Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Product Name: Frozen Tapioca Origin: Viet Nam Storage type: Frozen (-18�°C) Material: 100% Fresh Cassava Color: Natural color of cassava Moisture: 13% max. Starch: 85% min Shape: Whole, Sliced, Chunk, Diced Taste: Sweet, fragrant and fatty Shelf life: 24 months under -18C Usage: Boil, steam, make cakes... Packaging: 500g - 1kg/bag x 10kg/carton or as customer's requirement.
Specification: Origin: Vietnam. Storage type: Frozen (-18�°C) Color: Natural green color Material: 100% Fresh Dong leaves Shape: Whole Usage: package of traditional cakes Preservation process: clean, steam, keep cool in 10-12 degree Shelf life: 24 months under -18C Packing: 1 kg PA/bag and then 10kg/Carton box or as per customer's requirement.
Product name: Dried Tilapia Fish Scale Size: 0.2 - 1.2 cm Color: From ivory to whitish Odor: No odor or a bit fishy Moisture: 10% max Impurity (bone, skin, etc): 4% max Cleaning method: Carefully Washed Drying process: Solar heat (Sun-dried) Packing: 15 - 30 kgs PP bag or customer's request Capacity: 20 Tons/ month Shelf life: 24 Months
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
Type: Tomato Powder (Herbal Extract). Variety : normal or cherry tomato. pH: 4. Acid: 4-4.5%. Salt : 0.8% - 1.0%. Brix : 22-24%, 18-20%, 28-30%. Quantity capacity : 50mts/month. MOQ: 1ton. Preserving in common condition, shelf life: 12 months. Packed in aseptic bag, drums 220kg, 1 x 20ft = 80 bins. Price: please contact for updated price. Payment & delivery: L/C at sight or T/T 30% in advance. Lead time: 2 weeks/ 1*20'FCL.
Product type: Cowpea beans/kabuli Process : HPS Crop : Recent Crop Place of origin : South Africa Size : 6-8MM/7-9MM/8-10MM Moisture : 15% max Admixture : 0.5% max Imperfect rate : 3% max Packing : 25/50 kgs pp bag Delivery time : 7-10 days after payment Payment terms : T/T,L/C,D/P or D/A Supply ablitity : 500 Metric Ton/Metric Tons per Month MOQ 23MT Use Food
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment : T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Product name: Vietnam rattan webbing Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment : T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Tumi Ishi blocks are small chunks of wood, cut kind of like a gemstone. Basically the idea is you are supposed to stack them all up. Tumi ishi Wood Balancing Stones for Baby is a new take on the classic wooden building block. Unlike standard square blocks, these blocks have many sides making them more challenging to stack Type: Block Set, Other Classic Toys Material: Wood Size: 3-6cm Color: Natural color Logo: Customized Logo Age Range: 0 to 24 Months, 2 to 4 Years, 5 to 7 years, 8 to 13 Years,... Usage: Relaxing, Educate, Simulate brain development for kids Packing: Bag/carton
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Rattan cane webbing is a handcrafted product. The artisans select the straight and soft rattan cane to weave into the webbing. While weaving, the artisans have to calibrate the net meticulously to make each pattern uniform in the net. Therefore, it takes more than 10 days for one artisan to knit a long rattan webbing sheet with the dimension: 45 centimeters wide and 15 meters long. The final product is beautiful and durable to the time. Moreover, this product is easy to clean and maintenance. Product name: Rattan webbing. Usage: For rattan furniture. Dimension: Width 45cm, 60cm, 70cm, 90cm,... X 15m length. Packing: Carton, pallet, big bag, strap or customized. MOQ: 10 rolls. Delivery time: 7-30 days after sample approved or according to customer's exact order. Trade Terms: FOB, CNF, CIF
Rattan webbing made from rattan core is called reed webbing. These are elegant looking furniture materials that enhance quality. Cane webbing is made from rattan strong enough to support the weight of a sitting person and flexible enough to bend around the sharp corner of wooden frames. Material: Rattan, plastic. Usage: For rattan furniture Size: With 0.6m X 15 length = 9 square meter Packing: Carton, pallet, big bag, strap or Customized MOQ: 04 rolls Packing: 25pcs/ carton. Each wrap with paper/ Bubble bag in carton box/Customer request Payment: T/T 30% deposit, balance against copy of B/L or L/C at sight, irrevocable Sample time: 7 -10 days Shipment: By Air, by Sea, by Express (DHL,TNT,UPS,EMS,Fed Ex)
Greetings, my name is Sandra Moses-Adams, Owner of Moses Enterprise, a Sourcing Agency located in the USA. I am currently working with a Fuel Supplier located in the USA, if your Buyer is looking for EN590 or A1Jet Fuel see SOP & pricing below. After reviewing the SOP and you are agreeable with the price please email or post to WhatsApp your LOI and I will open a group with my Seller Mandate. My SM will arrange a Zoom call with the Seller to discuss your requirements. TRANSACTION PROCEDURES FOB TANK TO TANK 1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery. 2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice alongside buyer tank storage agreement (TSA) for verification. 3. Seller provide buyer with the below listed PPOP. Product Passport (product analysis report) Irrevocable Commitment Letter to Supplier Tank Storage Receipt (TSR) Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm. 4. Seller provides buyer with SGS report, Injection Report, unconditional DTA. 5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage receipt (TSR) seller proceed for Tank-to-Tank injection and provide the buyer with the injection report of the product into buyer tanks. 6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to buyer with all exportation documents required of buyer for the transaction. 7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer. 8. TARGET PRICE: EN590 / $650MT