Sweet Coconut Cream Powder Characteristics. Physical: Appereance & Color : Creamy white, free flowing powder. Flavour/Odour : Sweet natural coconut flavour, free from foreign or objectionable flavour/odour. Chemical: Fat Content : 17 + 1%. Free Fatty Acid (as lauric acid of extracted oil) : 0.80% maximum. Dry Matter : 20.00 - 25.00 %. Peroxide Value : 73.00 - 80.00 %. Moisture Content : 73.00 - 80.00 %. pH : 6.00 minimum. Heavy Metal: Pb : 0.1 mg/kg maximum. Cd : 0.1 mg/kg maximum. Hg : 0.03 mg/kg maximum. As : 0.1 mg/kg maximum. Microbiological: Standard Plate Count : 5.000 cfu/gram maximum Yeast : 50 cfu/gram maximum Mould : 50 cfu/gram maximum Caliform : 100 MPN/gram maximum E. Coli (Type 1) : Negative/1 gram Salmonella : Negative/25 gram Staphylococcus aureus : 10 cfu/gram maximum
Product Name: Guarana Powder Product Code: WH3001 Description: Product obtained by hydroalcoholic extraction of the Paullinia cupana (sapindaceae) seeds, and then spray dried. due to its energetic properties make it suitable for use in various applications in the food industry. Common Uses and Orientative Dosage: Food supplement 300.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Brown Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION ID Test Positive Caffeine Min. 22.00 g/100g Specific Gravity at 25°C 0.30 g/mL - 0.60 g/mL Moisture Max. 5.00 g/100g pH 4.20 - 5.20 CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Max. 1000 CFU/g Escherichia Coli Negative/g Yeasts and Molds Max. 100 CFU/g Salmonella Negative/25g Staphylococcus Aureus Negative/g Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
Product Name: Acerola Powder Product Code: WH2001 Description: Product obtained from selected fruit (Malpighia emarginata )which juice is dehydrated by atomization (spray dryer). Common Uses and Orientative Dosage: Powder/solid mix for drinks 230.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Ivory Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION Loss on drying at 105 °C Max. 5.00 g/100g Ascorbic Acid Min. 17% Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Total Ash Max. 5.00 g/100g Moisture Max. 6.00 g/100g pH 2,80 - 4,20 CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Max. 1000 CFU/g Escherichia Coli Negative Yeasts and Molds Max. 100 CFU/g Salmonella Negative Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
SENSORY ANALYSIS SPECIFICATION METHOD Color Clear Yellow To Yellow Amber Internal Method Aspect Liquid Internal Method PHYSICAL & CHEMICAL ANALYSIS SPECIFICATION METHOD Spilanthol Content (GLC) Min. 30% Internal Method Refractive index at 20 �°C 1,454 - 1,494 Internal Method Specific Gravity at 25�°C 0,920 - 1,000 Internal Method HEAVY METALS SPECIFICATION METHOD Arsenic Max. 3 ppm Internal Method Mercury Max. 1 ppm Internal Method Cadmium Max. 1 ppm Internal Method Lead Max. 10 ppm Internal Method MICROBIOLOGICAL ANALYSIS SPECIFICATION METHOD Escherichia coli Negative/g Internal Method Salmonella spp. Negative/25g Internal Method Total Plate Count Max. 1.000.000 UFC/g Internal Method Staphylococcus aureus Negative/g Internal Method Shelf Life: 18 months if stored according to instructions. Storage conditions: Store in a tightly closed container with minimum headspace in a cool, dark and dry place.
