INSTRUCTION An Aerosol therapy of asthma nebulizer atomizes liquid (normal saline), and sprays it into the user’s airway in order to keep the respiratory tract unobstructed, moisten the respiratory tract, and dilute sputum. 1. It is designed for infant, child and adult who has Asthma, COPD (Chronic Obstructive Pulmonary Disease), or other respiratory disorders. 2. This nebulizer atomizes liquid (normal saline), and sprays it into the user’s airway in order to keep the respiratory tract unobstructed, moisten respiratory tract, and dilute sputum 3.The mini size nebulizer that only weights 46 g (excluding battery), and the dimensions are 26 mm ( L ) x 35 mm ( W ) x 98 mm ( H ). 4. It does not need to replace the filter and medicine cups, which can save a lot of cost on the replacement parts. SPECIFICATION Method of Operation Ultrasonic Nebulizer (Atomize by Micromesh) Size Approx. 26 mm ( L ) x 35 mm ( W ) x 98 mm ( H ) Weight Approx. 46g (Excluding battery) Power 3V DC (Two “AAA”1.5V alkaline batteries) Power consumption Approx. 1W Vibrating Frequency Approx. 130kHz Spray rate Up to 0.4mL/min Particle Size MMAD Approx. 3 ~ 5µm capacity Approx. 8 mL Maximum Approx. 1 mL Minimum battery life Up to 45 minutes if used continuously. Operating Conditions 10 ? ~ 40?(50 ? ~ 104 ?), 30 ~ 85% R.H. Storage / Transportation Conditions -20 ? ~ 70?(-4 ? ~ 158 ?),
FDR-2201 Water-soluble acid and base number tester of petroleum products Scope This instrument was designed and manufactured in line with the standard GB/T259-88. It can measure liquid petroleum products, additives, grease, paraffin wax and waxy component water-soluble acid number or water-soluble base number. First, water soluble acid or alkali in the sample was extracted with distilled water or ethanol water solution, and then the extract was determined by pH indicator or indicator. Features 1, the instrument consists of two parts, the structure is simple, fully meet the requirements of the GB/T 259 standard. 2, the instrument adopts the independent control of the heating furnace, heating power continuously adjustable, heating control is extremely convenient. 3, the heating furnace using the glass fiber woven heating plate, it has the advantage of high heating efficiency, low energy consumption, no flame, etc.. 4, the test is convenient, the operation is simple, the measurement result is accurate. Technical Parameters 1. Power supply: AC220V ± 10%; 50Hz. 2, heating power: 100W ~ 1000W continuously adjustable. 3, pH meter: Range: 0 ~ 14.00pH, accuracy: ± 0.01pH. 4, sub-funnel: 250ml. 5, cylinder: 100 ml, 50 ml. 6, tube: 18 mm 100 mm. 7, Erlenmeyer flask: 100 ml. 8, the ambient temperature: -10 ~ + 35 . 9, relative humidity: 85%. 10. Total power consumption: less than 1200W.
Scope This instrument was designed and manufactured in line with the standard GB / T259-88 "Petroleum products Determination of water-soluble acid and base". It can measure liquid petroleum products, additives, grease, paraffin, wax and waxy component water-soluble acid or water-soluble base. First, water soluble acid or alkali in the sample was extracted with distilled water or ethanol water solution, and then the extract was determined by pH indicator or indicator. Features 1, the instrument consists of two parts, simple structure, in full compliance with the requirements of GB / T 259 standard requirements. 2, can be independently controlled heating furnace, heating power continuously adjustable, heating control is extremely convenient. 3, the heating furnace using a heating plate glass braid, with a high heating efficiency, low energy consumption, no fire and so on. 4, test is convenient, easy to operate, accurate results. Technical Parameters 1 Power supply: AC220V ± 10%; 50Hz. 2 heating power: 100W ~ 1000W continuously adjustable. 3, pH meter: Range 0 ~ 14.00pH, accuracy ± 0.01pH. 4, sub-funnel: 250ml. 5, cylinder: 100 ml, 50 ml. 6, tube: F18 mm × 100 mm. 7, Erlenmeyer flask: 100 ml. 8, the ambient temperature: -10 ? ~ + 35 ?. 9, relative humidity: =85%. 10. Total power consumption: less than 1200W.
