Bolted Steel Leachate Storage Tanks Introduction Bolted Steel Leachate Storage Tanks are designed to store leachate, which is the water is being extracted from the site. Leachate is highly corrosive depending on the variability of the composition, and need tanks and containers with excellent corrosion resistance to store it. When the composition and toxicity of leachate vary from one landfill to another landfill, one can not be too careful when storing such a volatile substance. If not properly supervised or contained, leachate can seep through the water table and into the groundwater. There are only a few tanks that have abilities to store landfill leachate, which with the variability in composition. When a project comes with leachate storage tanks, the landfill operators first option is Center Enamels glass fused to steel leachate storage tanks. Center Enamel Co., Ltd is a manufacturer dedicated to enameled products since 1989. We have more than 30 years of experience in Glass-Fused-to-Steel leachate storage tanks design, manufacture, and installation. We are the largest and the most professional glass-fused - to -steel bolted tank supplier in China. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition. Our company has the most advanced production line and already passed the ISO9001 - 2008 quality system certificate. Center Enamel Tanks are produced and designed confirming to AWWA D103 - 09, OSHA and can meet European standards. The center Enamel is a unique enterprise that can produce an AA grade enamel sheet now. The company owns a professional R&D department with more than 30 person laboratory, and possess independent enamel formula research ability. According to customers' different operating requirements, we can customize various products.
In order to prevent the damage of sludge to the environment, we need to use the sludge storage tank for sludge storage and treatment. Sludge mainly comes from sewage treatment, high organic content, perishable, smelly. Sludge including activated sludge, humus sludge, concentrated sludge, are corrosive. Glass fused to steel tank is the best choice for sludge storage. It combines the strength of steel with the excellent chemical and physical corrosion resistance of glass, with a service life of over 30 years and low maintenance requirement. Center Enamel is a well established, world-leading storage tanks manufacturer in China. What is a glass fused steel tank? Glass fused to steel tanks are assembled from glass plates and secured with self-locking bolts. Then apply sealant to the joint clearance and bolt position to improve the air tightness of the tank. Easy to install, no large installation equipment and/or highly skilled workers are required, and can also be dismantled, moved and relocated. Center Enamel was founded in 1989, with 30 years of experience in the production of enamel products, it is not only the first manufacturer to produce glass fused steel cans in China, but also the most professional manufacturer of GFS cans in Asia. Our glass fuse to steel cans have been exported to the United States, Australia, Canada, Malaysia, Indonesia, Russia, united Arab emirates, panama, India, South Africa and more than 60 countries.
Sludge Holding Glass Fused Steel Tank In Green Energy Industrial Sludge Holding Tanks provide storage and blending for the thickened waste activated sludge, primary sludge, imported sludge, and scum before further Processing. Bio-reactors provide an environment in which living organisms, including bacteria and plankton (termed activated sludge), remove pollutants from the wastewater by feeding upon the organic matter and by absorption. Glass fused steel can be used as a sludge storage tank in such applications. Other than that, the glass fused steel tank can be used as any kind of storage tank or reactor. About Us Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture, etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa, etc. The superior product quality and prompt service gain us worldwide recognition.
