Machine features: The function of automatically install and unload of blades, suitable for precision cutting board saw, electronic cutting saw, aluminum alloy saw blade, multi-blade saw and other series of saw blades. One person can operate more than 10 machines at the same time, greatly save labor cost. Silver solder bending unit continuously variablely programmable in all dimensions. Three groups of rails are adopted for the transmission of tungsten carbide tooth , which improves the running accuracy and service life of rails. Industrial PC with 10inch touch screen system with both language and logo for parameter setting, easy set-up and operation. Automatic teeth selection, feeding, dosing, silver solder foil cutting and folding just through one-stage processing. Welding the tip onto the circular saw blade by control the temperature so that the temperature controlled brazing and annealing cycle allows brazing joints perfectly. Automatically pick up of the brazed circular saw blade and placing it onto the upper pin of the loading magazine in ergonomic control position for the operator . Technical data: Diameter of saw blades:120mm~500mm Rake angle:-5~+25 Tip width: 1.5mm~6mm Brazing accuracy: 0.05mm Thickness of saw blades: 1.0mm~5.0mm Speed of brazing : 6~13s/per tooth General power: 6.0kw The width of silver solder foil: 1.5mm~6mm Diameter of silver wire : 0.5mm Water pressure : 3KG Air pressure: 5KG Electricity: 220 V single phase 50 Hz (wire bigger than 6mm2) Gross Weight: 800KG Dimension : 1600mm *1200mm *1700mm Time of change blades:15~20s/pcs Options: Camera inspection system Ceia induction heating system
Ultra-X RST Pro2 PCI RAM Memory Stress Tester Professional PC Diagnostic R.S.T. 140 Pcs All used in a great condition. Description: RAM Stress Test Professional 2 (RST Pro2) is a memory testing hardware/firmware designed for the rigorous testing needs of memory and system manufacturers, design engineers, and service professionals. RST Pro2 is a Self Booting, Operating System Independent memory diagnostic card for exercising and validating RAM in Pentium through the latest series of Intel Pentium 4/XEON, AMD Athlon XP/MP, and Cyrix/VIA compatible processors. Specifications: Manufacturer: Ultra-X, Inc. Model: R.S.T. Pro2 Memory diagnostic & validation tool With serial port for datalogging Quickly and accurately test and validate memory in desktops, servers, and workstations For use with Intel or AMD x86 compatible 32/64-bit single or multi-core processors For both Base and Extended memory Test up to 64 Gigabytes Uses over 100 test patterns and algorithms Graphic display pinpoints exact location of memory failures Supports the latest SIMM, DIMM, RIMM SRAM, RDRAM (RAMBus), ECC, FB-DIMM, Parity and non-Parity memory technologies Supports DDR-266/333/366/400/466/500, DDR2-533/667/800/1066 Self-Boot technology tests memory without interface of any driver, TSR or operating System limitations
The X-MET8000 is practical, rugged and easy to use to deliver results you can trust. The light and ergonomic design of the X-MET8000 ensures it is comfortable to use on a daily basis. The nose is designed to test material inside bends and corners. Using Hitachi HEROTM window, which is heat resistant, the X-MET8000 can accurately analyze alloys up to 400 C. The X-MET8000 range of handheld X-ray fluorescence analyzers delivers the performance needed for rapid alloy grade identification and accurate chemistry of a wide variety of materials (solid and powder metals, polymers, wood, solutions, soil, ores, minerals etc). The X-MET handheld XRF analyzer (HHXRF) is practical, robust and easy to use to deliver results you can trust. The X-MET series of handheld X-ray fluorescence (XRF) analysers are flexible and easy-to-use for elemental analysis within production environments, manufacturing plants and scrap metals processing. The optimised combination of a high performance X-ray tube & large area silicon-drift detector (SDD) delivers the performance required for the most demanding PMI and scrap metals applications. The Hitachi XMET-8000 comes in 3 configuration