This DC to AC inverter is designed for the backlight of 6.4-15.1" LCD Panel with single CCFL lamp Input voltage: 12VDC Kick-off Voltage: min1500 Lamp Voltage: 500V Output Connector Mode: SM02B/ SM02 (8.0)*2 Transformer Qty: 2 Output Current: 6mA Output Voltage: 500V Frequency: 40 KHz Dimmer: Yes Dimension : 95.5mm*20mm*4.7mm.
Application: PEUGEOT EXPERT Tepee (VF3V_) 2.0 Hdi 07- FIAT SCUDO 2.0 D Multijet 07- CITROEN JUMPY 2.0 HDi 120 07- OE No. 6455.ES Packaging Size: 69,1x48,6x6,9cm Gross Weight: 3,2kg
1MW String Inverters/
1MW String Inverters. Crate.
Polo DC Inverter 12,000 Btu, R410A heating capacity 5, 6 kw cop 3, 72 cooling capacity 5,3 kW EER 3,56 ¦ 420 prices are EXW for 15 pcs or more. Installation kit ¦ 55 Containing the following: a. 5 meters Connection Pipe: one pair, thickness 0,81 mm, dimension + & 3/8 or + & +. b. Bracket in galvanised steel EXW ¦ 15 c. Wall-Tube with Tube Cover for installation: 1 set d. Drainage Hose: 1pc e. Binding Tape: 1pc f. Warm-Insulated Tube: 1pc g. Vibration restrains: 4pcs h. Power Cable (5x1.5 sq mm): 1pc
General KYN28A-12 type metalclad withdrawable switchgear is a complete set of three phase AC indoor device and applicable to the singlebusbar and single busbar section power system of which the rated voltage is 3.6 to 12 kV,the reated frequency is 50/60Hz,Having perfect"five prevention"function,Used for power reception and power distribution,the device is mainly used in power plant,transformer substation,industrial and mining enterprises and high building,Having the function of controlling,protecting and monitoring the circuit. Standards: - KYN28A-12 switchgear meets the following domestic and international standards: IEC62271-200, GB3906, GB/T11022, DL/T404, etc.. Working condition: Normal working condition Ambient temperature: - Maximum temperature +40 C - Average value is no more than +35 C - Minimum temperature -15 C Ambient humidity - Daily average relative humidity of 95% and below - Average relative humidity of 90% and below - Maximum altitude of 1000 meters of the place of installation - Earthquake intensity is not more than 8 degrees, there is no fire, explosion danger, serious pollution, chemical corrosion and violent vibration. Technical data:
Metal Clad Switchgears SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards. SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards. 3mm sheet steels LSC 2B class Loss of Service Continuity Pm Partition Class AFLR Internal Arc Classification 4 earthed accessible compartments Maximum personnel safety with 31.5 kA/ 1 s internal arc test. Safety electrical and mechanical Interlocking systems. Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lightening Impulse withstand Voltage : 40185 kV Rated Frequency : 50/60 Hz Rated Current ( natural ventilation ) : 6303150 A Short Circuit withstand Current : 1631.5 kA ( 3 s ) Internal Arc withstand Current : 1631.5 kA ( 1 s ).
SME series Metal Enclosed Switchgears are defined with followwing features 2 mm sheet steel LSC 2A Loss of Service Continuity Pl Partition Class AFL Internal Arc Classification 3 earted accessible compartmments Maximum personel safety with up to 25 kA / 1s internal arc test Safety electrical and mechanical Interlocking systems SF6 gas insulated Circuit Breaker allows fast and easy servicing Grounding systems with ensured continuity. General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lighting Impulse withstand Voltage : 40185 kV Rated Frequency : 50 / 60 Hz Rated Current : 6301250 A Short time withstand current : 16/20/25 kA ( 1 sec ) Internal Arc withstand Current: 16/20/25 kA ( 1 sec ).
We are seller of inverters.
Heating area - up to 3 sq.m. Weight - 3 kg Dimensions - 750mm x 130mm x 14mm Power consumption - 157 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture, and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil-filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and a comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white color as standard but a customer can order any color from our rich palette (over 100 colors and shades) that will match the customer's interior.