A fire-protection water storage tank can make all the difference when a fire breaks out. Water is the most common extinguishing agent for combating fires. Water is so fundamental to firefighting that a good water supply is one of the most important factors in municipal fire protection. Fire protection water storage tanks are not just for residential properties and have been developed to the point where they are now a common sight at many commercial and industrial construction sites, including airfields, airports, schools, universities, hospitals, prisons, police stations, office buildings, data centers, and other facilities that need a reliable or redundant water supply. Having these tanks on commercial properties takes away the worry of having a shortage of water should a fire occur. In many cases, fire protection water storage tanks provide the water necessary for fire suppression purposes inside the building. Center Enamel offers fire protection water storage tanks from 20 to 18000 steres. All of our fire water tanks are certified by NSF61. This standard provides requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection. Center Enamel is a China manufacturing company located in Shijiazhuang, Hebei province. Our product categories range from fire water tanks, Glass-Fused-to-Steel tank, wastewater tank, biogas tank, anaerobic digesters, dry bulk storage tanks, and other storage solutions. Benefits of Center Enamel Fire Water Storage Tank? Short construction period, cost-effective tank solution Superior corrosion resistance, service life is more than 30 years Easy to install, no need for big installation equipment and/or very skilled labors Tank volume can be easily expanded It can be dismantled, removed and relocated Elegant appearance, tank color can be customized
Biogas storage tank is also called biogas holder and is a kind of Anaerobic digestion tanks which are often cone shaped and supported at the centre with a single pole. The outer layer of membrane roof works as the protection for the inner membrane . The outer membrane is more strong and coated with UV resistance coating . Outer membrane can be against static electricity, ultraviolet radiation and aging. Inner coat can be against biogas leakage. Why use Glass-Fused-To-Steel Tank for biogas storage tank ? 1. Advanced technology and innovative edge protection ensure Center Enamel Glass-Fused-to-Steel Tanks are the exceptional solution in most harshest storage environment. 2. Center Enamel Glass-Fused-to-Steel tanks with superior corrosion resistance can be utilized in both the liquid and gaseous zone, and maximizing the service life of tank structure. 3. Customized colors make the tank harmonized with the surrounding environment. 4. Long service life glass coating requiring minimal maintenance, reducing the risk & loss of project shutdown during operation. 5. Modular bolted constructure give shorter installation period with simple installation tools. 6. Tank can be dismantled and rebuilt, gives continuous asset value to the product. Except for biogas storage tank , Center Enamel Glass-Fused-to-Steel tanks can also be used as various anaerobic digester , various aerobic reactor , such as SBR , CSTR , USR , EGSB , UASB , etc
Supply Ability & Additional Information Packaging: Wooden packaging or as requirementsTransportation: Ocean,Land,AirPlace of Origin: ChinaPayment Type: L/C,T/T,OthersIncoterm: FOB,CFR,CIF,EXW Packaging & Delivery Selling Units: Set/Sets Package Type: Wooden packaging or as requirements 50CBM 0.8Mpa low temperature LNG Storage Tankï¼? 1. Effective Volume: 50.0 m3 2. Working pressure: 0.8 MPa 3. Overall dimension: 3016*12120mm 4. Shell material: Outer jacket: Q245-R; Inner: S30408. 5. Insulation: Vacuum powder insulation 6. Tare weight: About 17680KG
Gas Storage Tank (also called compressed air storage tank, air tank, Co2 tank, Oxygen tank, Lpg Gas Tank or nitrogen tank, etc al) is widely used to store and transport gas which keep the stored gas in stable pressure. According to the different ability of bearing pressure, STRENGTH Brand gas storage tank is divided into has high pressure, low pressure and normal pressure storage tank. It can reduce pressure pulsation, the temperature of compressed air, the load on the filter and desiccant. Features of gas storage tank: High plastic toughness, uniform force and reasonable stress distribution. Good corrosion resistance, to eliminate the stress of heat treatment. Finite element analysis of fatigue design. The perfect quality assurance system with advanced manufacturing process bring high quality products. Varieties and different tanks meet customized requirement.