Essential Oils Aniseed Oil - USD 70/- Basil Oil - USD 70/- Bergamot Oil - USD 75/- Black Pepper Oil - USD 115/- Cardamom Oil - USD 200/- Catnip Oil - USD 85/- Cedarwood Oil - USD 70/- Cinnamon Bark Oil - USD 90/- Cinnamon Leaf Oil - USD 30/- Citronella Oil - USD 45/- Clary Sage Oil - USD 90/- Clove Bud Oil - USD 125/- Clove Stem Oil - USD 70/- Eucalyptus Oil - USD 30/- Frankincense Oil - USD 90/- Garlic Oil - USD 130/- Geranium Oil - USD 110/- Ginger Oil - USD 150/- Grapefruit Oil - USD 70/- Helichrysum Oil - USD 350/- Juniper Berry Oil - USD 90/- Lavender Oil - USD 115/- Lemon Oil - USD 55/- Lemongrass Oil - USD 55/- Lime Oil - Rs. USD 55/- Marjoram Oil - USD 120/- Melissa Oil - USD 80/- Myrrh Oil - USD 80/- Myrtle Oil - USD 60/- Niaouli Oil - USD 65/- Nutmeg Oil - USD 80/- Oregano Oil - USD 55/- Palmarosa Oil - USD 65/- Patchouli Oil - USD 140/- Peppermint Oil - USD 65/- Red Chilie Oil - USD 70/- Rosemary Oil - USD 90/- Sandalwood Oil - USD 1,350/- Spearmint Oil - USD 80/- Star Anise Oil - USD 90/- Sweet Orange Oil - USD 35/- Tea Tree Oil - USD 100/- Thyme Oil - USD 55/- Vetiver Oil - USD 200/- Wintergreen Oil - USD 35/- Ylang Ylang Oil - USD 90/- Floral Extracts Blue Lotus Oil- USD 115/- Chamomile Roman Oil - USD 125/- Frangipani Oil - USD 115/- Gardenia Oil - USD 125/- Jasmine Oil - USD 125/- Neroli Oil - USD 100/- Pink Lotus Oil - USD 115/- Rose Oil - USD 115/- Sepalika Oil - USD 125/- Vanilla Oil - USD 115/- White Lotus Oil - USD 115/- Carrier Oils Almond Oil - USD 35/- Argan Oil - USD 85/- Jojoba Oil - USD 60/- Butters Shea Butter refined - USD 20/- Mango Butter refined - USD 25/- Coco Butter refined - USD 20/- Avocado Butter - USD 25/- Aloevera Gel - USD 11/- Sandalwood Powder - USD 65/- Massage Oils - USD 10/- - USD 20/- per liter depends on the combination. Glycerin Transparent Soap - USD 1/- per 100 gram bar Shampoo - USD 1/- per 100 ml Conditioner - USD 1.50/- per 100 ml Natural Soaps - USD 1/- per 100 gram bar
1. Product name Product Name: Everlasting Red 170, Everlasting Red F3RK International Index Number: C.I Pigment Red 170 CAS Registry Number: 2786-76-7 EC registration number: 220-509-3 Product series: monoazo pigments 2. Physical and chemical properties and fastness properties Molecular weight: 454.48 Molecular formula: C26H22N4O4 PH value: 6.5-7.5 Specific gravity: 1.5 Oil absorption (ml/100g): 35-45 Light fastness: level 7 Weather resistance: grade 4-5 Heat resistance: 240 Water resistance: level 5 Oil resistance: level 5 Acid resistance: level 5 Alkali resistance: level 5 3. Application areas 1). Shade: Yellow light 2). Uses: coatings, plastics, inks. Mainly used for coatings, can be combined with molybdenum chrome red, quinacridone, recommended for printing ink, high tinting strength, light fastness grade 6, acid and alkali resistance, soap resistance, heat stability 200/10min , used for metal decoration printing ink, can also be used for pigment printing and plastic pulp coloring, wood and viscose fiber coloring.
