Inline ndir h4 sensor general harateristis Measurment range 0-4.4 vol.-% (100%ueg) Temperature and pressure ompensated Integrated temperature measurement Rs485 interfae 4-20ma interfae Inline ndir h4 sensor speifiation Measuring gas: h4 Measurement range: 0 - 4.4 vol.-% (0 - 100%ueg) Resolution: 300ppm Auray: < 2% of the measured value Response time: < 10s Heat up time: < 10min Storage temperature: -20 - +85 Operating temperature: -20 - +65 Operating humidity range sensor: 0 - 99% (not ondensated) Operating humidity range eletronis: 0 - 85% (not ondensated) Interfae: rs485 Analogue output: 4 - 20ma Supply voltage: 10 - 36vd Power onsumption: < 2w Long-term stability: < 5% of the measured value per 1 year
INFRARED SENSOR WITH SILICON LENS SMTIR9902SIL Typical Applications * Contactless measurement of surface temperatures * Temperature measurement of moving objects * Remote measurement due to small angle of view * Climate control * Medical instruments Introduction The Smartec infrared sensor type SMTIR9902SIL is a standard Smartec SMTIR9902 sensor equipped with a silicon lens for measuring radiation temperatures within a small angle of view (7.27'). The SMTIR9902SIL contains a NI1000 temperature sensor for measuring the temperature of the sensor itself. The temperature range of this internal sensor is -20 to 100 'C. The sensor is mounted in a modified TO-05 encapsulation.
HTG3535CH Humidity and Temperature Sensor Module with voltage output DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Frequency Output Temperature and Humidity Sensor HTF3226LF DESCRIPTION Based on the rugged HS1101LF humidity sensor, HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a miniature connector for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the moduleâ??s linear frequency output. FEATURES * Full Lead free product * Calibrated within +/-5% @55%RH * Small size and very cost effective * Miniature connector (JST) * 10kOhms +/-3% NTC temperature sensor (1% optional) * The best combination of cost effectiveness and performance * Stable, linear proportional frequency output from 10% to 95%RH * Stable and reproducible characteristics with temperature * High reliability and long term stability Humidity Sensor Specific Features * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Not affected by water immersion * Patented solid polymer structure Temperature Sensor Specific Features * High quality thermistor * Stable * High sensitivity APPLICATIONS * Printers * Home Appliance -
Voltage Output Temperature and Humidity Sensor HTG3515CH DESCRIPTION Based on the rugged HUMIREL humidity sensor, HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTG3515CH is designed for high volume and demanding applications. FEATURES * Voltage Supply: 5 Vdc * Nominal Output @55%RH: 2.401 - 2.559 V * Humidity Average Sensitivity: +26 mV/%RH * Current consumption: 1.2 mA dc * Humidity Measuring Range: 0 - 100 %RH * Humidity Operating Range: 0 - 100%RH * Temperature Operating Range: -40 - 110'C * Suitable for small bulk assembly * Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS * Full interchangeability. Better than +/-3%RH and +/-0.25'C * Humidity calibrated within +/- 3% RH @ 55% RH * Temperature measurement through NTC direct output * Demonstrated reliability and long term stability * Reliability not affected by repeated condensations APPLICATIONS * Automotive * Home Appliance * Printers -
Temperature and Relative Humidity Sensor Module Description: Based on the rugged HS1101LF humidity sensor, HTF3000LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. It features a very small size for easy, cost-effective mechanical mounting. Direct interface with a micro-controller is made possible with the module's linear frequency output. Features: * Small size product * Compliant with RoHS recommendations and most of Lead Free Soldering Process * Humidity calibrated within ±3% @55%RH at 5Vdc * Stable, proportional frequency output from 0 to 100% RH * High quality thermistor * One of the smallest humidity/temperature modules on the market * High reliability and long term stability * Not affected by water immersion * Stable characteristics with temperature * Part could be washed with distilled water Humidity Sensor Specific Features: * Instantaneous de-saturation after long periods in saturation phase * Fast response time * High resistance to chemicals * Patented solid polymer structure Temperature Sensor Specific Features: * 10kΩ ±1% NTC temperature sensor * Stable * High sensitivity APPLICATIONS: * Printers * HVAC controller -
