Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120 150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110. 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Waterborne Acrylic Modified Saturated Polyester Resin Can be cured at between 120150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating. Performance Advantages: Low odor LOW VOC Non yellowing, even at high temperature curing Good hardness development Applications: All kinds of baking systems Metal primer and topcoats Industrial applications Spray, roller, brush or dipping can be used. 1, Product Composition: Waterborne Acrylic Modified Saturated Polyester Resin, Cosolvent 2, Typical Data: Type of polymer Waterborne acrylic modified saturated polyester resin Non-volatile(%) 70±2 Viscosity( 25, mpa*s) 30-70* PH ---- Neutral.agent Non neutralization OH value on solids (mgKOH/g) 105 Air dry Inapplicable Cross-Linking with amino resin Applicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3, Product Properties: Good hardness (>4H), high gloss; Good flexibility; Good solvent resistance; Low temperature fast cross-linking (110 20minutes); Excellent shear stability, can be grinded with dispersions directly. 4, Instructions: WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120â??. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying. PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce. 5, Storage: It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections. 6, Applications: Amino-baking top coatings. 7, Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
HORN PLATE We are online Handicraft vendor, offering hassle free Handicraft solutions worldwide. With increase in technological advancements, we came up with the online supply solutions of Handicraft. With a highly skilled and diligent workforce of over 50 craftsmen, we can work across all Handicraft products ranging from high fashion jewelry, cutlery to gift items. Our craftsmen have a vast experience in handmade products like Viking mugs, bangles, earrings, kitchen accessories like spoons & bowls etc. We work with more than 10 companies: leading retailers, wholesale importers and start-up companies worldwide. We can provide a global supply of goods at your orders. Best Quality buffalo horn plates for optical glasses frames cow horn black horn plate Plates made from African cow horn with steam heating and pressing. Suitable for optical frames, knife handle, intarsia, restoring (in place of tortoise shell), jewellery and lighting objects We recommend this natural handle material product for its durability and good looks. It works great for all types of handle projects, especially folding knives and inlays. These flat top scales are made from natural Cow horns. They look really great on your knives, instruments and gun handles, and also adds excellent value to your finished work. Color: Black with White Stripe, Brown & Light Brown Sizes: 160x60mm, 160x55mm, 160x45mm, Rectangle Plates 380x38x2-6mm , Square Plates160x60x5-6 mm Thickness: 2-3-4-5-6-7mm Design: White/Brown/Black Horn Plate Use: For Optical Frames, available for sale black and white streaks Description Horn Type: Cow Horn Small Horn Plates = 120x25x4mm Small Horn Plates = 110x25x4mm Small Horn Plates = 110x20x4mm Small Horn Plates = 100x15x3mm Small Horn Plates = 90x15x3mm Small Horn Plates = 80x15x3mm Small Horn Plates = 70x15x3mm Small Horn Plates = 60x15x3mm Available on request Thin Plates 6x4 x 1.50-2 mm 6x3x 1.50-2 mm 5x4 x 1.50-2 mm 5x3 x 1.50-2 mm 4x3 x 1.50-2 mm 3 x2 x 1.50-2 mm Price Available on request
Products Description Glycerol is a colorless, viscous, hygroscopic, sweet-tasting trihydric alcohol. It is also called glycerin or glycerine, with the term glycerol being preferred as the pure chemical form and the term glycerin(e) being primarily used when the compound is used commercially in various grades. Application 1) In medicine, it is used to making various preparations, solvent, hygroscopic agent, antifreeze and sweeteners, preparation for external use ointment or suppository, with glycerol nitroglycerin used for explosive materials. 2) In the coatings industry, it is used for making all kinds of alkyd resin and polyester resin, epoxy resin and glycidyl ether. 3) In textile and printing industry, it is used for preparing wetting agent hygroscopic agent, fabric anti-creasing shrink proof treatment agent, dispersant and penetrating agent. 4) In the food industry , it is used as sweetener, tobacco hygroscopic agent and solvent. 5) In addition, in the paper, cosmetics, leather, photography, printing, metal processing rubber and other industries widely application.