options: XMET800 Smart, XMET8000 Optimum and X-MET8000 Expert. X-MET 8000 Optimum can provide results on site in seconds, depending on the application. Phenomenal reliability and speed, with no requirement to return for lab assessment, mean optimum productivity, lower costs and an all-important edge over your competitors. Data can be stored on the analyzer, on a USB flash drive, or through our app and cloud service for immediate sharing. Designed to be portable, simple to use and with a with a 10-12 hour battery life, the X-MET8000 Optimum Geo is able to withstand the harshest environments and weather conditions. It also offers analysis results in seconds with real time data sharing for fast decision making. The Boost technology delivers low levels of detection while the integrated GPS enables users to combine geolocation data with analyses results for flawless site mapping. Key Features: X-ray tube : 40kV or 50kV X-ray tube filters: Single Detector: Large area SDD Max. sample temperature : 100�ºC or 400�ºC with HEROâ?¢ heat resistant window (optional) IP54 rating Protection against detector window damage : Optional window shield Calibrations : Standardless (includes light elements analysis) Integrated camera (Optional) Small-spot collimator (Optional) 6-position filter wheel for the optimised analysis of all elements from Mg to U
For Sale From Manufacturer- River Materials Up To 90 Cm In Diameter - Crushing Screening Plant (crusher) THE OPPORTUNITY TO PURCHASE HIGH-QUALITY, LONG-LASTING CRUSHING-SCREENING-WASHING PLANTS AT AFFORDABLE PRICES IS OFFERED TO YOU. WE PROVIDE 24/7 SERVICE WITH OUR ENTIRE TEAM TO OFFER THE HIGHEST QUALITY PRODUCTS AND SOLUTIONS TO OUR CUSTOMERS LOCATED IN 5 CONTINENTS AND 52 DIFFERENT COUNTRIES. FURTHERMORE, THANKS TO OUR MANUFACTURING QUALITY, WE PROVIDE A 2-YEAR UNCONDITIONAL WARRANTY AGAINST MANUFACTURING DEFECTS FOR ALL OF OUR PRODUCTS. THE WRITTEN PRICE IN THE ADVERTISEMENT IS APPROXIMATE. FOR A CUSTOM PRICE QUOTE ACCORDING TO YOUR NEEDS, PLEASE CONTACT OUR SALES REPRESENTATIVE. MAIN REASONS TO CHOOSE OUR COMPANY WHY MEGA EXPORT & IMPORT Seamless Communication in Your Preferred Language Punctual Manufacturing �¢?? Shipping and Installation Safe Trading with Fixed Price Guarantee 24/7 Online Support with Experienced Export Team Opportunity to Observe and Monitor the Production Process Online Opportunity to Observe and Monitor the Shipping Process Online Free Substructure Planning Project and Trial Production Easier Trading Opportunity with Leasing and Letter of Credit WHY MEGA CRUSHING �¢?? SCREENING - WASHING PLANTS? High Quality Product with Affordable Price Reduced Energy Consumption �¢?? Minimum Cost Low Costs For Infrastructure and Installation Easy Using Automation Program In Every Language Electrical Panels Operable at Different Energy Levels Affordable Shipment with Demountable Design Low Maintenance Cost and Easily Available Spare Parts in Every Country The Feature of Easy Disassembly from Current Location and Transportability to Another Area SPECIAL WARRANTY AND SERVICE 2 Year Mechanical Warranty Against Manufacturing Defects Sale of Affordable Spare Parts after the Warranty Period Option to Extend Warranty Period to 5 Years with Price Difference International Validity in Warranty Commitments Real-time Fault Detection with Remote Video Connectivity to the Facility Minimum 10 Years Warehouse Availability Guarantee for Each Part 48-Hour Response Time To Domestic Facilities In Case Of Service Required Malfunctions Maximum 72 To 120-Hour Response Time To Facilities Abroad CRUSHING SCREENING PLANTS MANUFACTURED BY US CRUSHING SCREENING PLANT WITH CONE CRUSHER CRUSHING SCREENING PLANT WITH VERTICAL SHAFT CRUSHER CRUSHING SCREENING PLANT WITH HAMMER CRUSHER CRUSHING SCREENING PLANT WITH JAW CRUSHER CRUSHING SCREENING PLANT WITH TERTIARY CRUSHER The infrastructure project required for the crushing and screening plants of your preferred capacity to be established on the site will be provided for free by our company. To watch promotional videos and obtain more detailed information, please visit our website.