TSEV01CL55 Thermopile Sensor Module Description TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation. TSEV01CL55 is equipped with an infrared sensor (Thermopile) in front. The Thermopile Sensor has to be pointed at the target object of interest. The basic working principle is: Detection of infrared radiation with a Thermopile sensor, which turns incoming radiation to an analogue voltage Determination of sensor temperature using a thermistor Further analogue signal processing and conditioning Calculation of ambient and object temperature using a processing unit Providing the ambient and objects temperature at digital output bus (I2C) The TSEV01CL55 is suitable for a wide range of application where non-contact The TSEV01CL55 is equipped with a silicon lens (back focal length = 5.5mm) to narrow the field of view. I2C pull-up resistors are provided on the sensor. The I2C interface does not block the clock for clock-stretching. FEATURES * 0'C - 300'C Measurement Range * 4V - 16V Supply Voltage Range * Up to 1.5% Accuracy * 2mA Current Consumption APPLICATIONS * Contact less Temperature Measurement * Climate Control * Industrial Process Control * Household Applications -
SE564 ORP Sensor Heavy duty ORP sensor providing high reliability and precision Heavy duty ORP electrode designed for highly contaminated media and high-pres- sure applications with pressure fluctuations. The state-of-the-art polymer electrolyte of the reference system provides good long- term stability. The 2-hole junction prevents blocking also in waste water containing solid impurities. The platinum electrode is insensitive to oxidizing acids even at elevated temperatures. Facts perfect galvanic isolation thanks to Memosens technology no influence of humidity in the connector digital data transfer integrated sensor diagnostics state-of-the-art polymer electrolyte integrated temperature detector 2-hole junction - no blocking for industrial sewages for processes with large pressure fluctuations suitable for solvent-containing processes Applications Process industry, chemistry, industrial sewage, high-pressure applications Specifications ORP: -1500 mV ~ +1500 mV Temperature: 0 ~ 130 'C Pressure: up to 10 bars Temperature detector NTC 30 kohms Sensor material: platinum Reference system: Ag/AgCl, polymer electrolyte Junction: hole (2x) Length: 120 mm / 225 mm Sensor cap: Memosens ATEX certificate: II 1 G Ex ia IIC T3 / T4 / T6
Parameters: 1)storage temperature: -40 to 125ºc 2)supply voltage: 3.8v 3)humidity operating range: 1-100%rh 4)temperature operating range: -40 to 125ºc 5)vdd to gnd:-0.3 to 3.6v 6)digital i/o pins (data/sck) to vdd:-0.3 to vdd+0.3v 7)-10 to +10 ma Features: (1)dfn type package (2)relative humidity and temperature digital output, i2c interface (3)fully calibrated (4)lead free sensor, reflow solderable (5)low power consumption (6)fast response time and very low temperature coefficient Isweek provide smoke, gas, humidity&temperature, uv, fluid or other kinds of sensors More details welcome to inquiry: skype:isweek_laura
Application: Sports Watches, Fishing Barometer, 3D Navigation, Outdoor Waterproof Equipment, etc. Sensor Advantages: Waterproof resistant, O-ring seal Industry's first, high precision (1m) Ultra-low power consumption, extreme power saving Ceramic substrate, high temperature resistance, higher stability 24 bits ADC with DSP, direct output of pressure, altitude and temperature values Reflow soldering allowed, enabling efficient placement Parameter: Output Value: Pressure\Altitude\Temperature Pressure Range: 300mbar~1200mbar Pressure Accuracy: +/-1.0mbar Programmable Interrupt: Support Altitude Resolution: 10cm Pressure Resolution: 0.01mbar Temperature Resolution: 0.01 Temperature Range: -40~+85 Temperature Accuracy: +/-1.0 Output Interface: I2 C Supply Voltage: 1.8~3.6V Standby Current: < 0.1|¨¬A Waterproof: O-ring seal Size: 4.5X4.5X3.5mm Certifications: RoHS\ESD\FCC\ETSI\REACH\Reliability Report Hope Microelectronics Company Tel: +86-4001-189-180 Fax: +86-755-82973550 Website: http://www.hoperf.com carton
"The TandD RTR-574-S Wireless Temperature Humidity Light Data Logger The RTR-574-S Wireless Temperature Humidity Light Data Logger includes two sensors that simultaneously measure and record illuminance / UV intensity and temperature/humidity. This high accuracy data logger allows for the measuring and recording of the above items in various places such as facilities where people gather, where important documents and fine arts are being stored or displayed, where food and drink are being stored. Also, cumulative illuminance and the cumulative amount of UV light can be easily viewed even without stopping recording."
Place of Origin: California, United States Brand Name: Original Model Number: HMS K1C1 F5.5 Usage: HMS K1C1 F5.5 Theory: Sensor Output: Sensor Lowest price: Pls Contact us! Lead time: 1-2days Condition: 100% New and Original WhatsApp: +8613715255627 Shipment: DHL/FEDEX/TNT/UPS/EMS.etc More detail: Contact us!!