Boron Ethanolamine 10% DyBor is a liquid fertilizer carrier of boron (B) in the form of boron ethanolamine which provides and maintains the levels of boron. DyBor is readily absorbed through plant leaves, shoots, roots and reproductive structures. The product is concentrated and only a small amount is needed. When properly used, it promotes greater crop health and higher yields whenever boron availability is limiting crop performance. It is particularly suitable both for foliar and root applications Composition: Boron (as B) per cent by weight, minimum 10% pH 8.5 +/- Lead (as Pb) per cent by weight maximum 0.003% Arsenic (as As) per cent by weight maximum 0.01% Cadmium (as Cd) per cent by weight maximum 0.0025% Benefits: Recommended for the preventive and curative control of insufficiency due to deficiency or poor assimilation of Boron. Essential in the activity growing regions of plants, such as root tips, and leaf and bud development. Required in large amount during reproductive stage of plant also the production of pollen and fertilization. Promotes calcium mobility and assimilation particularly in the binding of calcium to form cell walls and membranes of plant. Increases sugar transports by photosynthesis in mature plant leaves to actively in developing fruits. Plays an important role in regulating hormone levels in plants for Flower initiation, fruit development, cell wall and tissue formation, and root elongation. Recommended for Some crop-specific boron deficiency symptoms include crooked stem in celery, hollow heart in peanut, corky core in apple, rosetting (terminal bud dieback) in alfalfa and cotton and heart rot in sugar beet. Dosage & Application : 1. Crop Cereals, pulses & oilseeds ml / litter of water - 1 to 1.5 Time of application - First spray at 35-40 days after sowing/transplanting. And the second spray 15 days later. If required, give third spray 15 days later 2 . Crop Commercial crops & Vegetable crops ml / litter of water -2 Time of application - First spray at 45-50 days after planting/sowing with 1-2 follow up sprays at 15 days interval 3 .Crop Plantation Crops ml / litter of water - 2.5 Time of application - First spray during May with 1-2 follow up sprays at 15 days interval. If there is a break in monsoon, apply once.
Zjm decelerator associated hydraulic motor is made up of planet gear decelerator and hydraulic motor. Small, stable at low speed, high performance and low price. Especially fit for small radial space, low speed and large torque needed working place. Technical data Type Displacement Ml/r Max pressure Mpa Max torque N.M Speed Range (r/min)n Ratio of Gearbox Associated Motor Weight Kg Mm Length Zjm1.03-730/b 728.6 11.5 1000 9-60 4.85 Bm4-160 40 425 Zjm1.03-920/b 921.3 13.6 1500 9-60 4.85 Bm4-200 40 429.5 Zjm1.03-1450/b 1456.8 11.5 2000 9-50 4.85 Bm4-320 40 442 Zjm1.03-1840/b 1842.6 13.7 3000 9-40 4.85 Bm4-400 40 451 Zjm1.06-2730/b 2731.3 12.3 4000 7-40 4.42 Bm5-630 100 465.5 Zjm1.06-3480/b 3481.1 12 5000 6-35 4.42 Bm5-800 100 479.5 Zjm1.06-4285/b 4284.4 11.7 6000 6-30 4.42 Bm5-985 100 494.5 Zjm600/c 580 20 1500 3-65 6 Jmdg2-100 45 350 Zjm900/c 940 20 2260 3-65 6 Jmdg2-150 45 350 Zjm1000/c 1050 20 2630 3-65 6 Jmdg2-175 45 350 Zjm1200/c 1200 20 3000 3-65 6 Jmdg2-200 45 350 Zjm1500/c 1520 25 4780 2-58 6 Jmdg3-250 85 345 Zjm1800/c 1730 20 4500 2-58 6 Jmdg3-300 85 345 Zjm2100/c 2100 20 5260 2-58 6 Jmdg3-350 85 345 Zjm4200/c 4258 14.8 8000 7-35 5.6 Jmdg6-750 - 497.5 Zjm6300/c 6307 15 12000 6-35 5.6 Jmdg8y-1100 - 502.5 Zjm7000/c 6900 20 17500 3-65 5 Jmdg16-1400 - 478 Zjm10000/c 10000 20 25400 3-45 5 Jmdg16-2000 - 478 Zjm12000/c 12000 16 24000 3-40 5 Jmdg16-2400 - 478
