SPECIFICATION Origin: Viet Nam Variety: Caulerpa Lentillifera Characteristics: bunches of long grape seaweed, big fruit, shiny, green Type: salted (10%, 22%) Shelf life: Flavored Packaging: Vacuum Pack Shelf Life: 6 months Temperature: 5-10 degree Size: >5cm after soaking water Ratio: 1:3 (1kg sea grape salted = 3kgs after soaking)
Packing: In Can 720 Ml And 1500 Ml Net Weight Ingerdients: Gherkins/ Cucumber, Carrot, Garlic, Dill, Sugar, Salts, Acid Acetic, Water Size Of Gherkins: 3-6 Cm, 4-7 Cm, 6-9 Cm Shelf Life: 2 Years
Packing: in Can 720 Ml and 1500 Ml Net Weight Ingerdients: Gherkins/ Cucumber, Carrot, Garlic, Dill, Sugar, Salts, Acid Acetic, Water Size of Gherkins: 3-6 Cm, 4-7 Cm, 6-9 Cm Shelf Life: 2 Years
PICKLED CUCUMBER IN JAR Origin: Vietnam Preservation Process: Vegetable Oil Ingredients: Cucumber, water, spice, salt Glass bottle: 380ml, 540ml, 720ml, 900ml Cover: Blue, Red or cap in Logo Size of cucumber: 1-4cm; 2-5cm; 3-6cm; 6-9cm Acid: 0.35 - 0.55 % (acetic acid) Salt: 2.4 - 2.6 % (NaCl) Brix: 5.0 - 6.0 % Spices: celery, carrots, sugar, pepper, garlic | or Customer's formula Shelf life: 3 years Certification: ISO, HACCP Packing: In jar of 720ml/1500ml, or in drum of 220 liters.
Type: Cucumber. Preserved type: vinegar, brine. Acid: 0.35-0.55% (acetic acid). Salt: 2.4-2.6% (NaCl). Brix: 5.0-6.0%. Size (cm): 1-4; 2-5; 3-6; 6-9. Spices: celery, carrots, sugar, pepper, garlic or customer's formula. Packing: in jar of 720ml/1500ml, or in drum of 220 liters.
We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
GraThick is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch to enhance its thickening and stabilizing properties. It is used as functional food ingredient to improve the consistency of RTC gravies and gravy bases. As Thickener: GraThick is primarily used as thickener for RTC Gravies and gravy bases. It improves the consistency of gravies without hindering taste and flavour components. The starch granules in GraThick absorb liquid when added to the product. The granules starts swelling when heated, and then burst, releasing starch into liquid. The granules swell up to 30 times their original size resulting in increased thickness and consistency of the product. As Stabilizer: RTC (Ready â??To- Cook) gravies and gravy bases usually undergo retort packaging to increase the shelf life. GraThick helps to maintain the stability of the product while retort packaging. RTC gravies will be reconstituted with water before using. GraThick maintains the consistency and thickness of the product while reconstitution also. ï?· GraThick can be used in the preparation of all types of RTC Veg and Non- veg gravies ï?· It can also be used in gravy â?? bases of all cuisines(Traditional and International) ï?· It can also be used in RTU Gravy masalas DOSAGE Use 1 to 3% GraThickTM of total batch size. For excellent results, maybe use upto 5% GraThickTM of total batch size.
Caustic Soda Flakes Caustic Soda Pearls / Bead / Prill / Granule Caustic Soda solid Molecular formula: NaOH Molecule Weight: 40 H.S code: 28151100 CAS: 1310-73-2 UN number 1823 Dangerous Class 8 We use rich natural gas resources and its strategic of liquid alkali procurement, storage, transport conditions, gradually formed transportation and sale of liquid alkali, production and sales base Specifications(Caustic Soda Pearls 99%min): 1. Item: STANDARD 2. NaOH: 99% 3. Na2CO3:0.5%max 4. NaCL:0.03%max 5. Fe2O3: 0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Flakes 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.5%max 4. NaCL:0.05%max 5. Fe2O3:0.005%max Packing in 25KG net PP bag lined with double PE inner bags. Specifications(Caustic Soda Solid 99%min) 1. Item: Standard 2. NaOH: 99%min 3. Na2CO3: 0.9%max 4. NaCL:0.15%max 5. Fe2O3: 0.01%max Packing in 200KG net sheet metal drugs.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
It is a cost effective product for melting of snow and ice on roadways, highways, parking lots and bridges; rock salt is a reliable recommendation for winter road deicing. Details of Raw Salt Product Type  Salt Processing Type  Raw Natural Appearance  White amp Off White Shelf Life 2 Years Place of Origin  Gujarat Foam Granules Packaging  PP Bag Jumbo amp Pallet Purity  97 Weight  25 50 1000 KG Brand Name  Customs Particle Size  2 to 8mm
Specifications: 1. HDPE 2. Transparent granule 3. We have all grades - Injection, Film and Moulding, all Density and Melt Flow Rate.
Specifications:- 1. LLDPE 2. Transparent granule 3. We have all grades - Injection, Film and Moulding, all Density and Melt Flow Rate.
Being a quality-centric organization in the particular domain, we are leading in presenting high-grade quality range of Raw Salt that is formulated for using for industrial purpose. We offer the presented salt at budget friendly rates. Product Details: Free from impurities Rich in taste Long shelf life Hygienically
About THE Product : Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement). Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications. Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties. Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste. Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water. Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium. GBFS : (Granulated Blast Furnace Slag) Source : Granulated BF Slag From Gujarat State, India Supply Quantity : 50,000 Metric Tons Per Month Packing: Bulk Parameters (% BY MASS) CaO 30-38 Al2O3 15-20 SiO2 30-40 Glass Content 85-97 MgO 8-11 Fe2O3 0.5-1.5 Moisture 10 MAX Size -5mm Min 95, +5 mm Max 5 Relative Gravity 2.9 Bulk Density(Bagged) 1200 KG/M3
New Designed High Capacity Vegetable Cutter Machine ,cutting shape :Square strip 2.4x2.4mm , V-strip 3.2x3.2mm , flat slice /wave slice 1-5mm, can adjustable. High Capacity 3.5T/hour ,Power : 1.5kw, Voltage: 400V ,3-phase /50HZ. Application scenarios restaurants, canteens, fruit and vegetable processing factories, supermarkets Potato slicer /strip /machine ,carrot slicer/strip machine ,also cutting other kind vegetable . Good price small place easy working ! Can connect production line .
PET Kiriko crushed material, A type White, no caps, no labels From PET flake related crushing Kiriko pulverized material from the original material : PET bottle flakes (A grade).This is not a powder. Size, 3-5mm Moisture content, around 15% 25-50tons month
White Himalayan Salt is thought to be the rarest of Himalayan salts and is freest of impurities while still containing all the benefits of the pink variety. It contains 84 minerals including calcium, potassium and iron.
Pure Himalayan Pink Salt from the famous Salt Range Pakistan. All organic and 100% compliant products, Desired Packing available with custom label and our own label as well. Along with that we deal in lick salt, salt lamps, salt tiles and other salt products.
2-head packaging machine (also can 4-18head according different capacity choice) Packaging speed 15bags/min Bag length 90-320mm Bag width 80-210mm Overall weight 400kg Power 1.8kw/220v Packaging capacity 20-1000ml Outer packaging size 820 x1220 x 2500mm Packaging form Back sealing This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc. Performance characteristics: 1. High precision digital sensors enable precise measurement to be achieved instantly. 2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use. 3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging. 4. Four scales work alternately, with fast packaging speed. 5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean. Host configuration: This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