Conventional and CNC-controlled shearing machines Sheet metal shearing machines are a must for most fabrication shops. Used to cut material and plate to size, they produce clean, straight edges and angles reliably with minimal material waste. Details Show FAQ: 1.Are you a manufacturer? Yes absolutely. Welcome a lot for your visiting to us. 2. how can we guarantee quality? Always a pre-production sample before mass production Always final Inspection before shipment. 3.How to pay for the machine? Payment term: 1) 30% /70% T/T before delivery;2) irrevocable L/C at sight. 4.Do you have after-sale support? Yes, we're always here for giving you advice and support for technical details since we have senior technician. 5.Is there quality control when manufacturing the lines? A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft,assembling,testing and packaging. 6.What's your strength comparing to the other supplier? A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Helios 14k Real Gold Miami Cuban Link Chain with Spring Link Bracelet Cuban Style Product Description: Stamp : 14K Real Gold Miami Cuban Link Chain with Spring Link Bracelet Cuban Style Chain Style: Miami Cuban Link Monaco Chain Bracelet Material: 14K Real Gold Metal Stamp: 14K Available Length: 18 cm (7 inch) & 20 cm (8 inch) & 22 cm (9 inch) These Chains are 100% Authentic 14K Gold "Not Plated or Filled" "Make a bold statement with our 14K Real Gold Miami Cuban Link Bracelet. Meticulously handcrafted, this bracelet showcases the iconic Miami Cuban link design that seamlessly blends classic opulence with contemporary style. Crafted from genuine 14K gold, it exudes a luminous, luxurious glow that speaks to your refined taste in jewelry. The substantial links not only create a visually captivating accessory but also ensure durability and lasting comfort. Whether worn solo for a striking effect or paired with other favorites, the Miami Cuban Link Bracelet is a symbol of individuality and elevated elegance. Elevate your accessory collection with this exquisite bracelet, embodying the artistry of genuine gold craftsmanship." HeliosJewelries
Helios 14K/18K Real Gold Rolo Chain Necklace 8.50 mm Product Description: Stamp : 14K/18K Real Gold Rolo Chain Necklace Chain Style: Diamond Facet Rolo Chain Necklace Material: 14K/18K Genuine Gold Metal Stamp:14K/18K Available Length: 55 cm (21 inch) & 60 cm (23 inch) Width: 8.50 mm These Chains are 100% Authentic 14K/18K Gold "Not Plated or Filled" "Discover the timeless elegance of our 14K/18K Real Gold Rolo Chain Necklace. Meticulously handcrafted, this necklace features a delicate yet captivating rolo chain design that seamlessly marries classic charm with modern style. Crafted from genuine 14K or 18K gold, it radiates a brilliant, luminous glow that adds a touch of luxury to any neckline. The interlocked rolo links not only create a visually appealing accessory but also ensure durability and comfort. Whether worn as a standalone piece to make a statement or layered with other favorites, the Rolo Chain Necklace is a symbol of individuality and refined taste. Elevate your jewelry collection with this exquisite necklace that embodies the artistry of genuine gold craftsmanship." HeliosJewelries
Helios 14K/18K Real Gold Rolo Chain Bracelet 7.00 mm Product Description: Stamp :14K/18K Real Gold Rolo Chain Bracelet 7.00 mm Chain Style: Diamond Facet Rolo Chain Bracelet Material: 14K/18K Genuine Gold Metal Stamp: 14K/18K Available Length: 18 cm (7 inch) & 20 cm (8 inch) & 22 cm (9 inch) Width: 7.00 mm These Chains are 100% Authentic 14K Gold "Not Plated or Filled" "Elevate your wrist game with our meticulously crafted 14K/18K Gold Rolo Chain Bracelet. Designed with precision, this bracelet features a delicate yet captivating rolo chain design that seamlessly marries classic elegance with contemporary flair. Fashioned from genuine 14K or 18K gold, it radiates a brilliant, luminous glow that adds a touch of luxury to any ensemble. The interlocked rolo links not only create a visually appealing accessory but also ensure durability and comfort. Whether worn as a standalone piece or paired with other favorites, the Rolo Chain Bracelet is a symbol of individuality and refined taste. Elevate your accessory collection with this exquisite bracelet that resonates with those who appreciate the artistry of genuine gold craftsmanship." HeliosJewelries
SMC (Sheet Moulding Compound) water tanks are made of a composite material consisting of thermosetting resin, glass fibers, and mineral fillers. The material is molded into panels and then assembled to form a water tank of the desired size and shape. SMC water tanks are durable, lightweight, and resistant to corrosion, making them ideal for outdoor and indoor applications, such as residential, commercial, and industrial water storage. GRP (Glass Reinforced Plastic) water tanks are also made of composite material, but they use a different manufacturing process. GRP tanks are made of layers of fiberglass reinforced with resin and formed into a seamless, one-piece vessel. Like SMC tanks, GRP tanks are lightweight and durable, and they are also resistant to corrosion and UV radiation. They are commonly used for industrial applications, as well as for residential and commercial water storage. GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness.
GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness. Rational capacity design Various panel designs are used to design tanks of all capacities and dimensions. Convenient installation Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation. Excellent thermal protection Single panels are used for water tanks installed underground, while the insulated panels, which are single panel with insulation material compressed together, provide excellent insulation on water tanks installed outdoors.
12 Pin Round Connector A 12-pin round connector is an electrical connector with twelve circular pins or contacts that are used for transmitting electrical signals, power, or data. These connectors come in various sizes and configurations, and their usage can vary depending on the specific application. Features 4U Gold Plating Terminals Real Gold Plating, Strong Conductivity Without Oxidize, Extend Service Life International Certification We have passed a number of domestic and international certifications, such as China CQC (former CCC), Germany TUV, and USA UL. Multiple certificates are for your protection. Current 5-20A Optional Different Pin number meets different current and will meet power and signal used at the same time. Application Cases of Security Equipment Monitoring system, Information Security Door, Outdoor video monitor Applications 12-pin round connectors are used in a variety of applications, including: Audio and Video: They are commonly found in the audio-visual industry for connecting cameras, microphones, and other audio or video equipment. Industrial Control: In industrial settings, these connectors may be used for connecting sensors, control systems, and machinery. Automotive: Some automotive applications require 12-pin round connectors for power distribution, lighting, or data connections. Medical Equipment: In the medical field, these connectors can be used in medical devices and diagnostic equipment. Advantages Our wide range of circular connectors is always the ideal solution Reliable transmission of signals, data, and power thanks to plastic + metal housing Savings in connection times through innovative connection solutions for devices with all industry-standard protection classes The high degree of flexibility for individual adaptation to your requirements.
Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuit fabrication base material is FR4/Teflon/Ceramic, pcb fabrication used in high-power power supply and motor circuits products. HUIHE CIRCUITS is one of the heavy copper PCB manufacturers, we have passed ISO9001/ISO13485/IATF16949/UL/RoHS/REACH certification.If you want to know more about thick copper pcb, heavy copper pcb, please contact HUIHE Circuits heavy copper pcb board manufacturer. Heavy Copper PCB List 2 Layer ENIG Heavy Copper PCB circuit manufacturer 4 Layer ENIG Heavy Copper PCB 6 Layer ENIG Heavy Copper PCB supplier 6 Layer ENIG Heavy Copper PCB manufacturing 6 Layer ENIG Heavy Copper PCB Fabrication Service 6 Layer ENIG Heavy Copper PCB 8 Layer ENIG Heavy Copper PCB 8 Layer ENIG Impedance Control Heavy Copper PCB 2 Layer ENIG Heavy Copper PCB The Heavy Copper PCB Plating Process Must Achieve The Following Aspects: 1. HUIHE Circuits heavy copper pcb manufacturer adds a certain value according to the area value calculated by the computer and the empirical constant accumulated in the actual production to ensure the integrity of the plating layer in the hole. 2. When the heavy copper PCB is electroplated for 5 minutes, take out the substrate and observe whether the copper layer on the surface and the inner wall of the hole is intact. It is better that all the holes have a metallic luster. 3. A certain distance must be maintained between the substrate and the substrate. 4. When the heavy copper PCB reaches the required electroplating time, a certain amount of current must be maintained during the removal of the substrate to ensure that the surface of the substrate and the hole will not be blackened or darkened. 5. HUIHE Circuits heavy copper pcb manufacturer according to the mechanical processing floppy disk for trial processing, the first part pre-inspection is carried out, and all the workpieces are processed after meeting the technological requirements.