120 m3 CAPACITY - MOUNTAIN MATERIAL - CRUSHING AND SCREENING PLANT (CRUSHER) FOR SALE FROM THE MANUFACTURER YOU DON'T NEED TO LOOK FOR A SECONDHAND CRUSHING - SCREENING - WASHING PLANT TO BE ECONOMICAL, DON'T MESS WITH SOMEONE ELSE'S SCRAP... WE OFFER YOU THE OPPORTUNITY TO PURCHASE HIGH QUALITY, LONG-LASTING, CRUSHING-SCREENING-WASHING PLANTS AT AFFORDABLE PRICES. WE ARE AVAILABLE 24/7 WITH OUR ENTIRE TEAM TO OFFER THE HIGHEST QUALITY PRODUCTS AND SOLUTIONS TO OUR CUSTOMERS IN 5 CONTINENTS AND 52 DIFFERENT COUNTRIES. MOREOVER, WE GIVE A 2-YEAR UNCONDITIONAL WARRANTY AGAINST MANUFACTURING DEFECTS TO ALL OUR PRODUCTS BY RELYING ON OUR MANUFACTURING QUALITY. THE PRICE WRITTEN IN THE ADVERTISEMENT IS REPRESENTATIONAL. YOU CAN CONTACT OUR SALES REPRESENTATIVE TO GET A SPECIAL PRICE OFFER ACCORDING TO YOUR NEEDS. THE MAIN REASONS TO CHOOSE OUR COMPANY WHY MEGA EXPORT & IMPORT Easy communication in preferred language On-time production - delivery and assembly Secure trade with fixed price guarantee 24/7 online support with experienced staff for exports Online monitoring of the production process Online tracking of the shipment process Free infrastructure preparation project and test production Easy trade with leasing and letter of credit WHY MEGA CRUSHING - SCREENING - WASHING PLANTS Quality product - affordable price Low energy consumption - minimum cost Low infrastructure and installation costs Easy to use automation program in any language Electric panels that can operate in different energies Economic shipment with disassembled design Low maintenance cost and spare parts readily available in every country Ability to be easily dismantled and moved to another area SPECIAL WARRANTY AND SERVICE Unconditional 2-year mechanical warranty against manufacturing defects Economical spare parts sales at the end of the warranty period Possibility to extend the warranty period to 5 years with a price difference International validity of warranty commitments Instant fault detection with remote connection to the facility Minimum 10-year warehouse stock availability guarantee for each part In case of malfunctions requiring service, 48 hours intervention to our domestic facilities and maximum 72 to 120 hours intervention to our facilities abroad. CRUSHERS AND PLANTS WE PRODUCE CRUSHING PLANTS WITH CONE CRUSHER CRUSHING PLANTS WITH VERTICAL SHAFT CRUSHER CRUSHING PLANTS WITH HAMMER CRUSHER CRUSHING PLANTS WITH JAW CRUSHER CRUSHING PLANTS WITH TERTIARY CRUSHER For the Crushing and Screening Plants in the capacity you prefer, the Infrastructure Project that needs to be built in the area where it be established is given free of charge by our company. Please visit our website to watch promotional videos and get more detailed information.
