Insulation Piercing Connector Ipc Connector

This type insulation piercing connectors are suitable for all types of LV-ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of insulation is avoided. Suitable for aluminum and copper conductors and components not losable, end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. insulation piercing connector

Fire-retardant Insulation Piercing Connectors Factory Direct Sales Plastic Fire-Retardant Insulation Piercing Connectors for ABC Cable Electric Fire Retardant Insulation Piercing Connector Insulated Clamp Electric Fire-Retardant Insulated Piercing Connector for ABC Cable Fire-retardant Insulation Piercing Connectors(CONWELL Type) Selection table Please phone us for special specification and type. General of insulation piercing connector(IPC) 1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali For Sale Piercing Connector, Metal Anchor Clamp, Insulation Piercing Connectors, Eye Bolt, Guy Attachment, Plastic Anchor Clamp etc. -

Keeps good conduction without any damage resistant to effusion can resistant to 4KV 1 min in water 1 Has piercing structure, need not strip the connector over 2 Takes small installation space,easily installed 3 suitable for bridge,overhead line and underground 4 Can used in between below 50 degrees and 150 degrees Materials Body: Nylon 66 Teeth/blade : copper tinned Bolt: Hot dip galvanized Sheer head : Zinc alloy Parameters KTEP:main:16-95mm2/1.5-10mm2 Packing:300pcs/CTN

Ipc series insulation piercing connectors Piercing connector, simple installation, need not strip the cable coat. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. Adopted special connecting table, apply to joint of cu(al) and cu(al) or cu and al. Small electric connecting resistance, impulse current can be up to 15ka. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kv. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (1.5-240mm2) Packaging by cartons