Basicity (CaO + MgO + A12O3)/Si02 = 1.60 min Moisture content (%) = 10.0 Max Magnesium Oxide content (MgO) (%) = 10.0 Max Loss on Ignition (%) = 0.50 Max Size :< 5mm (%) = 90.0 Min Calcium Oxide (CaO) (%) = 36.0 Min Glass content (%) = 95.0 Min
Calcium aluminate advantages: 1) Uniform chemical compositions, low melting point, high melting speed, and short smelting time; 2) It has no fluoride and doesnt erode furnace lining and ladle, and it is compact, non-absorbent,and easy to storage as well; 3) Stable phase and fast dust-reducing speed, rapid desulfurization effect stabilized at 60%, and suppresses phosphorus into molten steel; 4) Improving the protective effect and reducing erosion to ladle lining.
Dates, olive oil, olive, salt, fruits and vegetables, cement, gypsum, silica sand, clinker, lime, dolomite, bentonite, kaolin products, dolomite lime, marble powder, marble grit, granulated slag, steel slag, carton boxes..
There are two types of Ferro-nickel slags that we have as below. Both products are manufactured in Korea and waiting for your offers. Since details such as Incoterms, payment terms, price, volume are subject to further discussion, please contact me through mail first. 1) Ferro nickel slag (which is generated after refining at furnace) -. Contents : NiO : 4-6% / Sio2 : 20-25% / Cao : 25 -30% / MgO 2% / Fe: 17-22% / Al2O3 : 4-6% -. Application : Nickel source 2) Ferro nickel slag (which is manufactured during slag tapping) -. Contents : Sio2 : 50-55% / MgO : 30-35% / Fe : 6-7% / Al2O3 : 2% CaO : 0.5 / Mn : 0.3 -. Application : Sand-blasting, Molding sand, Abrasive, Aggregate etc.. I appreciate your efforts in advance. Best regards,
We supply and export FerroNickel Electrofurnance Slag. Our Slags are registered under REACH regulation. Conditions are FOB Durr�«s Port in Albany. Application: Sandblasting / High density submarine oil and gas pipe coating aggregate / Additional iron to clinker (Substituting the raw material in cement industries with our slag allows deduction of the ton of CO2 that plants would otherwise have accounted in their carbon balance) / Railway ballast / High strength concrete / Beach aggregate / Granular base for road construction. Most common ingredients: Ingredient and Content Classification (CLP) Silicon Dioxide 30 - 50% Iron 15 - 35% Magnesium Oxide 13 20% Aluminium Oxide 1 4% Chromium (III) Oxide 1.4 3% Nickel < 0.15% Sulfur 0.1% Calcium oxide 3 5%
Blast Furnace Slag
The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag.
1.- PRICE: 40,00 US$ per ton 2.- PRODUCT: Electric steelmill slag (iron slag) Mining material from primary metallurgy or smelting of raw materials that are generated in electric arc furnaces. 5.-SPECIFICATIONS: Contained in the Attached Technical Sheet 6.- MONTHLY SUPPLY AMOUNT 100,000 metric tons or more monthly. (Shipment 25.000 MT) 7.- TOTAL AMOUNT OF ANNUAL SUPPLY 1,200,000 metric tons per year, at a rate of 100,000 MT per month. The selling company is capable of supplying, through a firm, definitive and direct sale, the amount of one million two hundred thousand metric tons (1,200,000 MT) per year. In the event that the buying company decides to buy a smaller volume of the product, it could do so, from a minimum of four hundred thousand MT (400,000 MT), for its withdrawal within a period of four (4) months, from the date of the respective contract, because the company has a monthly supply capacity of 200,000 tm of said product
We are the supplier of Processed Copper Slag. Cu - 0.60-0.70, Fe - 55-60, SiO - 26-30, AI 1.0 - 3.0, FeO 1.0 - 2.0, Angular, Sharp Edgues, Multi faced. Kindly send inquiry for more detail for product and price negotiation.
granulated blast furnace slag (a) Ca O: 30 to 38 % (b) Si O2:30to 40 % (c)Al 2O3:15 to22% (d)MgO:8 to11% (e) Fe O: 0.49% (f) MnO: 2% (g) Glass Content: 90% Max If u want more quantity i can supply frequently.
I sell ggbs GGBS has all tests and certificates granulation 0-10mm Price 95Euro/t Slawkow Poland
I will sell Ground granulated blast-furnace slag Price 80-90Euro/MT Slawkow Poland
We can offer Granulated Blast Furnace Slag from India. Cao 32 to 41 SiO2 31 -39 Al2 O3 13- 21 MgO 6 - 11 FeO 4 MnO 2 Moisture Avg 12% maz 20% Glass content 93% max
Moisture - 18.2% SiO2 - 32.3% Ai2O3 - 13.6% Fe - 0.71% TiO2 - 0.70% Sulphur - 0.07% CaO - 40.1% MnO - 0.59% MgO - 6.70% We have supply granulated blast furnace slag, if interest kindly please send an inquiry to us.
Ground Granulated Blast furnace Slag conforming BS EN 15167-1 & ASTM C 989-09.
Cobalt hydroxide, cobalt ore, cobalt metal, copper concentrate, copper cathodes, copper ore, copper blister, copper slag, precious metal, lead ore, zinc concentrate, zinc ore, shg zinc metal, nmc film scrap, lico battery scrap, nico battery scrap, black mass, iron ore, manganese ore, steel scrap, steel and cast iron skulls, pig iron. tantalum, molybdenum, titanium, niobium, tungsten, copper cathodes 99,99 grade a..
Silicon Slag Silicon Metal Slagis a byproduct from the manufacture of silicon metal it is a kind of mixture which contains the main content Silicon 3565 and other components such as C S P Al etc It is a good substitute for FeSi in steel making which has advantage in lowing the cost of production and reusing resource Usually we use silicon slag to produce silicon briquette which is far and wide market in domestic and internationalour silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors Aluminum manufactures to improve the useful properties of aluminum as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic
Crushed stone from blast-furnace and steelmaking slag for general construction works, fractions: over (from) 3 to 10 mm incl., from 10 to 20 mm incl., from 20-40 mm incl., from 40 to 70 mm incl., from 70 to 300 mm, DKPP code 08.12.13 (State Classifier of Goods and Services) We have 1000 000 Tons for export
Characteristics of sintered calcium aluminate: 1) Uniform chemical composition, low melting point and fast melting speed can shorten the refining time; 2) No fluorine, no erosion of furnace lining and ladle; 3) Compact structure, no water absorption, easy storage and transportation; 4) Due to the stable phase and fast slag formation, it can reduce the dust pollution to the iron and steel plant and comprehensively stabilize the refining process; 5) It does not contain impurities such as hydrogen, nitrogen and carbon, which is conducive to improving the quality of steel. Sintered calcium aluminate (premelted aluminum calcium slag) is mainly used in LF furnace, open hearth furnace and converter ladle refining to remove impurities such as sulfur and oxygen in molten steel and reduce the content of harmful elements and impurities in steel. It is suitable for ordinary carbon steel, high carbon steel, high and low alloy steel.
Additives for concrete, cement, plastering mortar, reinforce weak ground, improve soil Benefits Reducing hydration, increasing waterproofing, increasing durability, reducing costs for concrete