oilfield christmas tree and wellhead components The oilfield christmas tree is an assembly of valves and accessories, used for fluid control of oil and gas wells, and provides access to the production tubing string. It includes all the equipment on the upper flange of the tubing head. The oilfield christmas tree assembly can be used in many different combinations to meet the needs of any special purpose. According to different functions, the oilfield christmas tree is divided into special wellhead devices for oil production (self-injection, artificial lift), gas production (natural gas and various acid gases), water injection, thermal production, fracturing, acidification, etc. And form series according to different pressure levels. oilfield christmas tree and wellhead components are mainly used for gas production and gas injection. Because the relative density of natural gas is low, the pressure of gas injection is low, regardless of whether the gas production or gas injection wellhead pressure is high, the flow rate is high, and it is easy to leak. Sometimes there are corrosive media such as H2S and CO2 in the natural gas, which is harmful to the tree. Tightness and its material must have stricter requirements. Sometimes for safety, double valves are used for oil and casing. For some high-pressure and ultra-high-pressure gas wells, the valves are integrally forged with high-quality steel. The main pressure-bearing parts of the companys Christmas tree and tubing head cross are made of forgings or specially smelted castings, so they have the characteristics of high pressure bearing, safety and reliability. Function 1. It is the base of the oilfield christmas tree. Hanging and fixing the oil pipe hanger. 3. Pack the casing annular space. 4. It is the casing operation window. 5. Provide a control channel for the downhole safety valve and a penetration channel for the electric pump cable. 10 wellhead components casing head The casing head is a kind of part connecting casings and wellheads. It provides a transition joint for the tubing head.Christmas tree and other wellheads. Both top and bottom connections are API 6A flanged, and the flanges are provided with locking bolts. Casing Heads have a straight bore bowl with 45 C landing shoulder design which avoids damage to sealing areas by drilling tools and prevents test plug and bowl protector wedging problems when pressure is applied. Casing Heads are normally furnished with threaded outlets and studded outlets are available upon request. Bottom connections can be furnished threaded or slip-on for welding.
Centrifugal Air Blower Centrifugal Air Blower For Sale Centrifugal air blowers adopt three core high-end technologies: "ultra high-speed direct connection motor", "air suspension bearing", and "high-precision single-stage centrifugal impeller", creating a new era of high efficiency, high performance, low noise, and low energy consumption fans. It is a new generation of high-tech civilian products developed with great dedication based on the design experience of aviation turbomachinery. Features 1. Energy saving and high efficiency The air suspension centrifugal blower uses air bearings, direct connection technology, a high-efficiency impeller, a permanent magnet brushless DC motor, and no additional friction. The fan automatically adjusts the consumption of motor power based on the output (adjustable range of air volume 40-100%) to maintain the high efficiency of equipment operation. 2. No vibration, low noise Adopting air bearings and direct connection technology, there is no vibration generated, and the fan does not need to be equipped with sound insulation devices; The equipment is lightweight and does not require a special foundation. The installation and layout are simple and flexible. 3. No lubricating oil The fan adopts air-bearing technology, and the system does not require a lubricating oil system, providing clean air to special industries such as electronics, medicine, and food. The operating temperature of the air bearing has reached 600 degrees, and all the drawbacks of the oil-based bearing system have been successfully resolved. 4. No maintenance Without the necessary gearbox and oil bearings for traditional fans, our series of high-tech impellers and motors are directly connected without couplings. The intelligent control system and key components use AL7075 (aviation aluminum). These technologies ensure that the equipment is maintenance-free, reduce maintenance costs for users, and improve the stability of the gas supply system operation. 5. Convenient operation control Self-checking and constant pressure operation, load/no load operation, overload control, and unmanned operation can be achieved on a personal computer for fan speed, pressure, temperature, flow rate, etc. The fan adjusts the flow rate by adjusting the speed of the impeller. Adjusting the speed can easily adjust the flow rate based on the temperature and pressure changes of the inhaled air. It can automatically and manually adjust the flow rate. 6. Small device installation space The air suspension centrifugal blower equipment is lightweight, small in size, easy to install, and can significantly save users on building and auxiliary electrical control system investment.