Sectional Plastic Water Tank including three parts: (1) FRP panels ( Bottom panel, wall panel, roof panel and manhole) (2) Internal parts ( Internal ladder, tiepiece, support, tiepiece board, flanges) (3) External parts ( External ladder, angle iron, tie piece board, bolts and nuts, water level indicator) The material of internal and external parts as follows: Stainless steel 304 /316 Hot dip galvanized steel (HDG) Cold dipped galvanized steel (CDG)
1. Grade: SUS304,SUS316 2. Size: Customized 3. Standard: GB5749-85 4.12 months warranty time 5.Packing Details : Packing, wooden case, in nude, or by clients' requirement 6.Delivery Details : 15-30 days after order confirmed
In laboratories and scientific research institutes, experimental samples and cells often need to be stored in a low-temperature environment for a long time. There are many cryogenic containers on the market, and laboratory liquid nitrogen tanks stand out and are entrusted with reuse. This is because the laboratory liquid nitrogen tank has such advantages. It is made of aviation aluminum, which has strong hardness, light weight, long-term durability and no deformation; large-diameter design facilitates sample pickup and placement; large capacity, stable and safe storage of samples; multi-layer insulation Vacuum design effectively reduces the volatilization of liquid nitrogen; it can meet the different needs of different workers. Although, there are ways to use laboratory liquid nitrogen tanks. 1. Before use It should be placed in a well-ventilated room, away from fire sources, electrical equipment, moisture-proof, and shaded; Avoid storing in places where the temperature is too high or too low, and the humidity is too high or too low; Check the sealing of the liquid nitrogen tank to see if there is air leakage. If there is any abnormality, contact after-sales service in time; 2. When using Use caution when adding liquid nitrogen. New jars should be filled slowly and pre-cooled to prevent the liner from cooling too quickly and reducing its service life; When filling liquid nitrogen, do not pour liquid nitrogen on the vacuum exhaust port to avoid a decrease in vacuum degree; The neck plug is made of thermal insulation material, which can not only prevent the evaporation of liquid nitrogen, but also play a role in fixing the lifting cylinder; Check frequently. If frost is found on the surface of the tank, stop using it; 3.After use Liquid nitrogen tanks should be placed on a stable and flat ground, away from direct sunlight and high temperature environments; When not in use for a long time, it should be cleaned and stored to prevent sample residue from corroding the tank wall and affecting the service life; It is recommended to place it in a well-ventilated area and regularly check the insulation performance of the tank; In short, the role of liquid nitrogen tanks in the laboratory is irreplaceable, but their correct use is crucial. During the operation, you must not only pay attention to the storage of the liquid nitrogen tank, but also the addition and correct use of liquid nitrogen to ensure the safety of staff and samples.
Frozen embryos are one of the prerequisites for implementation, the other is the cultivation of embryos. After the eggs and sperm are completely extracted, in order to ensure the viability of the eggs and sperm, they will immediately enter the cryopreservation stage, suspend their life activities, and then complete insemination in an external culture system to complete the embryo development. After the embryo is transplanted into the uterus, it still needs to be stored at low temperature. The method of preservation is to put it into a low-temperature medium - liquid nitrogen. Since the temperature of liquid nitrogen is much lower than normal temperature, organisms in direct contact will be frozen. Otherwise, the plastic will be frozen brittle. In order to ensure the vitality of the sperm and egg "combination" embryo, a special liquid nitrogen container is needed to store it. We can also call it an embryo storage tank, because it is used for embryo storage at this time. The embryo storage tank is composed of two layers: an inner and outer bladder. The inner and outer layers are insulated by a vacuum. It has good thermal insulation and can reduce liquid nitrogen consumption. Even so, the liquid nitrogen balance and temperature in the tank need to be tested every day to ensure that the ambient temperature of the cryopreserved embryos is normal and stable. In order to ensure the safety of the embryos and improve work efficiency, we can install a liquid level alarm, which can detect the liquid level in the tank. When the ambient temperature reaches the upper and lower limits, an alarm will sound to remind the staff to replenish liquid nitrogen in time. It also supports text messages. , telephone, and email alarm functions. The addition of a liquid level alarm can avoid embryo loss caused by insufficient liquid nitrogen. This safety measure ensures the safety of the embryonic baby to a certain extent, preventing the embryonic baby from being harmed by the external environment and receiving the same careful care as in the mother's body. It not only improves the success rate of IVF, but also improves the efficiency of laboratory work management. Moreover, using embryo storage tanks to freeze embryos ensures their vitality during the period between the completion of cultivation and delivery to the mother, reducing damage to the embryos due to temperature changes, etc., and ensuring the success rate of IVF.
We are the largest manufacturer of glass fused to steel tank in China since 1989,now we are the only one can produce AA(acid and alkali proof)steel sheet in China. We design our tank strictly according to AWWA,OSHA,EN ISO28765 ect. international standards. We have the most advanced production line,and it pass the ISO 9001:2008 quality system standard. Application: Water storage/treatment Agriculture dry bulk storage Anaerobic digester/ biogas storage Power and energy Sewage treatment Fire water storage Advantages: 1. Color can be customized,with beautiful appearance 2. Not subject to weather and site condition 3. Easy construction,no need any big equipments 4. Over 30 years' service life,maintenance cost is little 5. Can be dismantled and rebuilt 6. With Excellent anti-UV, will not aging. 7. Cost effective
Single wall stainless steel tanks using for a lot purpose including of storage, dosing, mixing liquid product. HOANG TAM is using high quality materials which material imported from European or Asia identify copy of origin (CO) and copy of quality (CQ) also based on your needs including agitators, nozzles, manholes, and everything in between. HOANG TAM utilize only quality production techniques by having highly trained and certified staff working with precision tools and machinery. This ensures that your equipment is made to European standards following ASTM testing methods or following ASME codes.