Heating area - up to 4 sq.m. Weight - 3.5 kg Dimensions - 998mm x 130mm x 14mm Power consumption - 200 Watt Manufacturer Warranty - 5 years Electric skirting panels warm up walls and help eliminate mold, fungus, moisture and condensate in rooms that usually have cold corners or cold external walls. Heating such a room with an ordinary oil filled radiator, electric water boiler, or electric fan heater will not solve the problem. Three different models of UDEN-S skirting panel heaters range between 100W, 150W, and 200W in power capacity. They can be used not only as a stand-alone heating system but also combined with other UDEN-S heaters for efficient heating and comfortable feeling in the room. Beautifully designed, our skirting panel heaters are only 13cm in height and only 14 mm in thickness. They come in white colour as standard but a customer can order any colour from our rich palette (over 100 colours and shades) that will match the customer's interior.
The behavior of the LDRB isolators is highly linear in shear stiffness and the damping ratio is 2 - 3% of critical damping. There is no creep in the material and the stability of the modulus of elasticity is very good. Advantages of LRDB insulators; they can be modulated in a simpleway and they are less affected by the factors that have mechanical behaviors. These insulators may need additional damping elements.
hello My company name Mc Metal trader and Distributor i am a HMS 1-2 supplier from UK and i can supply from 500- 10000 MT CIF Every month on L/C payment term. If u interested please get in touch on for Quotation . Kind regards
Catalytic converter scrap, copper wires scrap, abs scrap, pvc scrap, hdpe film scrap, ldpe film, tyre wire scrap, used electric motor scrap, motherboards scrap, used conveyor belt, tyres scrap, pvb film, pet film scrap, latex gloves, pa6 yarn, pet bottles scrap, pu foam scrap, eps blocks, copper cables scrap, compressor scraps, bopp film scrap, cast iron scrap, baby diaper scraps, used engines, tires scrap, tyres scrap.
LFG-50 & PT-14 Сable tracing and fault location set, can be used for locating as well as tracing underground metal communications, such as any cables with metal cores as well as metal pipes. In addition, it provides operator with a quick detection of short circuits on cables as well as with an identification of a cable in a bunch. LFG-50 is a 50 W low frequency generator with ability to inject a signal of three frequencies via direct connection to an object or via internal transmission loop antenna, which is built-in a cover lid. Basic frequencies are 491; 982 and 8440 Hz. There are options of using a single-frequency or multi-frequency signals at the output. The power of the low frequency generator LFG-50 output signal can be adjusted up to 50 W with 2.5 W steps. This signal can be transmitted constantly or broken into separate blocks of 50 % duty cycle with 1 s repetition rate. A load matching is made automatically. Main parameters, such as output power, load impedance, selected frequency are shown on OLED display. If a load is higher than 1000 Ω LFG50 automatically switches into output voltage setting mode. The output overload protection will trip, when operating on short-circuit loops (lower than 0.5 Ω). MAIN FEATURES: Portable and lightweight Moistureproof and dustproof case Advanced LiFePO4 internal battery with fast charging option High-contrast graphic OLED display Multifrequency operation Operating frequencies can be changed upon request Internal transmission loop antenna Automatic load impedance matching Ability to work with energized 0.4kV cables (inductive connection) Overload protection Сable locator PT-14 designed for fast and accurate searching for power cables and other communications, identification of coating defects and the depth, followed by mapping.
The equipment is intended for paper bags with width from 60120 mm wider widths are also possible depth 4070 mm and more without feeding conveyor min height depends on the bag filling adding 100 mm for broaching and wrapping max height without feeding conveyor up to 350 mm Assembly Length 2500 mm Width 1000 mm Height 1500 mmWork height 1150mm Motors 2 pcs Conveyor belts Frequency converter EMERSO UNIDRIVE M200 Optical sensor S51PA 2B01 PK MOQ 10 Sealer HB 5010 Buhnen Klebesystem Total electric power consumption 35 kWt
The device is designed to be used for paper rolls with a width from 60 to 120, possibly wider, with a depth of 40-70� mm� and more without a feed conveyor, min.� height depends on the filling of the box, to which 100 mm must be added for pulling through with tapes and folding, max.� height without feeding conveyor up to 350 mm. Complete set: Length ~2500 mm / width ~1000 mm / height ~1500 mm\\. Working height: 1150 mm. Motors: 2 pcs. Conveyor belts. Frequency converter: EMERSO UNIDRIVE M200. Optical sensor: S51-PA-2-B01-PK MOQ 10. Adhesive: HB 5010 Buhnen Klebesystem. Total consumed electrical power: 3.5 kWt.
Electric - electronic (relay, flasher, converter, regulator, oil pressure switch ).