Hello, We can supply petroleum products at following price and procedures: Export Grade: LOADING PORTS- ROTTERDAM/HOUSTON Origin: Kazakhstan Payments Term: MT103/23/ TT wire transfer Inspection by: SGS, INTERTEK OR SIMILAR JET FUEL A1 (AVIATION KEROSENE COLONIAL GRADE A1) Quantity: Minimum 1,000,000 BBL spots / Maximum 5,000,000 BBL per month FOB PRICE: Gross USD 90 NET PRICE: USD 86 (Commission: Seller 50 / buyer 50) EN590 (10 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) EN590 (50 PPM) Quantity: 100,000 MT 500,000 with possible Roll & Extension FOB PRICE: Gross USD 420 NET PRICE: USD 400 (Commission: Seller 50 / buyer 50) APPROVED FOB DELIVERY PROCEDURE 1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity 3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyers logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I 4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: - A. Fresh SGS Report (Not older than 72 hours); B. Product Reservoir Receipt; C. Accreditation Certificate; D. Product Passport (Quantity and Quality Analysis); E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR); G. NCNDA/IMFPA (To be completed by all intermediaries); H. Certificate of Product Origin; Authority to Verify (ATV) either physically or otherwise. 5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or INTERTEK) and the needed test are carried out on the product in sellers tanks; 6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately. 7. Seller issues a contract for buyers desired duration upon successful completion of the trial order. All intermediary is paid within 48 hours and seller and buyer consider and sign contract.
Heat Area - 100m2 Dimension(W*H*D) - 450*975*782mm Weight - 70kg Air inlet pipe - 50mm Air outlet pipe - 80mm Auto-burning Time - 13h-27h Fuel Consumption - 0.8-1.8kg/h Efficiency - 90% Hopper Capacity - 20kg Electronic consumption - 100-400w/h Rating voltage - 230v
Head and Shoulders H&S Shampoo 400ml H&Shoulders 180 ml has 4 variants. H&Shoulders 360 ml has 3 variants. Turkish text.Origin country is Romania. 180 ml 1 box - 6 pcs/ 360 ml 1 box-12 pcs If you need more information please let us know. Head & Shoulders Cool Menthol 350ml Head & Shoulders Shampoo Anti Hair Fall 75ml Head & Shoulders Shampoo Anti-hair Fall 170ml Head & Shoulders Shampoo Anti-hair Fall Men... Head & Shoulders Shampoo Clean Balanced 330ml Head & Shoulders Shampoo Clean Balanced 75ml Head & Shoulders Shampoo Cool Menthol 170ml Head & Shoulders Shampoo Cool Menthol 75ml Head & Shoulders Shampoo Lemon Fresh 180ml Head & Shoulders Shampoo Smooth & Silky 75ml Head & Shoulders Smooth & Silky 180ml H&Shoulders 180 ml has 4 variants. H&Shoulders 360 ml has 3 variants. 180 ml 1 box - 6 pcs/ 360 ml 1 box-12 pcs
Features: a) Color: White or white Light Yellow b) Shape: loaf, slice c) Dry ginger sweet smell d) Spicy taste e) No molding f) Impurity: none g) Moisture: 14% h) Usage: grinded to powder i) Used as medicine (extract ), food flavoring
Features: a) Color: White or white Light Yellow b) Shape: loaf, slice c) Dry ginger sweet smell d) Spicy taste e) No molding f) Impurity: none g) Moisture: 14% h) Usage: grinded to powder i) Used as medicine (extract ), food flavoring
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C
pellet machine, with the advantages of low noise, easy and stable operation, high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing. Features : 1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily. 2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding. 3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain. 4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines. 5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.
- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper
- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50 C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
1. Our low sugar instant dry yeast is a kind of baker's instant dry yeast. 2. Quality Product with good effects 3. Our low sugar instant dry yeast is granular and yellowish. Its moisture is not more than 5.5%. Its fermentation ability varies from 500 to 700ml/h and its sugar dosage is between 0-7%. Our low sugar instant dry yeast can be kept for two years. 4. Our low sugar instant dry yeast is packaged in vacuumed aluminum foil sachets then put into a carton. Chemical And Physical Standard Colour-------------------Yellowish brown to light yellow Dry matter----------------min. 94.5% Moisture-----------------max. 5.5% Fermentation-------------min.650mL/hr(CO2) Retention Rate-----------min.80% Microbiological Standard Coliforms---------------max. 90MPN/100g Salmonella--------------absent in 25g Shigella----------------absent in 25g Staphylococcus aureus----absent in 25g Packing Types of yeast 10g low sugar instant dry yeast 11g low sugar instant dry yeast 12g low sugar instant dry yeast 100g low sugar instant dry yeast 125g low sugar instant dry yeast 400g low sugar instant dry yeast 450g low sugar instant dry yeast 500g low sugar instant dry yeast 5kg low sugar instant dry yeast
1. Our low sugar instant dry yeast is a kind of baker's instant dry yeast. 2. Quality Product with good effects 3. Our low sugar instant dry yeast is granular and yellowish. Its moisture is not more than 5.5%. Its fermentation ability varies from 500 to 700ml/h and its sugar dosage is between 0-7%. Our low sugar instant dry yeast can be kept for two years. 4. Our low sugar instant dry yeast is packaged in vacuumed aluminum foil sachets then put into a carton. Chemical And Physical Standard Colour-------------------Yellowish brown to light yellow Dry matter----------------min. 94.5% Moisture-----------------max. 5.5% Fermentation-------------min.650mL/hr(CO2) Retention Rate-----------min.80% Microbiological Standard Coliforms---------------max. 90MPN/100g Salmonella--------------absent in 25g Shigella----------------absent in 25g Staphylococcus aureus----absent in 25g Packing Types of yeast 10g low sugar instant dry yeast 11g low sugar instant dry yeast 12g low sugar instant dry yeast 100g low sugar instant dry yeast 125g low sugar instant dry yeast 400g low sugar instant dry yeast 450g low sugar instant dry yeast 500g low sugar instant dry yeast 5kg low sugar instant dry yeast
*Mens Clothing - Shirts - Trousers *Womens clothing - Tops - Tunics - Dresses - Shirts - Skirts - Shorts - Scarves *Kids clothing - Tops - Tunics - Dresses - Shirts - Skirts - Shorts
Ladies dress, skirt, top, jacket, pants, coat, both in woven and knit styles, kids fashion wear, mens casual wears..Fob, ddp, oem & odm
CR02 Jet A1, EN590 CIF ESCROW PROCEDURE Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan CIF ESCROW PROCEDURE 1. Buyer issues LOI, seller issues FCO for buyer to sign and return with following below: a) Buyer official Irrevocable Corporate Purchase Order (ICPO). b) Buyer company certificate of business incorporation/ registration. c) Buyer Company comprehensive profile. d) Buyer�¢??s Copy of identification materials (international passport). 2. Seller issues SPA to buyer for review/countersign forward back to seller with acceptance letter, and seller issues Product Passport/Company Certificate and appoint Escrow Company in USA for both parties to sign Escrow agreement. Both parties pay consultation costs (1) to the attorney law firm before an escrow agreement can be drafted. 3. Seller and Buyer sign Escrow agreement and buyer makes 10% Escrow deposit of total value products for one shipment and Seller schedules shipment, ships out the cargo to the buyer destination port and sets of Full POP documents below to buyer/delivery documents send to buyer below; All party sign NCNDA/IMFPA. a) Certificate of Authenticity. b) Bill of Lading. c) Q88. d) Packing List Certificate. e) Export Clearance Permit. f) Insurance Policy. g) Commercial Invoice. h) Company registration certificate. i) Certificate of origin GOST. j) Passport of the Product. k) Commitment to Supply. l) Statement of Availability of the Product. m) Export clearance Affidavit. n) Registered, Legalized, Approved SPA. 4. Transaction certificate for 12 months which gives the BUYER the legitimate approval to purchase oil products from the Republic of Kazakhstan for yearly contracts. 5. The Buyer makes the product payment in full via MT-103/TT and Escrow company return 10% Escrow deposit to buyer. Seller transfers the Title Ownership to the Buyer Company and the Seller pay commissions to all involved via NCNDA/IMFPA.