Hebei Wansheng Environmental Protection Engineering Co.,Ltd. Is located in Zhengding city which is a national famous historic and cultural city with beautiful views,at its south is the capital city of Hebei-Shijizhuang,at its north we have International Airport near us.The transportation is very convenient.Our company mainly undertakes: biogas engineering, large-scale biological natural gas engineering, landfill leachate resource treatment, kitchen waste energy treatment, urban domestic sewage, food wastewater, slaughtering wastewater, dairy wastewater, printing and dyeing wastewater, medical wastewater, chemical wastewater, beer wastewater, paper wastewater, pharmaceutical wastewater, alcohol wastewater and other types of sewage treatment engineering consulting, design, construction, commissioning and environmental protection equipment research and development
Product process: 1. Using the rotational molding process imported from abroad, the whole is formed at one time, with the characteristics of no welding and no leakage. 2. Polyethylene PE imported from South Korea as raw material, tasteless. Product Features: It is integrated molding, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to stain, can easily remove dirt. Collision resistance, impact resistance, good heat and frost resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, anti-ultraviolet, not easy to embrittle, odorless, good acid and alkali resistance, convenient installation and transportation, simple to use, long time to use. Colors can be customized according to customer needs. Scope of application: This product is a road cutting machine water tank, which is widely used in light industry, machinery, public outdoor construction and other industries.
GFS tank is Glass Fused to Steel bolted tanks. We've produced and installed the highest GFS Firewater storage tank in Indonesia for a Cigarette Manufacturer Plant. The dimension is 7.64*34.8m. Please feel free to contact us to provide our best service.
Nirmaan Tanks are one of the leading brands of High quality Water Storage Tanks in India.
Capacity20L Neck diameter50mm Height 610mm Outer diameter365mm canisters number6pcs canister outer diameter38mm Canister total height125mm canister height520mm Empty weight9.5 kg Lockable lid and protection cover Included. (optional) Static holding time 170-210 days straw capacity / single layer 0.25ml1190pcs 0.5ml 642pcs straw capacity / double layer 0.25ml2382pcs 0.5ml 1284pcs ISO/CEApproved Package carton 40*40*69cm gross weight 12kg Main features of the product: Made of high-strength aluminum alloy. High-vacuum multi-layer insulation design, light weight, small amount of liquid nitrogen static daily steaming loss. Optional lock cover to protect the safety of samples stored in the container. Equipped with a protective cover to prevent the collision of the product during use. Provide vacuum quality assurance of not less than five years. Product introduction: Panshi Liquid Nitrogen Tank is a self-developed product of our company. At present, it has the domestic core patent liquid nitrogen tank production technology. The production quality is strictly implemented in .The products all pass the product quality supervision and inspection. Performance test. This product is commonly used for long-term low-temperature storage and transportation of livestock frozen sperm and vaccines, cells, microorganisms, etc. with liquid nitrogen as refrigerant. It is widely used in animal husbandry bureaus, farms, universities, scientific research institutes, medical, national defense, machinery, electronics, Metallurgy, energy and other industries. If you are interested in the liquid nitrogen tank or need to consult, please click on our online customer service.Welcome sending your inquiry.
Galvanized steel silo for grain storage tank Steel sheet, 275g/m2 Bolted type or spiral type Easy to install and maintain, low cost Bulk in container
type : Barrel storage unit Fiberglass tanks are actually fiberglass reinforced plastic (FRP) .Higher corosion resistance, higher strength, lighter, more flexible and cheaper than comparing materials for corrosion service. Also doesnt moss because of its sunlight proof coating.