I sell ggbs
GGBS has all tests and certificates
granulation 0-10mm
Price 95Euro/t Slawkow Poland
GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.
I will sell Ground granulated blast-furnace slag Price 80-90Euro/MT Slawkow Poland
Ground Granulated Blast furnace Slag conforming BS EN 15167-1 & ASTM C 989-09.
Ground granulated blast furnace slag (GGBS) is a by-product from the blast-furnaces used to make iron. Blast furnaces are fed with controlled mixture of iron-ore, coke and limestone, and operated at a temperature of about 1,500�°C. When iron-ore, coke and limestone melt in the blast furnace, two products are producedâ??molten iron, and molten slag. The molten slag is lighter and floats on the top of the molten iron. The molten slag comprises mostly silicates and alumina from the original iron ore, combined with some oxides from the limestone. The process of granulating the slag involves cooling of molten slag through high-pressure water jets. This rapidly quenches the slag and forms granular particles generally not bigger than 5 mm. The rapid cooling prevents the formation of larger crystals, and the resulting granular material comprises around 95% non-crystalline calcium-alumino silicates. The granulated slag is further processed by drying and then grinding in a vertical roller mill/rotating ball mill to a very fine powder, which is GGBS. Applications of GGBS Powder �· Replacement of cement for super structure Ready Mix Concrete Cement Manufacturing Precast Manufacturing Packing Details: 25 kg HDPE Bags, 50 Kg HDPE Bags, 1 ton Jumbo Bags and As per Customer's requirements
Ground granulated blast-furnace slag. lump and powder.
S.NO Characteristic Requirement as per IS 16714:2018 Test Result 1 Fineness (M2/KG) 320 (Min.) 388.00 2 Specific Gravity 2.92 3 Residue by wet basis on 45μ 4.76 4 Manganese oxide (MnO) % 5.50 (Max) 0.26 5 Magnesium oxide (MgO) % 17.00 (Max.) 8.01 6 Sulphide Sulphur (S) % 2.00 (Max.) 0.49 7 Sulfate (as SO3) % 3.00 (Max.) 0.25 8 Insoluble residue, % 3.00 (Max.) 0.20 9 Chloride content % 0.10 (Max.) 0.002 10 Loss on ignition, % 3.00 (Max.) 0.34 11 Moisture content % 1.00 (Max.) 0.01 12 Glass content % 85 (Min.) 97.4 13 Slag Activity Index (SAI) (%) A 7 days Not less than 60 % of control OPC 43 Grade cement mortar cube 79.72 B 28 days Not less than 75 % of control OPC 43 Grade cement mortar cube 112.15 15 Chemical Moduli A (CaO + MgO + 1/3Al2O3) / SiO2+2/3Al2O3 1.00 (Min) 1.10 B CaO + MgO + Al2O3 / SiO2 1.00 (Min) 1.81 19 (CaO + MgO + 1/2MgO + Al2O3) / SiO2 + MnO 1.50 (Min) 2.19
Ground Granulated Blast Furnace Slag
Ground Granulated Blast Furnace Slag
Supplier: Ground Granulated Blast Furnace Slag