Zjm decelerator associated hydraulic motor is made up of planet gear decelerator and hydraulic motor. Small, stable at low speed, high performance and low price. Especially fit for small radial space, low speed and large torque needed working place. Technical data Type Displacement Ml/r Max pressure Mpa Max torque N.M Speed Range (r/min)n Ratio of Gearbox Associated Motor Weight Kg Mm Length Zjm1.03-730/b 728.6 11.5 1000 9-60 4.85 Bm4-160 40 425 Zjm1.03-920/b 921.3 13.6 1500 9-60 4.85 Bm4-200 40 429.5 Zjm1.03-1450/b 1456.8 11.5 2000 9-50 4.85 Bm4-320 40 442 Zjm1.03-1840/b 1842.6 13.7 3000 9-40 4.85 Bm4-400 40 451 Zjm1.06-2730/b 2731.3 12.3 4000 7-40 4.42 Bm5-630 100 465.5 Zjm1.06-3480/b 3481.1 12 5000 6-35 4.42 Bm5-800 100 479.5 Zjm1.06-4285/b 4284.4 11.7 6000 6-30 4.42 Bm5-985 100 494.5 Zjm600/c 580 20 1500 3-65 6 Jmdg2-100 45 350 Zjm900/c 940 20 2260 3-65 6 Jmdg2-150 45 350 Zjm1000/c 1050 20 2630 3-65 6 Jmdg2-175 45 350 Zjm1200/c 1200 20 3000 3-65 6 Jmdg2-200 45 350 Zjm1500/c 1520 25 4780 2-58 6 Jmdg3-250 85 345 Zjm1800/c 1730 20 4500 2-58 6 Jmdg3-300 85 345 Zjm2100/c 2100 20 5260 2-58 6 Jmdg3-350 85 345 Zjm4200/c 4258 14.8 8000 7-35 5.6 Jmdg6-750 - 497.5 Zjm6300/c 6307 15 12000 6-35 5.6 Jmdg8y-1100 - 502.5 Zjm7000/c 6900 20 17500 3-65 5 Jmdg16-1400 - 478 Zjm10000/c 10000 20 25400 3-45 5 Jmdg16-2000 - 478 Zjm12000/c 12000 16 24000 3-40 5 Jmdg16-2400 - 478
Zjm decelerator associated hydraulic motor is made up of planet gear decelerator and hydraulic motor. Small, stable at low speed, high performance and low price. Especially fit for small radial space, low speed and large torque needed working place. Technical data Type Displacement Ml/r Max pressure Mpa Max torque N.M Speed Range (r/min)n Ratio of Gearbox Associated Motor Weight Kg Mm Length Zjm1.03-730/b 728.6 11.5 1000 9-60 4.85 Bm4-160 40 425 Zjm1.03-920/b 921.3 13.6 1500 9-60 4.85 Bm4-200 40 429.5 Zjm1.03-1450/b 1456.8 11.5 2000 9-50 4.85 Bm4-320 40 442 Zjm1.03-1840/b 1842.6 13.7 3000 9-40 4.85 Bm4-400 40 451 Zjm1.06-2730/b 2731.3 12.3 4000 7-40 4.42 Bm5-630 100 465.5 Zjm1.06-3480/b 3481.1 12 5000 6-35 4.42 Bm5-800 100 479.5 Zjm1.06-4285/b 4284.4 11.7 6000 6-30 4.42 Bm5-985 100 494.5 Zjm600/c 580 20 1500 3-65 6 Jmdg2-100 45 350 Zjm900/c 940 20 2260 3-65 6 Jmdg2-150 45 350 Zjm1000/c 1050 20 2630 3-65 6 Jmdg2-175 45 350 Zjm1200/c 1200 20 3000 3-65 6 Jmdg2-200 45 350 Zjm1500/c 1520 25 4780 2-58 6 Jmdg3-250 85 345 Zjm1800/c 1730 20 4500 2-58 6 Jmdg3-300 85 345 Zjm2100/c 2100 20 5260 2-58 6 Jmdg3-350 85 345 Zjm4200/c 4258 14.8 8000 7-35 5.6 Jmdg6-750 - 497.5 Zjm6300/c 6307 15 12000 6-35 5.6 Jmdg8y-1100 - 502.5 Zjm7000/c 6900 20 17500 3-65 5 Jmdg16-1400 - 478 Zjm10000/c 10000 20 25400 3-45 5 Jmdg16-2000 - 478 Zjm12000/c 12000 16 24000 3-40 5 Jmdg16-2400 - 478
