Hi, We Can Supply Tar / Bitumen... Our company RRG Commercial Brokerage LLC has been negotiating with Tar / Bitumen manufactures for competitive prices We would like to state that we have made breakthroughs and are in a position to get attractive prices for below, Tar / Bitumen Kindly share your requirement with an Official LOI. Thanks
PEIROLEUM ASPHALT
Bitumen In New Steel Drums..Importer And Exporter.
Bitumen 60/70.Exporter
Vacuum residue after heat exchanged with feedstock oil, it enters in to oxidation tower. As air is blowing from the bottom of oxidation tower, vacuum residue in the tower is oxidizing reacting with air. Fresh water is sprayed from the top of oxidation tower to control the temperature of gaseous phase temperature not higher than 160 c. Tail gas from the top of oxidation tower will flow in to a saturator, tail gas contact with water and cooled down to have the dirty oil separated away from gas. The residual gas discharged from the top of saturator will flow in to water sealed tank. And residual gas discharged from the top of water sealed tank will be sent to residual gas incinerator, which will be discharged to air after burnt in a incinerator. The heat energy produced from tail gas can be used for heating up of the feedstock oil before entering in to vacuum tower. The dirty oil discharged from saturator will flow in to residual oil tank, and then pumped out of unit periodically. Circulating diesel is pumped in to asphalt-diesel heat exchanger through diesel circulating pump to make its temperature increased from 65c to 140c. The hot diesel will be cooled through diesel cooler with circulating water to have it down to 65c. The cooled diesel will be sent back to diesel circulating tank. Compressed gas from the system pipe lines enters in to bottom of oxidation tower. Saturator, residual oil tank, diesel tank are in the same case. The degree of asphalt from 60-120 is controlled by the vacuum distillation extraction level, oxidation duration and air blowing quantity. Wooden case
Our seller commissioned sales Indonesia's national highest grade rock asphalt ore our seller got the qurota 30,000 to 60,000 tons per month If interested Please send LOI to our seller the indonesia's 3RD H.K company cif to chinese southern port 262usd/mt we only work with end buyer or his mandate
Petra Sulphonated Asphalt is a high-performance drilling fluid that is formulated using a blend of sulphonated asphalt, polymers, and other additives. Sulphonated asphalt is a byproduct of the refining of crude oil, which has been modified through a chemical process to improve its properties for use in drilling fluids. This type of drilling fluid is designed to offer superior rheological properties, fluid loss control, and shale inhibition, which can help to reduce the risks and costs associated with drilling in challenging environments. Overall, Sulphonated Asphalt drilling fluid is a reliable and cost-effective solution for drilling operations in demanding environments. Drilling in shale formations: Sulphonated Asphalt Drilling Fluid is highly effective in inhibiting the swelling and disintegration of shale formations, which can help to reduce the risk of lost circulation and other problems when drilling in shales. 1) High-temperature drilling: Sulphonated Asphalt Drilling Fluid is stable at high temperatures, making it suitable for drilling operations in geothermal wells and other high-temperature environments 2) Wellbore stabilization: Sulphonated Asphalt Drilling Fluid is designed to minimize the amount of fluid that is lost into the formation during drilling, which can help to improve wellbore stability and prevent costly good control issues 3) Horizontal drilling: Sulphonated Asphalt Drilling Fluid can be used in horizontal drilling operations to reduce friction and improve drilling efficiency 4) Elevate your drilling processes with our premium range of specialty chemicals. From drilling mud additives to fluid loss control solutions, our meticulously crafted chemicals are tailored to boost efficiency and minimize downtime. Explore our comprehensive selection today. SULPHONATED ASPHALT ADVANTAGES: 1) Superior rheological properties, which provide excellent control over the viscosity and gel strength of the fluid, reducing the risk of stuck pipe and other issues. 2) Exceptional fluid loss control, minimizing the amount of fluid that is lost into the formation during drilling, improving wellbore stability, and preventing well control issues. 3) Effective shale inhibition, inhibiting the swelling and disintegration of shale formations, reducing the risk of lost circulation and other problems when drilling in shales. 4) Stable at high temperatures, making it suitable for drilling operations in geothermal wells and other high-temperature environments. 5) Can be used in horizontal drilling operations to reduce friction and improve drilling efficiency. 6) A cost-effective solution for drilling operations in challenging environments, reducing the risks and costs associated with drilling.
Petroleum products like bitumen, fuel oil, rpo, diesel, gasoline, naoh, paraffin wax, base oil, chemicals, mea, koh, pvc, benzene, potassium sulfate, urea, dap, potassium chloride, xylene, propylene, ethylene, different types of catalysts, chemical fertilizers, npk, industrial raw material, sulfur, gypsum, cement, phosphate rock, silicon carbide, alumina.Trade
Item sulfonated asphalt sodium Certification iso9001 & iso14001 Usage: petroleum additives Place of origin: henan china (mainland) Best selling nations: saudi arabia, russia, canada, usa Annual sales: 16000 tons Sulfonated asphalt sodium package: ton bags or 25kg or 50lb per sack, sealed in 4-in-1 compound paper bag with plastic lining, or packed according to the clients' requirements.
