ball Bearings 2.Spherical Roller Bearing 3.Tapered Roller Bearing 4.Thrust Ball Bearing 5.Cylindrical Roller Bearing 6.Angular Contact Ball Bearing 7.Pillow Block Bearing 8.Other types of bearings FAQ: 1. Are you a factory or a trading company? Shandong XSY bearing co., Ltd. is a professional factory of deep groove ball bearings  2. Is OEM available? Yes, OEM is available. We have professional designer to help your brand promotion. 3. Is the sample available? Yes, samples are available for you to test the quality. 4. Have the products been tested before shipping? Yes, all of our bearings have been tested before delivery. 5. What's benefit will you bring? Your clients will be satisfied of the quality. Your clients continue orders. Your can get good reputation from your market and obtain more orders. Our Package: *industrial pakage+outer carton+pallets *sigle box+outer carton+pallets *Tube package+middle box+outer carton+pallets *According to your requirments
Pom pom trims, tassel tiebacks, cotton fabrics .Manufacturer and exporter
Pp , Hd , Pom.
Pom plastic raw materials.
Eaglewood.
Pfa peek, pps+gf40, pctfe, etfe, pom sheet and rod, profiles, and machining services, special plastic solution.Fob, cfr, ddp, ddu exw