Feature: 1. Not easy to loose, strong and strong. The special expansion part anchoring force is strong 2. Environmental zine layer is more consistent with environment 3. Widely recognized expansive parts in the world Technical data: Thread * Drill hole * Length range * Design/Ultimate drawing force *Design /Ultimate shear force * (mm) * (mm) * (KN) * (KN) M6 * 6 * 40-120 * 5/9.7 * -- M8 * 8 * 50-220 * 8/16 * 6/9 M10 * 10 * 60-250 * 12/24 * 8/14 M12 * 12 * 70-400 * 18/33 * 18/29 M14 * 14 * 80-200* 20/44 * 22/37 M16 * 16 * 80-300 * 22/51.8 * 26/45 M18 * 18 * 100-300 * 28/58 * 28/57 M20 * 20 * 100-400 * 35/70 * 31/62 M24 * 24 * 120-400 * 50/113 * 45/88 Parameter: Electroplate>5mm / Hot dip>5mm Standard: DIN /ANSI/ BS Material: Carbon steel Application: natural stone, metal/wooden structures, cantilever bracket, bottom plate, support plate, bracket, railings, doors and window, curtain wall, machine, beam etc.. Installation 1. Drilling a hole referring to the diameter of anchor, 2. Removing the debris, cleaning the hole, 3. Striking the anchor into the hole, 4. Tightening the bolt with a wrench
12 Pin Round Connector A 12-pin round connector is an electrical connector with twelve circular pins or contacts that are used for transmitting electrical signals, power, or data. These connectors come in various sizes and configurations, and their usage can vary depending on the specific application. Features 4U Gold Plating Terminals Real Gold Plating, Strong Conductivity Without Oxidize, Extend Service Life International Certification We have passed a number of domestic and international certifications, such as China CQC (former CCC), Germany TUV, and USA UL. Multiple certificates are for your protection. Current 5-20A Optional Different Pin number meets different current and will meet power and signal used at the same time. Application Cases of Security Equipment Monitoring system, Information Security Door, Outdoor video monitor Applications 12-pin round connectors are used in a variety of applications, including: Audio and Video: They are commonly found in the audio-visual industry for connecting cameras, microphones, and other audio or video equipment. Industrial Control: In industrial settings, these connectors may be used for connecting sensors, control systems, and machinery. Automotive: Some automotive applications require 12-pin round connectors for power distribution, lighting, or data connections. Medical Equipment: In the medical field, these connectors can be used in medical devices and diagnostic equipment. Advantages Our wide range of circular connectors is always the ideal solution Reliable transmission of signals, data, and power thanks to plastic + metal housing Savings in connection times through innovative connection solutions for devices with all industry-standard protection classes The high degree of flexibility for individual adaptation to your requirements.
Perkins Diesel Engine, Diesel Generator set 50HZ/1500RPM, 380/220V, 400/230V, 415/240V can be adjustable, Open Type, weatherproof type or soundproof type, trailer type and so on. Also have 60HZ/1800RPM, voltage is 220/127V, 380/220V, 440/254V can be option There are Perkins from China, UK, USA and india, all depend on the required model. ATS can be option Controller brand: UK Deepsea, Czech ComAp, Denmark DEIF, Smartgen China Generator Standard Compose: Meet the environmental temperature 40 water tank radiator, Driving belt cooling fans, with fan safety shield 24 V charging generators Generator: Single bearing generator, IP23 Grading Protection, H Insulation degree Shock absorber Dry air filter, Fuel filter, Oil filter Power output circuit breaker Standard control panel 12 V battery and battery connection cables Battery Charger Exhaust pipe, Bellows, Flange, Muffler set 8 hours base tank Documents and Manuals Generator set Genset Model AP1100 Rating Power (KW/KVA) 800/1000 Standby Power(KW/KVA) 880/1100 Rating Ammeter(A) 1519 Diesel Engine Engine Model 4008TAG2 Prime Power(KW) 899 Standby Power(KW) 985 Bore X Stroke (mm) 160X190 Number of Cylinder & Configuration 8 in line Displacement (l) 30.6 Compression Ratio 13.6:1 Aspiration Turbocharged & After-cooled Max. intake depression(kPa) 6 Combustion air Volume(m³/min) 70 Max. Exhaust back Pressure(kPa) 10 Exhaust Gas Flow(m³/min) 201 Max. Exhaust Gas Temperature() 485 Cooling Water cooled with Radiator Fan cooling air flow(m³/min) 1074 Total Coolant capacity(l) 188 Max. temperature of coolant() 93 Max. permissible oil temp.