Zjm decelerator associated hydraulic motor is made up of planet gear decelerator and hydraulic motor. Small, stable at low speed, high performance and low price. Especially fit for small radial space, low speed and large torque needed working place. Technical data Type Displacement Ml/r Max pressure Mpa Max torque N.M Speed Range (r/min)n Ratio of Gearbox Associated Motor Weight Kg Mm Length Zjm1.03-730/b 728.6 11.5 1000 9-60 4.85 Bm4-160 40 425 Zjm1.03-920/b 921.3 13.6 1500 9-60 4.85 Bm4-200 40 429.5 Zjm1.03-1450/b 1456.8 11.5 2000 9-50 4.85 Bm4-320 40 442 Zjm1.03-1840/b 1842.6 13.7 3000 9-40 4.85 Bm4-400 40 451 Zjm1.06-2730/b 2731.3 12.3 4000 7-40 4.42 Bm5-630 100 465.5 Zjm1.06-3480/b 3481.1 12 5000 6-35 4.42 Bm5-800 100 479.5 Zjm1.06-4285/b 4284.4 11.7 6000 6-30 4.42 Bm5-985 100 494.5 Zjm600/c 580 20 1500 3-65 6 Jmdg2-100 45 350 Zjm900/c 940 20 2260 3-65 6 Jmdg2-150 45 350 Zjm1000/c 1050 20 2630 3-65 6 Jmdg2-175 45 350 Zjm1200/c 1200 20 3000 3-65 6 Jmdg2-200 45 350 Zjm1500/c 1520 25 4780 2-58 6 Jmdg3-250 85 345 Zjm1800/c 1730 20 4500 2-58 6 Jmdg3-300 85 345 Zjm2100/c 2100 20 5260 2-58 6 Jmdg3-350 85 345 Zjm4200/c 4258 14.8 8000 7-35 5.6 Jmdg6-750 - 497.5 Zjm6300/c 6307 15 12000 6-35 5.6 Jmdg8y-1100 - 502.5 Zjm7000/c 6900 20 17500 3-65 5 Jmdg16-1400 - 478 Zjm10000/c 10000 20 25400 3-45 5 Jmdg16-2000 - 478 Zjm12000/c 12000 16 24000 3-40 5 Jmdg16-2400 - 478
Scope Liquid hydrocarbons traces of water analysis has been connected with the cylinder capillary water bath gasification were analyzed by reduction method. This is a more feasible approach. Flash vaporization injector is our new design, manufacture products, using SCM control, aided by high-precision mass flow meter, able to quickly and accurately control the flow rate and totalized flow, such as olefins successfully solved this trace water analysis a technical problem. And its easy operation, accurate measurement to obtain full recognition by the industry. The instrument used liquid hydrocarbons pretreatment prior to analysis, the liquid sample is converted to other components, constant temperature, constant pressure, can control the flow of gaseous hydrocarbons in order to facilitate the determination. This product is suitable for sample preparation prior to analysis of various items of the following: 1. Ethylene, propylene and butene isomers in trace analysis of water; 2. Various types of olefin polymerization grade or liquefied petroleum gas in trace oxygen, trace sulfur analysis; 3. Various types of polymer grade olefins trace of carbon monoxide, carbon dioxide analysis; 4. Liquid hydrocarbon composition analysis. 5. As for the permanent gases: nitrogen, hydrogen, air and other trace water analysis. Features 1, the use of large-screen LCD, the friendly man-machine communication interface 2, real-time display the contents of the various parameters, user-friendly real-time understanding of experimental data 3, using imported flow meter control program, more accurate experimental data 4, Friends single chip control system, instrumentation stable 5, can be configured to trace moisture, dew point, chromatography and other devices, widely used Technical Parameters 1, the display mode: LCD large-screen LCD displays. 2, Display: instantaneous flow, cumulative flow, instantaneous flow presets, preset totalizer, metal bath gasification chamber temperature, preset temperature. 3, the instantaneous flow rate range: 0-1000SCCM (ml), users can request custom processing. 4, the cumulative flow range: 0-99999SCCM (ml), users can request custom processing. 5, flow measurement accuracy: ± 1.0% (F.S). 6, the gasification chamber temperature range: room temperature -100 . 7, the temperature measurement accuracy: 0.5 . 8, the use of the environment: temperature 5 -35 ; humidity below 75%. 9, the use of power: 220V ± 10%, 50Hz ± 1Hz.