Physical property: Melting Temperature: -49 ºC Boiling Temperature: 240-243 ºC Density at 20ºC, g/cm3 : 1.204 Flash Point: 123 ºC Ignition Temperature: 455 ºC Packaging Details 250kg drum;1200kg/IBC; 23-24MT ISO TANK Application: 1. Reactive diluents for urethane and epoxy resins 2. Cleaner and degreasers 3. Chemical intermediates 4. Cosmetics additives 5. Electronic industry(media) as filler 6. Paint stripper 7. Foundry sand binder, wood binding resins 8. Coal mining ,excavation and tunneling 9. Removal of CO2 from Urea manufacturing, oil gas, natural gas etc 10. Setting agent in chemical grouting to get easily controlled gel time
A type of basic resin.It is colorless or light yellow with low toxicity.It is widely in many fields such as coating,paint and antisepticising. Brand: Solid epoxy resin CYD-011 Epoxy equivalent(g/eq): 450~500 Hydrolysable chlorine, wt% : 0.1 Softening point(C):60~70 Soluble viscosity  (25C): D~F Volatile, wt% 0.6 Color (gardner) 0.5 Equivalent to the product of other company: DER671(DOW);1001(SHELL);NPES901;E-20
The fish scale polypeptide has an inhibitory activity on angiotensin converting enzyme. Therefore, it is a very important means to recover the fish scale by decalcifying the fish scale and preparing a certain active polypeptide by enzymatic hydrolysis. However, a large amount of inorganic salts remain in the enzymatic hydrolysis process, which affects the activity. Therefore, more and more researchers are beginning to use adsorption resin treatment as the first step in the separation and purification of enzyme products. Suzhou Bojie Resin Technology Co., Ltd. provides macroporous adsorption resin not only to achieve desalination at the same time, but also to obtain components of different polarities. The method is simple and easy to operate, low in cost, large in processing amount and short in time, and exhibits obvious advantages in separation and purification of the polypeptide.
In the past, collagen was extracted from mammals (bovine, pig, chicken, etc.), which easily left the bacteria and endangered human health. The study found that fish scales are also rich in collagen, and deep sea fish scales are not polluted. The fish scale collagen peptide is most easily absorbed by the body, supplements the lost collagen, has the function of reorganizing the skin fibrous structure, promoting cell metabolism and repairing tissues. The fish scale collagen peptide extraction resin provided by Suzhou Bojie Resin Technology Co., Ltd. can effectively extract collagen peptides from fish scales, has large adsorption capacity, high adsorption efficiency, is not affected by the presence of inorganic substances, and desorbs. The conditions are mild, the regeneration is simple, and it can be regenerated with ethanol. The use period is long, no secondary pollution will occur, and it has good economic benefits and does not pollute the environment.
SPSi-100 is a high performance matrix resin product used for tin-free self-polishing paint, it is only suitable for copper-containing formulations and can be blended with various amounts of CDP (Rosin) to satisfy different application requirements. The tin-free self-polishing antifouling coatings prepared by SPSi-100 could possess 4-5 years performance (the actual antifouling performance determined by paint formulation, ships speed & activity and sailing sea area environment), low VOC and excellent polishing rate. Use: for anti fouling marine paints Packing:190kg drum Storage: in a shady, dry and ventilated place, avoid high temperature and fire contact.details pls refer to MSDS. Supplier: WUXI HONOR SHINE CHEMICAL CO .LTD
SPZn-100 is an economical matrix resin product used for tin-free self-polishing paint, it is only suitable for copper-containing formulations and must be blended with CDP (Rosin). The tin-free self-polishing antifouling coatings prepared by SPZn-100 could possess 3 years performance (the actual antifouling performance determined by paint formulation, ships speed & activity and sailing sea area environment), low VOC and steady polishing rate.
Epoxy Resin is an organic compound containing two or more epoxy groups in a molecule. The cured epoxy resin has good physical and chemical properties, which has excellent bonding strength on the surface of the metal and nonmetal material. Besides, due to its good dielectric properties, good stability, high hardness, good flexibility, stable solubility in alkali, it is widely used as pouring, impregnation, laminated materials, adhesives, coatings and other purposes in national defense, national economy departments.