Engaging in electronic speed controller for automotive fuel & water pumps, electrical tools for 13 years, we are one of the few manufacturers that focus on electronic speed controller only. We dedicate to designing reliable and powerful electronic speed controller for Hobby products such as RC cars, boats, planes in addition to manufacturing controllers for automotive fuel pump & water pumps, electric tools and drones. Besides the potent E3-the one which was designed for ultimate experience of a 1:8th even 1:6th RC cars, we designed several mild ones. Here I introduce E10 electronic speed controller to you. Even E10 is the mildest one in this product family, with power of 2-4S Li-Po batteries, 140A continuous current, it will generate fierce power. Like the super car, the launch control start will get you excited. There are 12 grade acceleration from 1% to 12%, you can adjust it according to your habit. This electronic speed controller is applicable to both sensored or sensorless brushless motor, we provide bespoke service. What we do is help you achieve your ideas. It supports max motor speed of 240,000RPM. In another word, you must ensure that the motor speed does not exceed 240,000RPM to avoid any damage to both ESC and motor. BEC output is optional, 6.0V or 7.4V, the current is 5A continuous and 10A peak. Which is much more proper? Itâ??s up to your servo specification. An excellent thermal management is essential to a powerful electronic system. With the integration of fan and forged Al heatsink, E10 electronic speed controller maximizes airflow throughout the system, cooling critical component for high-performance and longer runtime. The fan is controlled by ESC according to internal temperature. All configuration can be done on mobile app via Bluetooth, running mode, acceleration, braking force, turbo timing, initial PWM etc. It is ideal for training, you can familiarize function and features step by step. We have designed a series of protection measures including low voltage, over voltage, over temperature, throttle loss, abnormal braking, short circuit protection and so on. You donâ??t need to worry about quality and reliability. You just feel drivability, handling and enjoy the racing, we take care of the rest. Our products have been verified in automotive industries and drones, adopting by clients such as NISSAN, Xpeng, Feilong Auto Component (FLACC), Shenhai Electrical Appliance, Wuhan Cummins, FAW Group, Jingyi Group, Linrui Auto Electrical Appliance, Unicent, and more. Parts are certified by CSIPER25, ISO11452-2, ISO10605, ISO16750, ISO7637. Contact us for detail. If you have any special concept or requirement, we will help you achieve your ideas.
A full range of push type fastener kits, available in 12 popular sizes, suitable for replacing door decorations, radiator guard yokes, mudguards, bumpers, and mudguard fasteners in models such as Ford, General Motors, Chrysler, Toyota, and Honda. Save time and money - you can find all kinds of car push fastener kits here, without having to go to a car parts store to find different fasteners. You can use the free fastener remover to remove old clips. High quality - Made of high-quality materials, heavy-duty structure, and durable, this push type fastener will not easily break or crack during use. The most common size - don't worry about losing or damaging body fasteners. All necessary retainers for accurate replacement of old and damaged retainers. � Specifications Technical Details Manufacturer:HanYang Part Number:HY-RIV002 Size:R2040~R6060 Color:White/black Packing & Delivery:Tray+Carton Company Profile: Our company is a professional manufacturer of Fasteners, Hardware products, Hardware Tools, Metal Products, Machinery and equipment. Since its inception, the company has been constantly innovating and breaking through, with stable product quality, continuous improvement of technology, and improvement of production efficiency to enhance the core competitiveness of the company. High-end technical talents have continuously developed a series of new production processes to make their technologies more mature and stable. The success and brilliance of an enterprise depends on the recognition, support and trust of our customers. Our company will continue to innovate, forge ahead, and follow the pace of the market, and continue to design and manufacture more high-quality and practical products for new and old customers. FAQ: 1. who are we? We are based in Yunnan, China, start from 2022,sell to Oceania(12.00%),Southeast Asia(12.00%),South America(12.00%),Southern Europe(12.00%),Eastern Asia(12.00%),North America(12.00%),Africa(5.00%),Northern Europe(5.00%),Western Europe(5.00%),Domestic Market(5.00%),Eastern Europe(3.00%),Central America(2.00%),Mid East(2.00%),South Asia(1.00%). There are total about 11-50 people in our office. 2. how can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment; 3.what can you buy from us? Fasteners,Hardware products,Hardware Tools,Metal Products,Machinery and equipment 4. why should you buy from us not from other suppliers? Since its inception, the company has been constantly innovating and breaking through, with stable product quality, continuous improvement of technology, and improvement of production efficiency to enhance the core competitiveness of the company. 5. what services can we provide? Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery; Accepted Payment Currency:USD,CNY; Accepted Payment Type: T/T; Language Spoken:English,Chinese