Product Name Human Chorionic Gonadotropin (HCG) Test Kit (Immunofluorescence Chromatography) Purpose To detect the content of HCG in human plasma/serum/whole blood in vitro quantitatively.For Professional Use only. Principles of Detection The HCG Test is a fluorescent lateral flow immunoassay. The test consists of: 1) a conjugate pad containing HCG antibody conjugated with fluorescent microspheres and a control antibody (goat anti-chicken IgY antibody) conjugated with fluorescence microspheres, 2) a nitrocellulose membrane strip containing a test line (T line) and a control line (C line). The T line is pre-coated with another HCG antibody, and the C line is pre-coated with a control line antibody (chicken IgY antibody). HCG concentration in specimen is positively correlated with the fluorescent density of the microspheres, after the measure and calculation of the quantitative fluorescence immunoassay analyzer, then the analyzer would calculate the concentration of HCG according to the preset calibration curve in the machine and display the result, detection unit is mIU/mL. C line should appear in any cases, which indicates the reaction system is effective. Storage conditions and shelf life Store in a sealed aluminum foil bag at 2 - 30 C. After unpacking the aluminum foil bag under temperature 20~30 C , humidity 35~65%, please use it immediately. Shelf life 18 months. Applicable instrument Avid fluorescent immunoanalyzer model: AI-IF 600
Product Name Triiodothyronine (T3) Test Kit (Immunofluorescence Chromatography) Purpose To detect the content of T3 in human plasma/serum/whole blood in vitro quantitatively.For Professional Use only. Principles of Detection The T3 Test is a fluorescent lateral flow immunoassay. The test consists of: 1) a conjugate pad containing T3 antibody conjugated with fluorescent microspheres and a control antibody (goat anti-chicken IgY antibody) conjugated with fluorescence microspheres, 2) a nitrocellulose membrane strip containing a test line (T line) and a control line (C line). The T line is pre-coated with another T3 antigen, and the C line is pre-coated with a control line antibody (chicken IgY antibody). T3 concentration in specimen is positively correlated with the fluorescent density of the microspheres, after the measure and calculation of the quantitative fluorescence immunoassay analyzer, then the analyzer would calculate the concentration of T3 according to the preset calibration curve in the machine and display the result, detection unit is nmol/mL. C line should appear in any cases, which indicates the reaction system is effective. Storage conditions and shelf life Store in a sealed aluminum foil bag at 2~30�°C. After unpacking the aluminum foil bag under temperature 20~30 �ºC , humidity 35~65%, please use it immediately. Shelf life 18 months. Reference range Reference value:The 95% concentrations of T3 in 239 non-stationary subjects without any obvious thyroid dysfunction ranged from 1.34 to 2.73nmol/L, with a median of 1.81nmol/L;The reference value has been verified with reference to similar products already on the market. Each laboratory can build own reference range according to actual situation.
The Copper Phthalocyanine Green 7 or Pigment Green 7, is typically a synthetic green pigment. It comes from phthalocyanine dyes Group. Its made of a complex of copper(II) with chlorinated phthalocyanine. The pigment colour is soft green which is insoluble in water. Copper Phthalocyanine Green 7 is a high intensity, bright colour used in oil and acrylic based paints. Its basically used for making coats, solvent, aqueous, powder plastic, textile, detergent. And it has a better chemical stability, easily soluble, accurate composition and safe to use. Product Details: Molecular Formula - C32N8Cl14-16Cu CAS No - 1328-53-6 Chemical Name - beata blue, alpha blue Usage - Rubber Pigment Type - powder Style - Organic Pigment Supply Ability - 10 Kilograms Per Day Colour Index No. - 74160 Chemical Group - Cu-PHTHALO GREEN CAS No. - 1328-53-6 Appearance - BRIGHT GREEN POWDER Purity by acid pasting - 98% ( Min.) Oil Absorption Value - 35-40 GMS OIL / 100G OF PIGMENT Specific Gravity ( g/ml) - 1.4 To 1.45 Grit Content - 200ppm Max Free Copper - Less than 500ppm Bulk density - 3.0 Lts/kg Conductivity - 500 mS Max. pH of 10% Aq. Solution - 7.5 % Water soluble (Max.) - 0.50% Moisture Content - 0.5% Max. Dispersibility - EXCELLENT Sieve Residue (325 Mesh) - Max. 1 % Chemical Class - Phthalo. Green C.I. Number - 74260 CA Number - 1328-53-6 Chemical Formula - C32N8Cl14-16Cu Molecular Weight - 1092 to 1127 pH - 7 to 8.5 Solvent Stability - Excellent Key Application Profile: Key Raw material for manufacturing of Coating : Solvent/Aqueous/Powder Plastic: HDPE, LDPE,PVC, EVA Rubber Textile Detergent Copper Phthalocyanine Green 7 Properties: Better chemical stability Easily soluble in water Accurate composition Safe to use Packaging: HDPE bags Paper bags HDPE / Fiber / MS Drums Corrugated box
