Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Desiccated coconut, sometimes referred to as Coconut Powder, is a dehydrated form of white coconut meat from freshly selected mature coconut kernels. It is prepared from substantially sound white kernel obtained from the whole nut of coconut (Cocos nucifera). Desiccated coconuts have to be processed in an appropriate manner, undergoing operations such as de-husking (the removal of the husk, leaving the shell intact), hatcheting (the removal of the shell), paring (the removal of the brown skin around the kernel), washing, comminuting, drying (to humidity level below 3%) and sifting. They can be produced without oil extraction or with partial oil extraction by appropriate physical means. Preservatives are allowed for use in production of desiccated coconuts and the most common in practice is sulphur dioxide. Also citric acid is allowed for use as the antioxidant. Table 1: Combined Nomenclature code for desiccated coconuts Number Product 080111 Coconuts, desiccated Product Specification Quality For detailed standard quality requirements please refer to Codex Alimentarius Standard for Desiccated Coconut The basic quality requirements for desiccated coconuts are: Colour: natural white to light creamy Texture: free-flowing and free from yellow specks Flavour: distinctive coconut flavour without off-flavours due to deterioration or absorption of extraneous substances. Odour: The odour shall be characteristic of the product, shall not be mouldy, cheesy, smoky, fermented or rancid, and shall not possess any undesirable odour. Oil content: According to the oil content, desiccated coconuts are in trade practice commonly divided into 2 categories: 1. High fat Desiccated Coconut (sometimes referred as 'full fat') with equal or more than 60% m/m of oil. It is dehydrated form of white coconut meat from freshly selected mature kernels. 2. Low fat Desiccated Coconut with less than 60% m/m of oil. It is a dehydrated form of white coconut meat after extraction of the Coconut milk. The fat content of this product can vary but is usually in the range of 45% - 55%. Additional quality requirements
Roasted Guar Korma has been developed as a product free of antinutritive factors with balanced Amino Acid Profile. Suitable for Poultry, Swine, Ruminant and Aquaculture. Processed with heat and steam, inactivates harmful trypsin inhibitor which indirectly enhances protein and Amino acids digestibility in the product resulting in increased productivity of livestock and poultry. This process also reduces gummy substance by hydrolysing glactomannan and heat breaks cell walls resulting in higher digestibility of Guar Korma. The anti-nutritive trypsin inhibitor is present in both Soybean and Guar seed, but gets inactive when processed into Soybean meal and Guar meal respectively. We have two qualities of Roasted Guar Korma namely ULTRA and PREMIUM In Roasted Guar Korma ULTRA, the minimum protein content is 48 % and in Roasted Guar Korma PREMIUM, the minimum protein content is 55 %. The other nutritional and Amino Acid values of ULTRA and PREMIUM Roasted Guar Korma are listed below:- • Higher percentage of Crude Protein (CP) • Free From Aflatoxins • Higher Digestibility Index, due to the removal of anti-nutritive factors • More desirable and balanced Amino acid Profile • Higher Energy content and fat percentage • Lower percentage of less digestible Fibre • Higher Palatability, complete elimination of characteristic bean odour and taste. • Low content of Total Volatile Nitrogen (TVN) • Free flowing, uniform fine particle size with good fat and water binding ability NUTRITIONAL VALUES ULTRA PREMIUM Protein 48% – 50% 55% – 60% Metabolize Energy 2550 KCal/Kg 2700 KCal/Kg Moisture Less Than 8% Less Than 6% Fiber 6% – 8% 4% – 5% Fat 5.00% 5.00% Ash/ Sand Silica Less Than 2% Less Than 1% Calcium 0.55% 0.55% Phosphorus 0.68% 0.68% Available Phosphorus 0.19% 0.19% Urease Activity Less Than 1% Less Than 1% Pepsin Digestibility 85.00% 85.00% Trypsin Inhibitor Less Than 1 Less Than 1 Aflatoxins NIL NIL Salmonella NIL NIL E.Coli NIL NIL
Sri Raga Peat Coco Pith Blocks are available as Normal blocks, Washed blocks, Extra washed blocks, Fine particles removed premium quality blocks, Extra fibre treated blocks in different grades.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Coco Peat Briquettes are small sized coco peat blocks, available in three standard weights 650 gm, 500 gm & 250 gm, expanding when hydrated to yield a volume of about 3 to 10 litres. Unlike the regular 5 kg blocks, these briquettes are considerably small in size and weight. Consequently, they are much easier to handle and are ideal for use by home gardeners and hobby growers. Usually shrink-wrapped with label, these Coco Peat Briquettes are targeted for retail markets for sale in chain stores and garden centres. Product Specification Cocopeat briquette dimension: 20 x 10 x 3 - 5 cm Sieve Mesh: 4, 6, 8 mm Weight: 650 gm, 500 gm & 250 gm Yield Volume: 5 - 10 liter Load ability: non-Palletized 26 MT/ 40 HC
We are an OEM Garment factory located in Guangdong China. We manufacture according to your design and specifications and provide private label service with custom packaging if required. We pride ourselves in high quality craftsmanship and transparency with our customers. We try our best to keep MOQ to a minimal and assist our new customers anyway we can; as reference, our MOQ for low ankle sport socks ranges from 5000-10,000 pairs per fabric SKU. If you have ready designs/logos and would like a mockup sample we will produce them free of charge for your consideration. On-site factory visits are encouraged and welcome.