CR03 Jet A1, EN590 FOB CI DIP Procedure Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan FOB CI DIP & PAY Transaction Procedure 1. Seller mandate issues SCO, buyer issues official ICPO including buyer company certificate and buyer international passport to the seller. 2. Seller Acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and return back Commercial Invoice (CI) along with Tank Storage Agreement (TSA). 3. Seller provides Buyer with the Below Listed PPOP: a) Certificate Of Origin b) Dip Test Authorization (DTA) c) Injection Report (IR) 4. Buyer endorse DTA with his Tank Farm or Extend Seller Tank to enable Buyer receive full GPS coordinates of the tanks, Hub Numbers, Terminal Access Permit to dip test in Seller Tank and obtain fresh SGS Report. 5. After a successful Dip Test in Sellers tanks, Buyer takes over sellers tank or Seller injects into buyers vessel / Tank and the buyer makes the payment for the total value of the product injected into the tanks through the means of MT103-TT. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. The seller pays all Intermediaries involved in the transaction Transaction Procedure TTO/OPL/STS 1. Buyer accepts the seller's offer/Procedure, and Buyer will issue an ICPO, CP and Passport Copy. 2. The seller will issue MOU, Cargo Marine Insurance Bid Bond to Buyer for Securing the Vessel and Title Transfer ownership. All parties sign NCNDA/IMFPA. 3. Seller Issues: a) Bill of Lading b) Q88 c) CERTIFICATE OF ORIGIN d) CERTIFICATE OF QUALITY AND QUANTITY (Q&Q) at the Loading port. 4. Buyer pays 1% of the product amount for Cargo Marine Insurance Bid Bond to secure the Vessel and Transfer Title Ownership OR pays $195,000 for Authorization to Board the Vessel at the Destination port as the vessel arrive. Note: Buyer does not have the right to Dip Test the product they have not secured. 5. The seller will issue the following POP documents and order the re-routing of the vessel to the buyer's desired port and transfer the title to the potential buyer's company's name. a) Product Passport (Quantity & Quality Dip Test Analysis Report) b) Certificate of Origin c) Commitment to Supply d) Ullage Report e) Cargo Manifest f) Vessel Q88 g) Title Transfer Invoice h) Fresh SGS Report i) Injection Report 6. The vessel will arrive at the discharge port, and the buyer will carry out the CIQ/SGS inspection. Upon successful inspection, the buyer will make the full payment for the product to the seller through MT103 T/T.
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality: LNG Price TTO $260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Payment Terms MT103/TT/DLC/LC/ESCROW/BTC Below profcedures are NOT NEGOCIABLE. CIF STANDARD TRADING PROCEDURE 1. Buyer issues ICPO with Company Profile and Buyer Passport Copy, Companys registration Copy. 2. Seller acknowledges ICPO and issue to Buyer a Letter of Acceptance and Guarantee. 3. Seller issue Draft Contract SPA to Buyer. Buyer review SPA open for any amendment, sign and return to Seller for approval. 3. Seller registers and legalizes the signed Sales and Purchase Agreement contract and provides the registered, legalized and notarized SPA including PPOP as listed below. A. Certificate of Origin. B. Commitment to Supply. C. certificate of conformity D. Statement of Availability of the product. E. Product Export license for Allocation Issued by Ministry F. Allocation invoice 5. buyer secures allocation from the refinery (securing allocation at buyers expense). 6. Upon buyer securing allocation, Seller issues and register the Full set of POP with the Ministry of Energy and Justice, and with the loading Port Authorities, and charter of vessel for product Shipment. 7. Seller send to Buyer the full set of POP documents, vessel documents including SGS report at Origin Country to Buyer (by Bank to Bank and by email). Loading commence according to shipment schedule for departure from origin port within the specified working days after Buyer final notification of POP verification and Confirmation. POP DOCUMENTS: a)Certificate of Incorporation b )Act of Transfer c) Commercial Invoice d) Company Tax Payers Certificate e) Fresh SGS Report at Loading Port f) Tank Receipt g) Vessel Q&Q and Quality Specification h) Bill of Lading i) Certificate of Non-Wooden Package j)Notice of Readiness (NOR) k) Estimated Time of Arrival (ETA) l) Authorization To Sale (ATS) m) Cargo Declaration / Conforming Warrant n) Charter Party Agreement (CPA) to transport the product to the Discharge Port o) Ullage Report p) Customs Declaration Certificate. q) Product Allocation Certificate r) Notarized NCNDA/IMFPA and Endorsed by Seller Bank 8. within 3 banking days of the Vessel arrival at Buyer destination port, upon Buyers Confirmation and satisfaction with product buyer makes payment via TT/MT103 to Seller against Shipping documents and Title transfer. 9. Product discharged into Buyers storage.