* Stabilize shale stratum * Reduce rotative torque and prevent jamming * Substitute of oil, including crude oil, waste engine oil and diesel oil * Depress the solid expansion of drill chips * Produce thin and tenacious mud cakes. 25Kg net sealed in 4-in-1 compound paper bag with plastic lining.
Hw-7 is a heat-resistant aging, environmental protection, non-cationic, non-amine, two performances antistripping agent. Solve the antistripping agent prevalent poor heat aging and environmental pollution problems, improving the aging resistance of asphalt, waterproof and antistripping of asphalt. The two performances peculiarity of the product can effectively solve antistripping agent and stone and asphalt compatibility problems, it's a new generation of antistripping agent.
Main characteristics Novel structure and compact design make it easy to install and transfer Main parts adopts international famous brand product with credible capability Lower running cost high aggregate and asphalt weighing accuracy It can realize auto control, semi-auto control and manual control. Aggregate supply system adopts modularization structure and frequency conversion timing, making material delivery smooth. Without phenomenon such as block, obstruct and so on. The heat up area of Dryer drum uses patent technology, which can make full use of heat energy. Dressed heat preservation material to reduce heat loss and have aggregate material drying effectively. Mine material, dust and asphalt weighing systems which adopt three sensors without disturbing data collection can calculate exactly, steadily, credibly and efficiently. The dust cleaning system of whole machine are designed on a basis of meeting the discharge request of environment std for sure at the clientsí» request and local environment defense condition.
Bitumen VG 30 packed in drums available for immediate sale at Mundra port ( India). Total Quantity 500 MT in drums of 180 Kgs. Direct BL transfer to the prospective buyer against 100% payment.
Huge qty bitumen pitch available CIF China.
Through technological innovation, the use of independent proprietary technology, a series of optimized combination of processes, and the use of gas chromatography, differential scanning calorimetry, infrared spectroscopy and other microscopic means of detection of the product carbon peaks, the number of carbon atoms, molecular weight, enthalpy, components and other performance testing, research and development of a series of warm mixing asphalt modifier products. It can be applied to different matrix asphalt and various modified asphalt viscosity reduction requirements.
PROPHALTis a revolutionary, high-performance, flexible, reactive repair product for use in repairing asphalt and concrete road surfaces PROPHALT reacts with water to provide a permanent repair solution. All sizes are free of solvents or volatile organic compounds (VOCs). PROPHALT comes in three (3) sizes (4.0mm, 6.0mm, & 9.0mm) for surface, intermediate, or base repairs for any type of asphalt or concrete road repair.
Origin - India, American & china Packaging - 25K Bag- 55 LB's Bag
It is an elastomeric waterproofing membrane, manufactured from a rich mixture of bitumen and selected APP (Atactic polypropylene) polymers blended together to obtain excellent heat & UV resistance and waterproofing properties. The polymerized bitumen is coated onto a dimensionally stable reinforcement core of non-woven spun-bond polyester rot-proof fabric. Area of Application â? Inverted roofs & parapets â? Terraces, balconies & patios Pack Unit Unit/Pallet 10mx1mx4mm Roll 20
Bitumen 60/70 shall be 50 % and Kerosine 50% Packed in Flexi Tank
Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water. Therefore, bitumen emulsion is a dispersed liquid consisting of three products, i.e. water, bitumen and emulsion. Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water. Uses Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions. Advantages a) Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. b) Lower costs are incurred due to a considerable saving on fuel for heating purposes. c) Operating at lower temperatures for cold mixing gives a greater margin of safety, even though these emulsions may contain fluxing oil. d) Not only may cold mix be stockpiled for long periods, but it may also be packaged in small containers and stored. This facilitates the treatment of very small areas quickly, cleanly and economically. Disadvantages A regular water supply is required and this can be a great problem in very hot countries, where water can be in very short supply. Price of Product (USD) : 432 Product Origin : Merco W.L.L Bahrain Key Specifications / Special Features : Type Viscosity @25°C Penetration & Solubility Residue Tack Coat K1- 40 25 Max 60- 200 & (97.5) 38% Rapid Setting RS-1K 20-50 60- 200 & (97.5) 50% Rapid Setting K1-60 -NA & (97.5) 57% Rapid Setting CRS-160- 200 & (97.5) 60% Rapid Setting CRS-2-60- 200 & (97.5) 65% Rapid Setting K1-70NA & (97.5) 67% Medium Setting K2-NA & (97.5)57% Medium Settng CMS 2-60- 200 & (97.5) 65% Slow Setting K3 20- 100 60- 200 & (97.5) 56% Slow Setting CSS-1 20- 100 60- 200 & (97.5) 57% Minimum Order size and packgaing detail 16.00(=/-3%) Metric tons per 20 Foot Container. 200 kgs(+/-3kgs) in one drum.Total no of drums in 1 container 80
