Radio Frequency Probe Pogo Pin RPM700 Series for Electronic Test
Radio frequency coaxial probes are a type of measurement device used for electronic test equipment to measure radio frequency signals of electronic circuits in silicon wafers, die and open microchips. In addition, RF coaxial probes are used in narrow pitch or high density RF interconnect applications in connector assemblies. Transmission lines used in RF applications are usually coaxial cables connected to circuit boards and microstrip lines inside circuit boards.
Features:
Low impedance
High bandwidth
Repeatable measurements
Coaxial design
Interchangeable inner pin
Advantages
Low cost
Best yield
Repeatable accurate test
Long lifespan
Application
Broadband RF measurements
PCBA test
SMA connectors
RF switches
etc.
There is a fixed schedule for mass production of radio frequency test probe RPM700 we will introduce here. This probe is 33.55 mm in total length  This probe can withstand the current up to 1 Amp.
The materials used for the construction of this radio frequency test probe are different for each componen  are plated during the galvanic plating phase.
The spring  is  made of gold-plated music wire.
For details, please check parameters in below table.
Materials (plated)
Barrel (1): Brass, Au on Ni Plated
Plunger (1): Brass, Au on Ni Plated
Barrel (2): Phosphor Bronze, Au on Ni Plated
Plunger (2): Beryllium Copper, Au on Ni Plated
POM
Spring: SWP-A/B, Au on Ni Plated
Specifications
Full Stroke: 3.5 mm
Rated Stroke: 2.3 mm
Spring Force: 388 gf at load 2.3 mm
Company Information:
Centalic Technology Development Ltd. was founded in 1980. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us.
Notice:
Stock: standard product. As usual, they are in stock.
Express: DHL, FedEx, UPS, etc.
Payment: T/T, PayPal
Warranty: 2 years After-sale Service: Online technical support Material: metal Shelf Life:2 years Instrument classification:Class II Safety standard: none Application: Cardiology
ROSSMAX GB102 MANUAL SPHYGMOMANOMETER White enamel 300 mmHg no-pin stop manometer Chrome-plate brass air release valve Latex free cuff Stethoscope 2 years warranty Please Don't Hesitate To Contact Us In Case Of Any Interested
EMSCULPT EMSCULPT is the only procedure that can help both women and men burn fat and build muscle. Dr. Busso was part of the BTL Aesthetics EMSCULPT development team and was the first physician in Thailand to offer this exciting new technology to patients. Particularly effective on the buttocks and abdomen, EMSCULPT uses High-Intensity Focused Electro-Magnetic (HIFEM) field technology to induce short bursts of powerful muscle contractions that lead to increased muscle density, decreased volume, better definition, and improved tone. Product Specifications : Max. Power : 200 Watts Output Frequency : 27.12 MHz Treatment Duration : 1 to 30 min Mode : Continuous Output Power : 0 W - 200 W Dimensions of Device : 22 in W x 39 in H x 22 in D Weight of Device : 84 lbs Graphic Color Touch Screen : 8.4", 640x480 pixels Dimensions of Applicator without Cable : 27 in W x 7.6 in H x 4.1 in Weight of Applicator : 3.9 lbs KEY FEATURES : Builds muscle Burns fat Together! Non-invasive buttock lifting procedure No surgery No anaesthesia Suitable for everyone only a 30 minute walk in walk out procedure Only 4 session needed 2-3 days apart Feels like an intensive workout No downtime Instant results but gets better after two to four weeks 16% average increase in muscle mass 19% on average fat reduction Full Package : -Machine -Applicators -Intruction For Use -Emsculpt accessories -Training Materials -Patient Video Loop
Frequency Test Probe Pogo Pin SCPC078 for Chip Inspection Semiconductor test probes are usually called double-ended pogo pins. � Common tip styles include B, J, J1, U, U1, etc. All of the probes are extremely thin and miniature, however, the requirement for their test accuracy is very strict. They are mainly applied to the fields of semiconductor tests and frequency tests of communication devices, for example, the frequency tests of mobile phones, walkie-talkies, computers, etc. SCPC078 series is a medium-sized one in all semiconductor test probes. Both plungers are movable. There is a concave ring at one end of the barrel. It can be applied to the tests of products which requires relatively high accuracy, for example frequency tests of semiconductor and communication devices. Developed and manufactured on our own, this product takes the lead in the test industry. Our complete production lines can also meet the needs for mass production. Its parameters are as below. Materials (plated) Barrel: Phosphor Bronze, Au on Ni Plated Bottom Plunger: Beryllium Copper, Au on Ni Plated Top Plunger: Beryllium Copper, Au on Ni Plated Spring: SWP-A/B, Au on NI Plated Electronic Specification: Current Rating: 4 amps Contact Resistance: 80 milliohms max Bandwidth: 9.3 GHz@-1dB Propagation Delay: 37 ps Inductance: 1MHZ@-0.01167uH Captance: 1MHZ@2.16734uF Specifications: Full Stroke: 1.8 mm Rated Stroke: 0.8 mm Spring Force: 30 �±9 gf@load 0.8 mm Mechanical Life: about 200000 cycles Company Information: Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
DESCRIPTIOn: Titanx100 RADIOGRAPHY RATING: 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT: 8KW RECTIFICATION: Full Wave Rectified TIMER: 0.06 to 5 sec DIGITAL DISPLAY : Digital Display of mAs, kV & mA X-RAY TUBE: XD-3/Imported POWER SUPPLY: 230 Voltage AC, 15 Amps LINE REGULATION: 10% 0.6max PROTECTION: Electronic overload Protection TUBE STAND counter Balance Mobile
DESCRIPTION: Titanx RADIOGRAPHY RATING: 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT : 8KW RECTIFICATION: Full Wave Rectified TIMER: 0.06 to 5 sec DIGITAL DISPLAY: Digital Display of mAs, kV & mA X-RAY TUBE: XD-3/Imported POWER SUPPLY: 230 Voltage AC, 15 Amps LINE REGULATION: 10% 0.6max PROTECTION: Electronic overload Protection TUBE STAND: Floor to Ceiling Column Stand
DESCRIPTION: Titanx100 RADIOGRAPHY RATING: 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT : 8KW RECTIFICATION: Full Wave Rectified TIMER: 0.06 to 5 sec DIGITAL DISPLAY: Digital Display of mAs, kV & mA X-RAY TUBE: XD-3/Imported POWER SUPPLY: 230 Voltage AC, 15 Amps LINE REGULATION: 10% 0.6max PROTECTION: Electronic overload Protection TUBE STAND: Counter Balance Mobile
DESCRIPTION- TITANX 100 RADIOGRAPHY RATING- 25-100mA, stations 45kVp to 100 kVp in 15 steps OUTPUT 8KW RECTIFICATION- Full Wave Rectified TIMER- 0.06 to 5 sec DIGITAL DISPLAY- Digital Display of mAs, kV & mA X-RAY TUBE- XD-3/Imported POWER SUPPLY- 230 Voltage AC, 15 Amps LINE REGULATION- 10% 0.6max PROTECTION- Electronic overload Protection TUBE STAND- Spring Balance
Switch Probe Pogo Pin SWP298 Series for Electronic Test Switching Probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force