Applications: Plastic coating. High gloss non-yellowing top-coats for OEM / industrial segment. (With aliphatic isocyanates) Chemical-resistance top-coats. High-quality vehicle finishes. Advantage: Excellent color and gloss retention. Good exterior durability. Fast-drying. ï?· Excellent soap and detergent resistance. ï?· Excellent chemical & stain resistance. ï?· Excellent adhesion and high gloss properties. ï?· Excellent leveling properties.
CAS No.:61788-97-4 Other Names:3:1 Epoxy Resin glue Place of Origin:Guangdong, China Classification:Double Components Adhesives Main Raw Material:Epoxy Usage:Construction, Fiber & Garment, Footwear & Leather, Transportation Brand Name:N&S Model Number:HX-EP31-009 Type:Liquid Feature::Eco-friendly Appearance::Clear Colorless Liquid Color:Transparent Liquid
CNMI Industrial Epoxy Resin is the most advanced level of shine, gloss, reflectivity, clarity and depth, and it locks in those optical qualities forever. The most sophisticated system of synthetic polymeric-based protection available. Our Commercial-grade epoxy is engineered specifically for Bar Tops, Tabletops & Countertops. 100% VOC free. Virtually odorless. Use in odor-sensitive areas such as wineries, restaurants, kitchens, or confined spaces. CNMI Industry epoxy will out perform, out protect, outshine and outlast anything on the market
One-part Waterborne Epoxy Ester Resin WL-172 epoxy coating contains the following added features: Extremely Long Lasting Flexible & Durable Water resistant High-Gloss Heat Resistant Economical Reduces Maintenance Costs Lead-free Nontoxic Rustproof One Application Only Acid & Saltwater Resistant Protects Against Environmental Hazards High Adhesion 1,Product Composition: Waterborne Epoxy Ester Resin, Cosolvent, Neutralizing Agent, Water 2,Typical Date Type of polymer Waterborne epoxy ester resin Non-volatile(%) 70�±2 Viscosity( 25â??, mpa*s) â?¤200* PH ---- Neutral.agent DMEA OH value on solids (mgKOH/g) ---- Air dry Applicable (Oxidation Cross-linking) Cross-Linking with amino resin Inapplicable Grinding Applicable Drying speed better Corrosion resistance better weatherability better PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether 3,Product Properties: Excellent anticorrosion performance, especially for the preparation of anti-rust base coating; Fast drying speed, good hardness; Excellent salt fog-spray resistance and early water resistance: Good storage stability; Excellent shear stability, can be grinded with dispersions directly. 4,Instructions: WL-172 can be diluted with deionized water or lower alcohol or alcohol ether to white emulsion. It can be dried by oxidation cross-linking addingoily/water driers at normal temperature or low-temperature baking. The oily driers need to be diluted by the solvent such as butyl alcohol or ethanolfor use. The water dispersion of WL-172 is stable at neutral or slight alkaline conditions pH value has to be carefully observed in coating production sinceprecipitation may occur if acidic pigments like carbon black are used in the system. PH value of the coating system can always be adjusted triethylamine or N, N-dimthylethanolamine. Viscosity of the dispersion will increase as the PH value increases. 5,Applications: Air-drying or low temperature baking antirust coatings. 6,Note: The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
High quality heavy duty trolley specially made for jumbo cylinders for transporting and standing. Two strong 6 inches wheels provided in the back and special handle provided on the top to easy movements of cylinders. Made of strong and precise steel tubes/pipes with heavy base made of steel flats. Finish: pre-treated and epoxy powder coated
We are a leader in the supply of e-scrap whether be it Gold board , Computer reels, Phone mother board, Stm ic, Computer rams, Computer reels, Cpu I core, Hard drive scrap,Xilinx ic
We are a leader in the supply of e-scrap whether be it Gold board , Computer reels, Phone mother board, Stm ic, Computer rams, Computer reels, Cpu I core, Hard drive scrap.
We are a leader in the supply of e-scrap whether be it Gold board , Computer reels, Phone mother board, Stm ic, Computer rams, Computer reels, Cpu I core, Hard drive scrap.
We are a leader in the supply of e-scrap whether be it Gold board , Computer reels, Phone mother board, Stm ic, Computer rams, Computer reels, Cpu I core, Hard drive scrap.
