High Density Pvc Foam Sheet Suppliers and Manufacturers

Natural fibers present important advantages such as low density, appropriate stiffness and mechanical properties and high disposability and renewability. Moreover, they are recyclable and biodegradable. There has been lot of research on use of natural fibers in reinforcements.

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Potato starch is a very refined gluten-free starch, containing minimal protein or fat. This gives the powder a clear white color, and the cooked starch has typical characteristics of neutral taste, good clarity, high binding strength, long texture, and a minimal tendency to foam or yellowing of the solution. It is used in food & technical application. Native Potato Starch Used as Thickener, Bulking agent, Stabilizer, Water binder Applications: Thickener in sauce, soup, dairy desserts and snack products

Potato starch is a very refined gluten-free starch, containing minimal protein or fat. This gives the powder a clear white color, and the cooked starch has typical characteristics of neutral taste, good clarity, high binding strength, long texture, and a minimal tendency to foam or yellowing of the solution. It is used in food & technical application. Native Potato Starch Used as Thickener, Bulking agent, Stabilizer, Water binder Applications: Thickener in sauce, soup, dairy desserts and snack products

Potato starch is a very refined gluten-free starch, containing minimal protein or fat. This gives the powder a clear white color, and the cooked starch has typical characteristics of neutral taste, good clarity, high binding strength, long texture, and a minimal tendency to foam or yellowing of the solution. It is used in food & technical application. Native Potato Starch Used as Thickener, Bulking agent, Stabilizer, Water binder Applications: Thickener in sauce, soup, dairy desserts and snack products

A luxury floating food tray in the pool is used at swimming pools, resorts, villas,... Using high-quality material through skillful hands of craftsman creates luxurious products, with many colors, designs for you to enjoy relaxing moments. MATERIAL: Poly Rattan, and a foam layer below the bottom of the tray COLOR: White, Black, Gray, Light Yellow,... SIZE: Many sizes depends on each shape USAGE: Perfect for serving party or breakfast in swimming pools or used as decorative items

Luxury floating food tray in the pool is used at swimming pools, resorts, villas,... Using high quality material through skillful hands of craftman creates luxurious products, with many colors, designs for you to enjoy relaxing moments. MATERIAL: Poly Rattan, and a foam layer below the bottom of the tray COLOR: White, Black, Gray, Light Yellow,... SIZE: Many sizes depends on each shape USAGE: Perfect for serving party or breakfast in swimming pools or used as a decorative items

Our gardening bamboo series mainly include: tonkin bamboo canes(poles,stakes), bamboo flower sticks. Make from high quality tonkin bamboo poles, very strong, resistant,thick wall and good fibre density. Bamboo Poles was tricted quality control system guarantee steady product quality.

2024 Marine water proof Plywood * Marine Plywood made from Meranti wood species Size by demand , container Flooring replacement 28mm x 1220mm x 2440mm * Multi Purposes for water proof out door application + Both faces made from Meranti veneer * Mix Meranti Core , high density * WBP Water resistant Glue * Common Size 28mm x 1220mm x 2440mm or by demand = 12 pcs/cbm * All sizes available by deamnd * 4 sides seaedl by water proof acrylic paint * MOQ = Loading in 40 ft approx 48 cbm = 576 pcs in 16 pallets *** * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost

We are supplier and exporter of Hematite Powder. Hematite Powder is a mineral, coloured black to steel. It is mined as a main of iron ore and used as a weighting agent in oil drilling. It is the mineral form of iron(III) oxide (Fe2O3). Fluids weighted with API Hematite Powder contain fewer solids by volume than, making higher mud fluids possible. API Grade Hematite Powder is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It is used as a density increasing product, used as a weighting agent and in the paint industry. Hematite is also a harder mineral than Barite so it is more resistant to particle size degradation. High Density Hematite Powder API Grade -SG = 5.19 - 5.47 -Fe2O3 = 96.70% -Fe = 71.82% -SiO2 = 0.89% -Mesh Size (passing at 98%) = 325

Type: Chopping Blocks Commercial Buyer: Restaurants, Food & Beverage Stores, Food & Beverage Manufacture, Department Stores Season: Everyday Room Space: Kitchen, Dining Room Design Style: Modern Material: Bamboo/Wooden Feature: Sustainable Place of Origin: Vietnam Brand Name: 99 GOLD DATA Model Number: Selena +84 587 176 063 Product name: Cutting Board Usage: Kitchenware Color: Customized Color Keyword: Custom Chopping Board Function: Cutting Food Board MOQ: 1000pcs OEM & ODM: Accepptable High Quality: 100% Eco-friendly Description: Chopping Cutting Board Blocks PAYMENT: TT 30% Deposit Supply Ability 20000 Piece/Pieces per Month Packaging Details Poly bag;Shrink package;White box;Color box;PVC box;PDQ display box Port All port in Vietnam

Our Joss Powder is made completely from red bark, green bark, and leaves of Litsea Glutinosa tree in the central Highland of Vietnam. We can supply various assortments of Joss powder from low viscosity to very high quality as per the client's demand. PRODUCT: JOSS POWDER Color: Bright brown Odor: Faint aroma Raw material: The cortex of stark / no chemicals Use: For making incense, mosquito coil Density (g/ml): 0.41-0.67 Mesh Size 80(%): Min 90% Water Content: 10-13% Kinds: 3 Cups to 36 Cups

PVC regrind mix colors MATERIAL : PVC regrind mix colors CATEGORY : PVC TYPE : Regrind GRADE : Mixed SPECIFICATION : PVC regrind white, regrinded from sheet ORIGIN : Japan LOADING WEIGHT : 33 FOB (USD/Ton) : CFR (USD/Ton): 600-800

SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

2Lians can supply below scrap product: PVC Repro Pellet (Soft) Black Color Plastic Scrap MATERIAL: PVC repro pellet (soft) black color CATEGORY: PVC TYPE: Repro pellet (soft) GRADE: Black color SPECIFICATION: Soft PVC repro pellet (hot-cut),made from PVC cable skin can be contained 10% of XLPE and/or other dust. Can be used for making soft PVC pipe/cable or floor sheet. 80MT monthly supply. ORIGIN: Japan LOADING WEIGHT: 20 Tons FOB (USD/Ton): 850-950

PVC Car Stop Block Black Color For Sales MATERIAL : PVC car stop block black color CATEGORY : PVC TYPE : car stop block GRADE : black color SPECIFICATION : "This is a material originally processed from electric wires. After that, it was made as a sheet-shaped product for use in car insoles, car stop block products and bag insoles products. Therefore, 100% PVC is not accurate. A little bit PE is mixed. 2000MT available" ORIGIN : Japan LOADING WEIGHT : 20-22 MT FAS (USD/Ton) : 200-350