Place of Origin: USA Brand Name: Melexis Model Number: MLX90614ESF-BCF Usage: Temperature Sensor Theory: Ultrasonic Sensor Description: MLX90614ESF-BCF Product name: MLX90614ESF-BCF Brand: Melexis Place of origin: United States Operation temperature: -40â?? to +85â?? Output: Digital Sensor Condition: Brand-new Warranty: 1 Year D/C: +19
Place of Origin: original Brand Name: original Model Number: OTP-638D2 Usage: Other Theory: Other Output: Other Description: OTP-638D2 Color: Original Color Shipping Term: DHL/TNT/FEDEX Payment: Union.Paypal TT Delivery time: 3 working days Quality: original
Supplier of walk-in environmental test chamber. Designed to perform high-temperature operations for large-sized test specimens. The multipurpose walk-in chamber is the perfect site for testing the components against humidity, temperature, and various climate conditions.
Why I need it? High relative humidity can cause significant, possibly irreparable damage to sensitive equipment, supplies, and products. To ensure dehydration measures work, humidity indicator cards measure the relative humidity (RH) inside sealed packages to allow immediate visual inspection of whether it has sustained unsafe humidity levels. Why I need choose your product? Existing humidity indicator cards found in the market are impregnated with a chemical called cobalt chloride In the dry state, cobalt chloride is blue in color. After absorbing moisture cobalt chloride changes to pink color. A recent amendment made to the European CEE directive 67-548 pertaining to the Classification, Packaging and Labeling of dangerous materials, has classified cobalt chloride as a carcinogenic material. Improper handling of items containing carcinogen may cause health hazards and environment hazards, thus, goods containing cobalt chloride will not meet EU standards. Our new range of humidity indicator cards are carcinogen-free and meet EU standards and color change can be blue to pink, yellow to azure, blown to green. Advantage: Reversible Competitive price Bright color; high recognition Meet ROHS, EU standards, SGS A back film to prevent chemical to reverse to your products Using environmentally friendly ink and moisture-sensitive chemical Usage : 1. The humidity indicator spots will change from blue (dry condition) to pink (humidity condition) as the relative humidity changes in the volume of air surrounding the indicator. 2.Relative humidity is indicated at the lavender color. 3.Indicator spots will change within eight hours of being exposed to a change in relative humidity. 4.The humidity indicator spots are reversible, and the pink spots will change back to blue when the volume of air is dried. Humidity indicator cards with pink or lavender spots can be returned to a blue color by placing indicators in a sealed container with 33 grams (1 unit) of desiccant for four hours. However, we do not recommend reversing or using cards that have been exposed to high humidity in excess of 60 percent. 5.The highest humidity indicator spot should be blue before being put into use. 6.The humidity indicator will be at its most accurate at a temperature of 23 degrees Celsius 72 degrees Fahrenheit. 7.Avoid contact with indicator spots. Wash any irritated areas with clean water.
OEM: 036906262t TB NO.: 2912502A Sensor Type: 5 wire wideband oxygen sensor Fitting: For SEATIBIZA IV (6L1) (2002/02 - 2009/11) For SEATCORDOBA (6L2) (2002/09 - 2009/11) For SKODAFABIA (6Y2) (1999/08 - 2008/03) For SKODAFABIA Combi (6Y5) (2000/04 - 2007/12) For SKODAFABIA Saloon (6Y3) (1999/10 - 2007/12) For POLO (9N_) (2001/10 - 2012/01) For POLO Saloon (9A4) (2002/09 - /)
HIGH PERFORMANCE TRUCK RADIATOR FOR MITSUBISHI CANTER 5.2D 4M51 02- AT OEM: NISSENS : Year : OEM : Car Make : MITSUBISHI Inquire Download Email Product Description Products you may also interested in MOQ :30 PCS Port :Nanjing or Shanghai BT NO. :UT-BS-0245 Supply Ability :600000 sets/year Core Size :520*518*48AT Place of Origin :Jiangsu, China Application :CANTER 5.2D 4M51 02- AT DPI No : Warranty :12 months Packaging :Carton Box or as your request Delivery :45 days
We have for immediate delivery 3000 Metric tons of used Oil rig anchor chain
Detection gas CO Measurement Range 0~1000ppm Max detecting concentration 2000ppm Sensitivity (3~12)nA/ppm Resolution ratio 1ppm Response time(T90) 30S Load resistance(recommend) 1000 Repeatability