We offer innovative blends in Cocopeat blocks in two variants: Low EC and High EC. The offered coco peat is washed, dried and compressed into 5 kg blocks. It serves as an ideal soil conditioner and growing medium that can withstand high compaction once hydrated. Coco peat blocks are 100% soil less growing medium which can be used for both conditioning the soil and mulching agent purposes. â?¢ Coco peat is an ideal soil amendment for container and pot gardening because of its ability to store and slowly release nutrients over time. This ensures that plants have access to a steady supply of essential nutrients, helping them thrive in their environment. Blends: 100% Organic Cocopeat80% Organic Cocopeat + 20% Husk Chips 60% Organic Cocopeat + 20% Cut Fiber + 20% Husk Chips 90% Organic Cocopeat + 10% Pearlite 95% Organic Cocopeat + 5% Neem cake
Block Size: 30 x 30 x 15 cm ( or - 2 cm) Fiber length: Less than 2cm Weight : 5kg (+/- 3%) Electric Conductivity (E.C): High EC (Animal Bedding) ( 5.5 TO 6.5) Low EC (For Plant Growth) < 0.5-0.8 ms/cm Impurities/Sand 3% Max Moisture: 15-20% Max PH: 5.8 to 6.8 Compression Ratio: Over 75 Liters / Block Packaging: As per requirement, non-palletized (will be bare block loading on container floor, 26 metric ton per 40 feet container or Palletized, stretch, wrapped and strapped. PP, 16-22kg/bag, 186-192 blocks per pallet. 24 pallets per 40' container ~ 16-18 MTS
Specifications for 5 kg block of coco peat for animal bedding high ec Compression ratio : 1.5 Breakout volume : 70 to 75 liters Weight : 5 kg + 0.200 gram Size :30*30*10-12 cm Impurity
Weight: 5Kg +/- 100g Size: 30 x 30 x 15cm Cpmpression Ratio: 5:1 Moisture: < 20% Packing: 224 x 20 Pallets 4480 Bales 22.0Mt Load Ability: 40ft HC
Greenland Fresco as a leading exporter of fresh Onions has always been to provide the superior quality of fresh onions to our valuable clients. Red onions of INDIA are well known for their color, taste & its nutritional value. The bulbs that we select for export are very consistent size, shape & color. As one among the top exporter of fresh onions from India, we take at most care about our product till it reaches our client. In addition to that we provide clear communication to our client on regular bases & accord a great value & importance to our corporate partnership which is based on ethics & integrity. Specifications : - Color - Red & White Size - 25/30/40/50/60/70 mm Packaging Type - Mesh bags / Jute bags Net Weight - 5Kg/10Kg/20Kg/50Kg Availability - Throughout the year Health Benefits : 1. Onions are very rich in Folic acid dietary fiber and Vitamin C 2. The onions are observed to be low in saturated fat, sodium & cholesterol and are known to lower the risks related to heart disease. 3. Onion help in controlling blood sugar. 4. Onions have antibacterial properties. 5. Onion helps in strengthening our body.
Coco Peat Block High EC
[supplier] Product description 100% coco peat, High EC - Seived, UnWashed Colour Brown Weight 5kg (± 200grams) Dimensions 30cm x 30cm x 10 - 15cm, Compression Ratio 1:5, EC value 500Ms/cm (1:1.5), PH value 5.8 - 7.00, Fiber level Below 5%, Fiber Size 6mm, Moisture level 10% to 15% Max, Sand level below 5%, Expansion 15+litres/kg, Packing Bulk, Pallet
[supplier] Product description 100% coco peat, High EC - Semi Seived, UnWashed, Colour Brown, Weight 5kg (± 200grams), Dimensions 30cm x 30cm x 10 - 15cm, Compression Ratio 1:5, EC value 500Ms/cm (1:1.5), PH value 5.8 - 7.00, Fiber level Below 10%, Fiber Size 8mm, Moisture level 10% to 15% Max, Sand level below 10%, Expansion 13-14 litres/kg, Packing Bulk, Pallet
[supplier] Product description 100% coco peat, High EC UnSeived, UnWashed, Colour Brown, Weight 5kg (+/- 200grams), Dimensions 30cm x 30cm x 10 - 15cm, Compression Ratio 1:5, EC value 500Ms/cm (1:1.5), PH value 5.8 7.00, Fiber level Nil, Fiber Size Nil, Moisture level 10% to 15% Max, Sand level below 15%, Expansion 12 litres/kg, Packing Bulk, Pallet
Coconut fibre (coir mattress fiber bale) and coco peat products (650g / 5kg / grow bags).
Coco peat Quality : GRADE A Product Description : 100% cocopeat, Low EC Colour : Brown Weight : 5kg Dimensions : 30cm x 30cm x 10-15sm Compression Ratio : 5:1 EC Value : PH Value : 5.8-6.8 Fibre Level : below 5% Fibre Size : 6mm Moisture Level : 10% to 15% max Sand Level : below 5% Expansion : 18litres/kg Packing : Bulk, Pallet