Perkins Diesel Engine, Diesel Generator set 50HZ/1500RPM, 380/220V, 400/230V, 415/240V can be adjustable, Open Type, weatherproof type or soundproof type, trailer type and so on. Also have 60HZ/1800RPM, voltage is 220/127V, 380/220V, 440/254V can be option There are Perkins from China, UK, USA and india, all depend on the required model. ATS can be option Controller brand: UK Deepsea, Czech ComAp, Denmark DEIF, Smartgen China Generator Standard Compose: Meet the environmental temperature 40 water tank radiator, Driving belt cooling fans, with fan safety shield 24 V charging generators Generator: Single bearing generator, IP23 Grading Protection, H Insulation degree Shock absorber Dry air filter, Fuel filter, Oil filter Power output circuit breaker Standard control panel 12 V battery and battery connection cables Battery Charger Exhaust pipe, Bellows, Flange, Muffler set 8 hours base tank Documents and Manuals Generator set Genset Model AP1100 Rating Power (KW/KVA) 800/1000 Standby Power(KW/KVA) 880/1100 Rating Ammeter(A) 1519 Diesel Engine Engine Model 4008TAG2 Prime Power(KW) 899 Standby Power(KW) 985 Bore X Stroke (mm) 160X190 Number of Cylinder & Configuration 8 in line Displacement (l) 30.6 Compression Ratio 13.6:1 Aspiration Turbocharged & After-cooled Max. intake depression(kPa) 6 Combustion air Volume(m³/min) 70 Max. Exhaust back Pressure(kPa) 10 Exhaust Gas Flow(m³/min) 201 Max. Exhaust Gas Temperature() 485 Cooling Water cooled with Radiator Fan cooling air flow(m³/min) 1074 Total Coolant capacity(l) 188 Max. temperature of coolant() 93 Max. permissible oil temp.() 105 Total oil capacity(l) 166 Rating Fuel Consumption(l/h) 215 Governing Type Electrics Governor Alternator Rating Voltage(V) 380/220 (adjustment) Alternator Model TAL-A49-E Rating Capacity(KW/KVA) 800/1000 Eff.% 94.2% Power Factor 0.8 lagged Exciting type Brushless PMG exciter, AVR Voltage regulation ±0.5% No. of Phase 3 phase 4 wire Enclosure Class IP23 Class of Insulation H Battery Rating Capacity(AH) 4X150AH 12V Generator set dimension (LXWXH) 5300X1870X2500 mm Weight (kg) 7900 FAQ Q: Do you offer OEM service? A: Yes Q: What is your payment term? A: 30% T/T in advance, 70% balance when receiving B/L copy, Or 100% irrevocable L/C at sight. Q: What is your lead time? A: About 15-25 days after receiving advance deposit or original L/C. Q: What certificates do you have? A: We have ISO And we can apply for specific certificates for different countries such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc. Q: What warranty do you provide? A: One year or 1200hours running whichever occurs first, during the guarantee period, we will supply free of the easily damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for Genset maintenance.
CALIFORNIA AIR TOOLS 15020CR ULTRA QUIET & OIL-FREE 2-HP 15-GALLON STEEL TANK AIR COMPRESSOR Price:$730.55 SKU:CAT-15020CR Brand:california air tools Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features Quiet, Oil-Free and Powerful Continuous Series 110V Air Compressor Designed to be one of the quietest 2-HP in the industry Less service and maintenance along with at least 30% less noise Handles up to 8 hours of continuous running at 90 PSI & 12 hours at 40 PSI or below Dual Head Single Piston Pump w/ Teflon Coated Piston Rings Engineered for high performance and durability Can handle a variety of temperatures along w/ cold starts Single axis ceramic coated aluminum cylinders reduce wear & noise 3000+ hour life cycle before wear; comparable units are 500 hours or less Reliable 2-HP Ultra Quiet Motor Large cooling fan allows for a cooler operation Operates at 1680 RPM creating less noise and less wear Increases duty cycle and allows for longer run times Rated at 67 decibels; about the same as a normal conversation 15-Gallon Steel Air Tank Just the right size for shop, warehouse or factory Time to fill tank from empty to full â?? 150 Seconds Recovery time from 90 PSI to 120 PSI - 40 seconds 5 Micron Air Filter & Regulator Removes dirt, dust, and moisture for better tool operation Perfect for all types of continuous tools; spray guns & sanders Regulator maintains constant outlet pressure for tools; 1/4â?? quick connect Thermal Overload Protector Protects the motor from overheating Low amp draw at only 19.5 amps (30 amp breaker required) Creates less heat which dissipates more efficiently to prevent overloading Condor Pressure Switch Regulates air pressure in the compressor Large easy-to-read double pressure control gauges Great for a wide range of garage & workshop projects Specifications Engine HP 2 Motor Voltage 110 Volt AC Phase 1-Phase Magnetic Starter No Amp Draw 19.5 Recommended Breaker 30 Amp Breaker dBA 67 Pump CFM 4.90 CFM Rated @ 90 PSI CFM @ 40 PSI 5.80 Pump Material Aluminum Pump Type Single-Stage Max PSI 120 PSI After Cooler No Pump Drive Direct Drive Oil Type Oil Free Tank Tank Size 15 Gallons Tank Outlet 1/4 Inch Electronic Drain Valve No Tank Orientation Vertical Accessories Pressure Gauge Yes Air Dryer No Air Filter Yes Overview Weight 119 Pounds Product Length 22 Inches Product Width 22 Inches Product Height 40 Inches
We have range of different orthopedic and surgical disposiable items. Avaiable in different sizes and in any quantity which buyer requires.