This BYC168-A4 UV printer has 16 * 29.7 cm (6.3 inches * 11.7 inches) UV print size, delivers remarkable efficiency and versatility with high-capacity Continuous Ink Supply System, high-quality UV ink, and L800 Advanced MicroPiezo DX8 print head, yields beautiful prints with an unprecedented high definition. Model: BYC168-A4 UV flatbed printer -- Multi-Function: directly print design from computer onto most flat or close-to-flat surface such as acrylic, ABS, PVC, wood, leather, mobile phone case, card, CD, pen, golf ball etc by using UV ink. It can also use specialized optional ink to print on special product such as t shirt, cake, chocolate, cookie, candy, macaroon etc. -- Industry-leading UV ink technology - KMBYC UV ink for colorful, vibrant prints, beautiful colors that are highly water, smudge and fade-resistant, embossment effect with multi-times printing. -- UV cooling system: water circulation + cooling fan -- Drive system: lead screw + servo motor -- Continuous Ink Supply System100 ml Individual, large refill cartridge - change cartridges less often. -- Connectivity - Hi-Speed USB 2.0 -- Precision 6-channel print head technology - innovative MicroPiezo print head with ink-repelling coating for more accurate dot placement and reduced maintenance. -- Specialized RIP print software - built-in color curve, auto-selecting inks - achieve optimal density and superior contrast -- Software Included: USB flash disk containing Printer driver, Manual, Operation Video Print: ________________________________________ --Printing Technology: Advanced Micro Piezo print head with ink-repelling coating technology; 6-channel, inkjet print head -- Print Head: L800 -- Nozzle Configuration: 90 nozzles * 6 -- Minimum Ink Droplet Size: Smallest droplet size 1.5 Picoliters -- Maximum Print Resolution: 5,760 * 1,440 optimized dpi -- Maximum printable area: UV in mode: 16 * 29.7 cm (6.3 inches * 11.7 inches) Non-UV ink mode: 21 * 29.7 cm (8.3 inches * 11.7 inches) -- Maximum material thickness: 5 cm (2 inches) -- Maximum material width: 22.5 cm (8.9 inches) -- Printer table length: 35 cm (13.8 inches) Ink: -- Ink Type & Color: UV ink: Cyan, Magenta, Yellow, Black, White, White -- Optional Ink Type & Color: Textile ink: Cyan, Magenta, Yellow, Black, White, White Edible ink: Cyan, Magenta, Yellow, Black -- Photo Print Speed (A4 size photo mode / 1,440 * 720 dpi): approx. 2 minutes
Introduction The component of carbon molecular sieve (CMS) is carbon. CMS takes the appearance of cylindrical black solid, contains countless 4 angstrom fine pores, it can be used to separate air into nitrogen and oxygen .In industry, CMS can concentrate nitrogen from air with PSA systems. Our CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems. The carbon molecular sieve is widely applied in petroleum chemical industry, the heat treatment of metal, the electronic manufacture and food preservation industries. Physical properties Cylindrical Diameter: 1.3mm 1.6mm 2.2mm Bulk Density: 640-660g/ml Crushing Strength: 100N/p Min Dust level: 100PPM Max Technical Parameter Model Carbon Molecular Sieve Appearance Black, extruded(pellet) Diameter 1.3mm; 1.6mm; 2.2mm or customized Crushing Strength 100N/P min Dust level 100PPM Max Type Adsorbent pressure Nitrogen purity Nitrogen quantity Nitrogen recovery (MPa) (N2%) (NM3/h.t) N2/Air(%) CMS-200 0.8 99.99 70 21 99.9 140 27 99.5 200 36 99 260 41 98 330 48 CMS-220 0.8 99.99 90 25 99.9 160 34 99.5 220 43 99 290 48 98 360 54 CMS-240 0.8 99.99 100 26 99.9 175 35 99.5 240 44 99 300 49 98 370 55 CMS-260 0.8 99.99 110 27 99.9 190 36 99.5 260 45 99 310 50 98 380 56 Typical Application CMS takes the appearance of cylindrical black solid, contains countless 4 angstrom fine pores, it can be used to separate air into nitrogen and oxygen .In industry, CMS can concentrate nitrogen from air with PSA systems. Our CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems. The carbon molecular sieve is widely applied in petroleum chemical industry, the heat treatment of metal, the electronic manufacture and food preservation industries. Package : Plastic drum MOQ: 500 KG Payment Terms: T/T; L/C; PayPal; West Union Warranty: a) shelf time: >3years b) Offer lifetime consultation on problems occurred Container 20GP 40GP Sample order Quantity 10.8 MT 21.6 MT < 5kg Delivery Time 5 days 10 days Stock available Service scope The following merits of service: High ratio performence&price, reducing investment cost and operation cost. Large hardness, little ash, long service life, uniform particles which protests air current impact. Stable quality: Testing strictly according to 100% standard of production and ex-factory testing management. The resin uses in producing the high pure nitrogen with good performance which substitutes the similar import products. Three guarantees