() 105 Total oil capacity(l) 166 Rating Fuel Consumption(l/h) 215 Governing Type Electrics Governor Alternator Rating Voltage(V) 380/220 (adjustment) Alternator Model TAL-A49-E Rating Capacity(KW/KVA) 800/1000 Eff.% 94.2% Power Factor 0.8 lagged Exciting type Brushless PMG exciter, AVR Voltage regulation ±0.5% No. of Phase 3 phase 4 wire Enclosure Class IP23 Class of Insulation H Battery Rating Capacity(AH) 4X150AH 12V Generator set dimension (LXWXH) 5300X1870X2500 mm Weight (kg) 7900 FAQ Q: Do you offer OEM service? A: Yes Q: What is your payment term? A: 30% T/T in advance, 70% balance when receiving B/L copy, Or 100% irrevocable L/C at sight. Q: What is your lead time? A: About 15-25 days after receiving advance deposit or original L/C. Q: What certificates do you have? A: We have ISO And we can apply for specific certificates for different countries such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc. Q: What warranty do you provide? A: One year or 1200hours running whichever occurs first, during the guarantee period, we will supply free of the easily damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for Genset maintenance.
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
Electroplating wastewater include the pretreatment rinsing wastewater, plating rinsing wastewater. And the principal pollutants are heavy metal ion . 1.1 Up-to-standard discharge technology The emission of waste water which contains heavy metal ions such as Cr, Cu and Ni must meet the local requirements by adopting the means of Physical and Chemical Reaction + Sequencing Batch Precipitation + Ion Exchange + Compulsory Filtration to reach the standard. 1.2 Electroplating wastewater reuse technology Electroplating wastewater reuse technology means to add reclaimed water reuse system and reuse system on the basis of standardized discharge technology. The effluent can meet reclaimed water reuse standards(such as cleaning). 1.3 Electroplating wastewater zero-discharge technology MVR evaporator Working principle: MVR evaporator will increase the energy of secondary steam by using compressor, and will take advantage of the secondary steam with improved energy to recycle the potential heat of secondary steam. Specifically: Increase the pressure and temperature of the secondary steam generated by evaporator through the adiabatic compression in compressor, and after that, the steam will be fed into the heating chamber of evaporator (heat exchange system) as the heating steam, thus the potential heat of steam can be reused. The cold material will absorb the heat of non-condensable gas through preheating exchanger before being sent into evaporator, so the temperature of the cold material will increase, meanwhile, the condensate can be cooled by this material. This can further improve the utilization ratio of heat.
Chitosan is a biopolymer derived from chitin, which is found in the exoskeletons of crustaceans like shrimps and crabs. It is widely recognized for its biocompatibility, biodegradability, and non-toxicity, making it suitable for various applications. Applications: 1. Biomedical: Chitosan is used in various biomedical applications, including wound dressings, scaffolds for tissue regeneration, drug delivery systems, and dental materials. 2. Nutraceuticals: Chitosan is sometimes used in dietary supplements for its purported cholesterol-lowering and weight loss properties, although scientific evidence supporting these claims is limited. 3. Agrochemicals: Chitosan-based formulations are used in agriculture as biopesticides, plant growth promoters, and soil amendments due to their biocompatibility and biodegradability. 4. Food and Beverage: Chitosan is employed in the food industry as a natural preservative and clarifying agent, as well as in wine and beer production to remove impurities. 5. Cosmetics: Chitosan is utilized in cosmetic formulations for its moisturizing, film-forming, and texturizing properties, appearing in products such as creams, lotions, and hair care products. Specifications- Ash: Less than 1% Moisture: Less than 15% pH: Between 6-8 Degree of deacetylation: More than 75% Viscosity (1% soln. in 1% acetic acid): More than 100cps Heavy Metal (pb): Less than 10 ppm Heavy Metal (As): Less than 1 ppm Total Plate Count: Less than 3000 cfu/g E Coli: Negative