It is designed for driving solar panel piles.
pitched roof/flat roof/tiled rooftop/tin rooftop/tiled rooftop Stainless steel/Al 6005-T5/AL 6063/AL available
Glass To Glass Edge Connector Product Specifications: Insulation material:PA/CU;Rated voltage:1000V&1500VDC; Rated Impulse voltage:16KV;Test voltage:8kV(50Hz,1min); Contact resistance:�¢?�¤ 0.25 m ;Contact material:Copper,Tin plated; Degree of protection:IP68(In potting);Overvoltage category/Pollution degree:CATIII/2; Safety degree:II;Flame class:UL94-V0;Installation type:Outdoor,UV resistant(F1); Ambient temperature range:-40 85 (IEC);Suitable cable cross sections:2.5 4mm2/14~12AWG;Connecting system:Soldering; Upper limiting temperature:110 (IEC);Reference standard:TUV/CE(IEC62852:2014).
1500VDC PV 4.0 Fuse Connector Fix Base Product Specifications: Body material:PC/PA/PBT;Suitable connector part no.:4F0-15,4F1-15,4F2-15 and 4F3-15; Flame class:UL94-V0;Ambient temperature range:-40 85 (IEC); Cable tie size(Max.):13(W) 2.5(T) mm;Fix screw size:M4 L(As required).
NSPV2258H Technical Specification: Rated Voltage:DC 1500V;Rated Current:Max.100A; Class of Operation:gPV;Standard:IEC60269/IEC60947; Wire:1.5-25mm ;Torque:2.5Nm. Price for reference only.
PV-NEHP01 Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:30A(With diode); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP68(in potting);Safety degree:II; Flame Class:UL94-V0;Ambient temperature range:-40 85 (IEC); Suitable cable cross sections:6mm2 (10AWG);Diode Number:Each 1PC; Upper limiting temperature:110 (IEC);Range of cable gland(mm):O.D.:6.0; Ribbons size(mm):Max.8(W) 0.2-0.5(T);Connection of bus ribbons:Soldering.
Product Specifications: Insulation material:PPE; Safety degree:II; Rated current:Input:20A,Output:60A(With 10mm2 cable); Flame class:UL94-V0; Rated voltage:1500VDC; Ambient temperature range:-40 85(IEC); Test voltage:8kV(50Hz,Imin); Suitable cable cross sections:2.5 10mm2 /14 8AWG; Contact resistance:
4in1 Piercing connector(IPC4116120) Product Specification: Insulation material:PA+CU; Safety degree:II; Rated voltage:1500VDC/1000VAC; Flame class:UL94-V0; Suitable cable cross sections:Tap:2.5~16mm2 (OD Max.9.0) / Main:10-120mm2 (Al/CU); Installation type:Outdoor,UV resistant(F1); Contact resistance: 5 m; Ambient temperature range:-40+85 Contact material:Copper,Tin plated; Connecting system:Lock connection; Degree of protection:IP67; Nut cap locking force:12Nm; Overvoltage category/Pollution degree:CATIII/2; Upper limiting temperature:110 (IEC).