100% Pure Refined CORN Oil For Human Consumption ORIGIN: UKRAINE QUALITY: Established by the International Standards (SGS). Specification: Standard Form of Packing : â?¢ in PET bottles (1L, 3L, 5L) â?¢ in bulk in flexitanks Minimum Order Quantity: 250 MT Production Capacity: 50000 MT per month Shipping Terms FOB or CIF ASWP Payments terms: SBLC or DLC: MT 760 or MT 700 â?? Irrevocable, Unconditional, Transferable, Divisible, Operative, Revolving. Confirmed Bank TOP 50 for SBLC and for DLC confirmed Bank TOP 25. Inspection: SGS or Equivalent CiF PRICE USD: 960$ COMMISSION CHARGED SHIPMENT TIME within 10 days from LC DATE and DELIVERY within 25 to 35 days from the date of bill of ladings depending on the chosen port. NO, TTM/FTF Agricultural products offered by ECO PROM TRADE are grown in clean regions of Ukraine using innovative technologies focused on growing of high-quality crops that meet international standards. All of our products are certified. It is a liquid oil suitable for cooking, baking, frying, in making margarine or our refined corn oil can be bottled as a general-purpose oil, especially for products high in poly-unsaturated fatty acids. ECO PROM TRADE sells this high-quality oil at a very affordable price, we follow a strict procurement procedure that makes sure all our partners meet all food and health requirements in place. We sell refined corn oil, sunflower oil, canola oil, rapeseed oil, soybean oil and extra virgin oil in 1L, 2L, 5L, and 10L and different packaging options can be arranged upon request Specifications for Refined Corn Oil: â?¢ Relative density 0.917-0.925 â?¢ Refractive index (at 40oC) (at 25oC) 1.4650-1.4680 1.4740 1.4700 â?¢ Humidity and volatile substances (Max) 0.20% at 105 0C â?¢ Insoluble impurities including corn seed germ (Max) 0.50% Saponification value (mg potassium hydroxide / g oil) 187 193 â?¢ Unsaponifiable matters (g / kg) max 15.0 â?¢ Soap content (max) 0. 005% â?¢ Total acidity as oleic acid (max) 0.3% â?¢ Acid value (mg potassium hydroxide / g oil) max 0.6 â?¢ Peroxide value (ml equivalent active oxygen/ kg oil) max 10.0 â?¢ Iodine value (Wijs method) 103- 128 Acid % â?¢ Caproic acid (C0:6) â?¢ None Caprylic acid (C0:8) â?¢ None Capric acid (C0:10) â?¢ None Lauric acid (C0:10) â?¢ None 0.3 Myristic acid (C0:14) â?¢ None 0.3 Palmitic acid (C0:16) 8.6 16.5 â?¢ Palmitoleic acid (C1:16) â?¢ None 0.5 Heptadecenoic acid (C0:17) â?¢ None 0.1 Heptadecenoic acid (C1:17) â?¢ None 0.1 Stearic acid (C0:18) â?¢ None 3.3 Oleic acid (C1:18) 20.0-42.2 â?¢ Linoleic acid (C2:18) 34.0-65.5 â?¢ Linoleic acid (C3:18) None- 2.0 â?¢ Arachidic acid (C0:20) 0.3-1.0 â?¢ Gadoleic acid (C1:20) 0.2-0.6 â?¢ Eicosadienoic acid (C2:20) â?¢ None-0.1 Behenic acid None- 0.5 â?¢ Bihenic None 0.5 â?¢ Erucic acid (C1:22) â?¢ None 0.3 Docosadienoic (C2:22) â?¢ None Lignorceric acid (C0:24) None 0.5 Nev
Latex surgical gloves powdered and powder free, latex examination gloves powder and powder free, (single, double, triple and quadruple cpda blood bag) , iv cannula , hypodermic single use syringes 2ml, 3ml, 5ml and 10 ml..
1. Materials: first grade nylon plastic syringe. 2. Dose: 1ml, 2ml, 5ml, 10ml. 3. Dose adjustable: 0.1-2ml or 0.5-5ml adjustable continuous syringe. 4. Features: with 200 ml large & 100 ml small draw-off for directly inserting the liquid bottle to the fixed position, avoid secondary liquid pollution by straightly injection. Good feeling and touching operation handle. 5. Improved design: plastic syringe needle connector cap (needs to loosen the cap for inserting syringe needles) is replaced by metal fixing needle cover for directly insert the syringe needles for injection.
6ml or 11ml syringe containing sterile gel with/without Lidocaine & CHG. 10 ml syringe containing Purified water with 10% glycerine solution. impregnated gauze dressing with paraffin. impregnated gauze dressing with CHA. impregnated gauze dressing with PVP-I. impregnated gauze dressing with Manuka Honey.