The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Jet fuel (jet a1), cement and acrylic based waterproofing products elastrometic resin based waterproofing products , sugar polyurethane based waterproofing products bitumen based products epoxy based products floor systems.
Beverages, soft drinks, wood timber, wood lumber, wood pellets, sawn wood, charcoal, pallets, wood pellets, urea fertilizer.
Hospital and horeca group disposable / consumable products, personal protections, mask n91 95 , nonwoven gowns, coveralls & medical towels, patient bibs, medical papers & converting roll services.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Can supply TEXTILE WASTE WHITE FABRIC CLIPS CUTTINGS NON WOVEN BALES Composition of clips cuttings approx 60 POLYESTER approx 30 VISCOSE and approx 10 TENCEL LYOCELL May have foreign bodies approx 1 comes from baling procedure POST INDUSTRIAL MATERIALS COME FROM FACTORY THAT PRODUCE BABY WIPES Can load in 1x40HC container approx 22 MT 10
A7 99.7 aluminium ingots
Iridium, adblue, urea, copper, petroleum derivatives (en 590, jet a1, jp54, d6, d2).
Refined petrochemicals, ulsd10ppm diesel, gasoil.Trade, buying and exporting
Fabrics, yarns, machinery, agriculture products, faucets, vegetable oil, whipped cream.Import, export, distributor and agent
RECECOAT # SINGLE COMPONENT PU BASED
RCS 002 BITUMEN EMOLUSION ( BITUMEN PRIMER ) RCS 001 BITUMEN ( BITUMEN PRIMER ) RCS 003 BITUMEN RUBBER SOLUTION WATERPROOFING RCS 004 SBS RUBBER BASED ELASTROMETRIC LIQUID MEMBRANE RCS120 BRB ANTI ROOT ELASTIC BITUMEN LIQUID MEMBRANE RCS ECO RUBBER BASED LIQUID BITUMEN MEMBRANE RCS 1C RUBBER MODIFIED , WATER BASED ELASTROMETRIC BITUMEN MEMBRANE SCS 2C RUBBER BASED , CEMENT AND FIBRE MODIFIED 2 COMPONENT BITUMEN MEMBRANE
Petroleum Products: Aviation Kerosene Colonial Grade JP54 Mazut M100 GOST-10585 D-2 Gasoil-Diesel L-0.2-62 GOST 305-8 Russian Virgin Fuel Oil (D6)
It is mainly used in making polyester, polyester resin, hygroscopic agent, plasticizer, surfactant, synthetic fiber, cosmetics and explosives, as solvent for dyes/inks, antifreeze for engine, gas dehydrating agent, manufacturing resin, wetting agent for cellophane, fiber, leather and adhesive. It can produce synthetic resin PET, fiber grade PET namely polyester fiber, bottle chip grade PET for making mineral water bottle, etc. Also can produce alkyd resin, glyoxal, etc., also used as antifreeze. In addition to being used as anti-freeze agent for automobile, it is also used for conveying industrial cooling capacity, which is generally called refrigerant carrier.
Molecular Formula: Na2O SiO3 Cas No.: 6834-92-0 Appearance : white, uniform, beaded. Characteristics: This product possesses high alkaline and defoul character, which is easy to soluble in water, good dispersibility and emulsifiability, not soluble in alcohol. Na2O - 28.0-30.0% SiO2 - 27.3-29.2% Whiteness - 80% Min Fe - 100ppm Max Bulk density - 0.80-0.97g/cc Particle Size(14-60mesh) - 90% Min
Applications 1. Mainly used in electroplating industry. 2. Used as a catalyst for preparing polyethylene by phillips process under medium pressure. 3. Used for the preparation of analytical reagent, strong oxidant and chromate. 4. Used as catalyst for synthesis of polyethylene. 5. Used in electroplating industry, medicine industry, printing industry, tanning leather and fabric mordant dyeing.